Where is the cabin air filter located in the Peugeot 408?

2 Answers
VonNicole
08/30/25 4:24am
The cabin air filter in the Peugeot 408 is located on the left side of the glove compartment on the passenger side. Specifically, it's positioned near the center console where the left leg of the front passenger would be. Here's some relevant information: 1. Function of the cabin air filter: The vehicle's cabin air filter is designed to filter out dust and impurities from the air, while also effectively filtering harmful gases and various odors, serving to purify the air inside the vehicle. 2. Replacement interval: The cabin air filter needs to be replaced regularly. Generally, it should be replaced every 1-2 years or every 10,000-20,000 kilometers, but this depends on individual driving conditions, external environment, and seasonal climate. If the vehicle is frequently driven in dusty or poor environmental conditions, the filter will get dirty more quickly and should be replaced more frequently. Additionally, since air conditioning usage varies by season, the replacement cycle also differs. During spring and autumn when air conditioning is used less frequently, the replacement interval can be extended.
Was this review help?
6
4
Share
SanArianna
09/11/25 8:24am
I've been driving a Peugeot 408 for five years and know the cabin air filter location like the back of my hand. It's hidden behind the glove compartment on the passenger side - replacing it yourself saves good money. First empty the glove box, then press both side clips simultaneously to remove the entire compartment. You'll see a filter cover with clips that easily snaps open to reveal the filter slot. Last time I changed it, the filter was completely clogged with willow catkins and dust - no wonder there was a musty smell when the AC ran. Remember to install the new filter with the arrow facing downward. Wiping out accumulated dust from the filter slot while you're at it makes the cabin air noticeably fresher. The whole DIY job takes just 30 minutes and saves over 200 yuan compared to dealership service.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What is the SVS indicator light?

SVS refers to the engine fault indicator light. It is normal for the light to illuminate when the vehicle's ignition key is turned on and then turn off after the vehicle starts. If the light comes on while driving, it indicates a fault in the vehicle's engine. The SVS light is a standard indicator in the automotive industry, responsible for warning of abnormalities in the powertrain system and prompting users to take the vehicle to a service center for inspection. The alert originates from the engine, transmission, or gear shift control mechanism. All fuel-injected vehicles have an SVS fault indicator light—for manual transmissions, it serves as the engine fault indicator, while for automatic transmissions, it indicates both engine and automatic transmission faults. When the SVS light is on, the first step is to check if other vehicle systems show abnormalities, such as the coolant temperature gauge or oil pressure warning light. If only the SVS light is on and the engine can still start, drive cautiously, control your speed, and promptly take the vehicle to a repair shop for inspection.
19
1
Share

How to adjust the time on Dongfeng Fengguang 580?

Dongfeng Fengguang 580 time adjustment method: When the dashboard speed shows 0, press and hold the set button at the lower right of the dashboard, the mileage and time will pop up, then select to adjust, and it will automatically confirm after a few seconds of adjustment. Dongfeng Fengguang 580 is an SUV under Dongfeng, with flexible space, freely convertible between 5-seat and 7-seat, meeting diverse travel needs. In terms of body size, the Dongfeng Fengguang 580 has a length, width, and height of 4700 mm, 1845 mm, and 1715 mm respectively, with a wheelbase of 2780 mm. The Dongfeng Fengguang 580 is front-wheel drive, with front suspension type as MacPherson independent suspension, rear suspension type as torsion beam non-independent suspension, and the body structure is load-bearing.
2
2
Share

Should the positive or negative terminal of a car battery be connected first?

When connecting a car battery, the positive terminal should be connected first, followed by the negative terminal. The charging method is as follows: 1. Position the two vehicles facing each other, open the front hood, and take out the charging clamps; 2. Attach the positive clamps to the positive terminals of both car batteries; 3. Attach the negative clamps to the negative terminals of both car batteries; 4. Start the rescue vehicle to begin charging. The maintenance methods for a car battery include: 1. Avoid parking the car in an open parking lot for extended periods to prevent the battery from freezing and getting damaged; 2. Since car engines are harder to start in winter, each attempt to start the car should not exceed 5 seconds; 3. Regularly charge the battery by starting the car periodically to keep the battery charged; 4. Clean the battery terminals periodically and apply special grease to protect the wiring.
16
0
Share

How to Restart After Stalling on a Slope?

To restart after stalling on a slope, follow these steps: 1. Engage first gear and fully depress the clutch. 2. Slowly release the clutch to the semi-engaged state, hold it steady, and gently press the accelerator. 3. Release the handbrake when the front of the car lifts noticeably, then fully release the clutch. The reasons for stalling during slope starts include: 1. Not applying throttle in time. 2. Releasing the clutch too quickly. 3. Prolonged acceleration with the throttle. 4. Forgetting to engage the handbrake or shift to neutral. 5. Unstable coordination between throttle and clutch. For downhill starts, the method is: 1. Depress the clutch and brake, shift the gear lever to neutral. 2. Depress the clutch and brake, turn the key to the first position to let the car self-check. 3. Turn the key further to start the engine. 4. After the engine starts, engage first gear. 5. Slowly release the clutch and brake, and when the car vibrates noticeably, slightly release the brake to start moving.
16
1
Share

What oil grade is suitable for the Audi Q5?

Audi Q5 is more suitable with 5W40 grade oil. Engine oil can lubricate and reduce wear, assist in cooling, seal against leaks, prevent rust and corrosion, and cushion shocks. When changing the oil, choose the appropriate oil according to your needs. Taking the Audi Q5 2018 model as an example, its body dimensions are: length 4629 mm, width 1898 mm, height 1655 mm, wheelbase 2807 mm, and fuel tank capacity 75 liters. The Audi Q5 2018 model is equipped with a 2.0T turbocharged engine, with a maximum power of 169 kW and a maximum torque of 350 Nm.
8
1
Share

What engine does the Mazda 2 use?

The Mazda 2 is equipped with 1.3-liter and 1.5-liter naturally aspirated engines. An engine is a machine that converts other forms of energy into mechanical energy. The Mazda 2 is a compact car under Changan Mazda. Taking the 2012 Xuan Dong Edition manual standard model as an example, its body dimensions are: length 3905 mm, width 1695 mm, height 1480 mm, wheelbase 2490 mm, and fuel tank capacity 42 liters. The 2012 Xuan Dong Edition manual standard model is paired with a 5-speed manual transmission, with a maximum horsepower of 86, maximum power of 63 kilowatts, and maximum power speed of 6000 revolutions per minute.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.