Where is the cabin air filter located in the old Teana?

1 Answers
McMia
07/30/25 5:53am
The cabin air filter in the old Teana is located behind the glove box on the passenger side. After removing the glove box, you can replace the cabin air filter. Here is some related information about the Teana: 1. The Teana is a mid-size sedan under Nissan: This car has been quite popular among consumers in the domestic market. The new Teana has adopted a more youthful design approach. Previously, the Teana was often the choice of middle-aged men, but the new Teana can also appeal to younger consumers or those seeking a sporty ride. The new Teana is equipped with two types of engines: one is a 2.0-liter naturally aspirated engine, and the other is a 2.0-liter turbocharged engine. The 2.0-liter naturally aspirated engine, codenamed MR20, has a maximum power of 117 kW, a maximum torque of 208 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4400 rpm. This engine features a continuous variable valve timing system and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. The 2.0-liter turbocharged engine, codenamed KR20, has a maximum power of 185 kW, a maximum torque of 380 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed of 4000 rpm. This engine incorporates variable compression ratio technology and continuous variable valve timing technology, also using an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 2. Suspension: The Teana uses a MacPherson strut independent suspension at the front and a multi-link independent suspension with trapezoidal control arms at the rear.
Was this review help?
6
1
Share
More Forum Discussions

What is the fuel consumption of Nissan cars?

The official comprehensive fuel consumption of Nissan cars as per the Ministry of Industry and Information Technology is 5.6-6.3L/100km, which is quite economical. There are many factors that affect fuel consumption, and it is related to each individual's driving habits. Factors affecting fuel consumption: Generally, factors that affect fuel consumption include the condition of the car, driving habits, road conditions, vehicle weight, and load capacity. Ways to reduce fuel consumption: Car owners should try to maintain regular servicing to keep the engine in good condition and avoid carrying unnecessary items in the car. Use the correct gear while driving, release the accelerator in advance when approaching traffic lights, anticipate road conditions ahead to reduce unnecessary braking and sudden acceleration, and avoid traveling during peak traffic hours. These measures can help reduce fuel consumption.
6
5
Share

Does the BMW X5 hybrid need to be charged?

No additional charging is required. A hybrid vehicle is one that does not need an external charging device to charge the power battery. The motor in the non-plug-in hybrid powertrain can function as a generator. Typical operation: The electric motor drives the vehicle at low speeds, while the engine takes over at medium to high speeds. During engine operation, it can also drive the motor to generate electricity, charging the battery internally. Advantages and disadvantages of the BMW X5 hybrid: It can deliver a maximum power of 230kW and a peak torque of 450Nm, with a single tank of fuel capable of covering nearly 900 kilometers. In terms of storage, the charging cable is placed where the spare tire would normally be, making the trunk appear very tidy at first glance. However, this sacrifices the spare tire and 150L of volume, reducing the standard trunk capacity to only 650L.
19
4
Share

Where is the Civic's intercooler located?

The intercooler is generally located at the lower front of the vehicle. This component is used to cool the air. Hazards of not having an intercooler: Only turbocharged engines have intercoolers. Turbocharged engines compress air, which is equivalent to doing work on the air, thereby increasing the air temperature. If the intake air temperature is too high, it can lead to a decrease in oxygen content in the air, which affects engine performance. Excessively high intake air temperatures can also cause engine knocking. Efficiency of different intercoolers: Some turbocharged vehicles use water-cooled intercoolers, which have higher cooling efficiency; air-cooled intercoolers have very low cooling efficiency during traffic congestion.
10
0
Share

What causes the abnormal noise when starting a Mercedes-Benz E200?

Mercedes-Benz E200 startup abnormal noise may be caused by cold start noise or carbon canister solenoid valve operation noise. Below are detailed explanations of the causes and corresponding solutions: Cold start noise: Many people hear a "clicking" abnormal noise from the engine compartment during cold starts. In fact, this "clicking" noise occurs because the oil pump hasn't fully established oil pressure during cold start, resulting in insufficient lubrication for various components. Solution: Normally, this clicking noise will disappear after the engine runs for a while. Carbon canister solenoid valve operation noise: The function of the carbon canister solenoid valve is to open the electromagnetic valve between the carbon canister and the intake manifold after the engine starts, allowing the adsorbed gasoline vapor in the carbon canister to enter the cylinder along with air for combustion. This not only reduces emissions but also lowers fuel consumption. This component may also produce a clicking sound during operation. Solution: This is a normal working phenomenon and requires no treatment.
19
3
Share

Does the Audi A4 have a handbrake?

Audi A4 has a handbrake. Manual transmission usage method: Try to hold the handbrake button while pulling the handbrake. When pulling the handbrake, the button on the brake head will move back and forth and left to right, as there is a spring inside exerting force. Apply gentle force when pulling the handbrake. Do not suddenly yank the handbrake up, as this can damage the brake over time. The correct method is to pull the brake gently and smoothly, ensuring you can clearly hear the clicking sound of the brake engaging one notch at a time. Automatic transmission gear introduction: P stands for Park, used when parking; R stands for Reverse, the gear engaged when moving backward; N stands for Neutral, used for brief stops; D stands for Drive, where the transmission automatically shifts between gears 1 to 5 based on speed and throttle conditions; S stands for Sport mode; M stands for Manual mode in a manual-automatic transmission or simulated manual mode in a CVT transmission. L stands for Low gear.
3
4
Share

What type of engine oil should be used for the 2021 Volkswagen Bora?

Volkswagen Bora's dedicated engine oil model is SM or higher grade 5W-40 oil, or oil that meets the VW-502-00 standard. Engine oil for Bora's engine: The Bora's engine operates with high power, and its high compression ratio creates a high-temperature working environment inside the engine. High-viscosity oil is used to improve the engine's operating conditions, providing cooling and lubrication. Engine oil is a crucial factor affecting the engine's performance and lifespan. Selection of viscosity grade: Generally, in winter, 5W is sufficient for most regions, while some northern areas (such as Harbin) are better off using 0W for better cold-start performance to adapt to the driving environment temperature. For high-temperature viscosity, 30 or 40 is typically used.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.