Where is the cabin air filter located in the Peugeot 301?

1 Answers
LaJuliana
07/30/25 3:39am
The cabin air filter in the Peugeot 301 is located inside the glove compartment under the front passenger seat. After removing the screws and taking off the small cover plate, you can then remove the larger white screws to take off the long strip cover plate to access it. If replacement is needed, you can visit a repair shop for assistance. The cabin air filter, commonly known as the pollen filter, serves to filter the air entering the vehicle interior from the outside, improving air cleanliness by removing impurities, tiny particles, pollen, bacteria, industrial exhaust, dust, and other contaminants. The Dongfeng Peugeot 301 is a compact sedan with a 4-door, 5-seat configuration. Its dimensions are 4442mm in length, 1748mm in width, and 1476mm in height, with a wheelbase of 2652mm.
Was this review help?
11
4
Share
More Forum Discussions

What is the actual fuel consumption of the Verna 1.4 manual?

The Verna's fuel consumption is 5.6 liters per 100 kilometers. Here are the relevant details: 1. The Verna is a compact sedan under Hyundai, equipped with a 1.4L naturally aspirated engine across all models. The Verna measures 4300mm in length, 1705mm in width, 1460mm in height, with a wheelbase of 2570mm. 2. Constant-speed fuel consumption refers to the vehicle's fuel consumption per 100 kilometers obtained in constant-speed driving fuel consumption tests as stipulated by national standards for certain types of vehicles. These vehicle types include: (1) M1 category, M2 category with a maximum design total mass not exceeding 3.5 tons, and N1 category compressed natural gas vehicles; maximum design total mass not exceeding 3.5 tons. M1 category and N1 category vehicles follow the test methods specified in GB/T12545.1-2008 "Test methods for fuel consumption of passenger vehicles". (2) M2 category, M3 category with a maximum design total mass exceeding 3.5 tons, and N2 category, N3 category compressed natural gas vehicles; M2 category, M3 category, and N category vehicles with a maximum total mass greater than or equal to 2 tons follow the test methods specified in GB/T12545.2-2001 "Test methods for fuel consumption of commercial vehicles".
20
1
Share

Can a 60-year-old get a driver's license?

People aged 60 to 70 can obtain a driver's license. Those between 60 and 70 years old are eligible to apply for licenses for small cars (C1), small automatic transmission cars (C2), small automatic transmission passenger cars for the disabled (C5), and light motorcycles (F). The required documents for applying for a driver's license are as follows: 1. "Motor Vehicle Driver's License Application Form". 2. "Physical Condition Certificate for Motor Vehicle Drivers" issued by a medical institution at or above the county level or a military regiment level. 3. Original and photocopy of the applicant's valid identity document. 4. Eight recent one-inch white-background color photos without hats.
17
5
Share

What brand is Kapsen tires?

Kapsen is a tire brand under Compassson. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Installed on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee the vehicle's driving performance. The functions of tires are: 1. Directly contacting the road surface and working with the vehicle suspension to mitigate impacts during driving; 2. Ensuring good ride comfort and smooth driving; 3. Ensuring excellent adhesion between the wheels and the road surface; 4. Improving the vehicle's traction, braking, and off-road capabilities; 5. Bearing the weight of the vehicle. Tires can be categorized by their usage as follows: 1. Passenger tires; 2. Summer tires; 3. Summer high-performance tires; 4. Winter tires.
4
5
Share

Why does the Passat's autohold not respond when pressed?

Here are the reasons why the Passat's autohold does not respond when pressed: 1. The vehicle is not in the started state; 2. The door is not properly closed; 3. The ESP is not working properly; 4. The seat belt is not fastened. 5. If any of the above conditions exist, the autohold cannot be activated normally. Additional Information: 1. AUTO-HOLD is the function button for automatic parking, which is available in many models equipped with electronic (electronic handbrake) rear wheel braking systems. It refers to the function where the vehicle automatically enters the parking brake through the ABS/ESP control unit when needed. AUTO-HOLD relies on the intelligent braking system, and only vehicles with brake control systems like ESP can achieve the AUTO-HOLD function. 2. The AUTO-HOLD automatic parking function provides accurate parking force through the slope sensor by the controller. When starting, the parking control unit calculates information provided by the clutch distance sensor, clutch engagement speed sensor, throttle pedal sensor, etc. It automatically releases the parking brake when the driving force is greater than the driving resistance, allowing the car to start smoothly.
20
3
Share

Which gear should be used when driving a manual transmission car downhill?

For a manual transmission car, it is necessary to shift into the appropriate gear before going downhill, typically second or third gear. The lower the gear, the stronger the car's power and the slower the speed. Here are some relevant details: 1. When going downhill, you can use engine braking. This requires continuously downshifting while descending, combined with the foot brake to gradually reduce speed. First, use the brake pedal to slow down, then downshift as the speed decreases slightly. Repeat this process—braking, downshifting, and braking again—until you reach the lowest gear, then use intermittent braking to complete the descent. 2. When using engine braking downhill, be cautious. If the car is moving at high speed and suddenly shifts into a lower gear, the engine will rev sharply. Since the speed cannot increase further when the engine reaches its maximum RPM, although there is some braking effect, it can cause significant wear on the engine. 3. If the vehicle is equipped with HDC (Hill Descent Control), simply activate the system (by pressing the button). In theory, the driver does not need to press the brake pedal, as the vehicle will automatically move at a low speed and apply braking force to wheels exceeding safe RPM, ensuring a smooth descent.
3
1
Share

How to Replace the Wiper Blade on a Window Cleaner?

Use a Phillips screwdriver to remove the two screws on the window cleaner, open the cover plate, insert the rubber blade, close the cover plate, and tighten the screws. Due to the different structures of double-sided window cleaners, the installation methods of rubber wiper blades also vary. There are roughly three types: 1. The rubber wiper blade is installed inside the plastic shell. This structure requires using a screwdriver to unscrew the screws, open the plastic shell, remove the old blade, and replace it with a new one. Some window cleaners have circular decorative covers over the screws, which need to be pried off first. When replacing the blade, be careful not to disturb the internal magnetic steel. 2. The rubber wiper blade is inserted from the side. This structure only requires pulling out the blade from the side of the window cleaner and inserting a new one, without disassembling the product. Ensure the blade is inserted properly. 3. The rubber wiper blade is inserted from the middle of the plastic shell. This is a new structure that requires first removing the blade fixing piece, pulling out the blade from the middle of the shell, inserting a new blade, and then installing the blade fixing piece. This also does not require disassembling the product.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.