Where is the cabin air filter located in the Mercedes-Benz E300?

1 Answers
DiIker
07/29/25 8:10pm
The Mercedes-Benz E300 has two cabin air filters. One is located inside the glove compartment in front of the passenger seat, and the other is positioned behind the right front shock absorber mount in the engine bay. Replacing them is relatively straightforward. The cabin air filter serves to purify the air entering the engine, acting as the engine's protective mask. It ensures that the air drawn into the engine is clean, which is beneficial for the engine's overall health. The Mercedes-Benz E300 is a mid-to-large-sized sedan produced by Beijing Benz. It is equipped with a 1.5T 184-horsepower L4 engine and a 9-speed automatic transmission, delivering a maximum power output of 135 kW and a peak torque of 280 Nm. The E300 features a turbocharged intake system, with a top speed of 230 km/h and a 0-100 km/h acceleration time of just 8.7 seconds. It utilizes a unibody construction.
Was this review help?
3
2
Share
More Forum Discussions

What is the reason for the loud noise in M gear?

m gear loud noise is caused by the vehicle speed being too slow while the gear is too low, resulting in excessively high engine RPM. There are three key points regarding gear selection in automatic transmission vehicles: 1. When encountering a red light: You can temporarily stop and hold the brake in D gear without harming the vehicle, as the torque converter in the transmission is equipped with a reaction wheel with a one-way clutch that amplifies torque from the engine crankshaft. It does not rotate at engine idle speed and only engages when the engine RPM increases; 2. During driving: The driver can freely switch between forward gears. Although the gear limits the highest achievable gear, as long as the gear matches the speed, free switching is possible; 3. When starting the vehicle: The brake pedal must be depressed to move the gearshift from P or N gear into a driving gear. Releasing the brake pedal allows the vehicle to move slowly. The purpose of pressing the brake in advance is to ensure the safety of both the driver and the vehicle.
11
4
Share

How Long Does It Take to Fully Charge a Car Battery While Driving?

Driving on the highway for more than an hour can fully charge the car battery. Below is relevant information about car batteries: 1. Calculation Method: The dark current of a car battery (the current loss when the car is not started) ranges between 10-30 milliamperes. Based on this, the maximum weekly loss of a car battery is approximately 5 amperes (24×0.03×7). After normal startup, the car engine provides a charging current of over 15 amperes to the battery. For the weekly battery loss, driving for about 20 minutes can compensate for this power. 2. Battery Maintenance: After turning off the car engine, try to turn off all onboard electrical equipment as much as possible. Most car batteries today are lead-acid batteries, which are not as delicate as lithium batteries. However, prolonged use of onboard power devices (with the car turned off) will undoubtedly cause the car battery to continuously discharge, leading to battery depletion.
4
3
Share

What is the actual fuel consumption of the Roewe RX5 MAX?

The actual fuel consumption of the Roewe RX5 MAX is 6.8-8.9L/100km. Below is a related introduction to the Roewe RX5 MAX: 1. Powertrain: The conventional powertrain models are equipped with 1.5T and 2.0T engines, while the plug-in hybrid models feature a 1.5T engine, all meeting the stringent China VI emission standards in one step. The 2.0T models are powered by SAIC's 'Blue Core' 400TGI high-performance engine, paired with a 6-speed wet dual-clutch transmission, delivering a maximum power of 170kW and a maximum torque of 370Nm. 2. Features: The vehicle comes with a 360-degree panoramic camera as standard, along with front side airbags, cruise control, and electric adjustment for the driver's seat. It also features the Internet Car Intelligent System 2.0.
18
5
Share

What does the automotive VCU mean?

The automotive VCU (Vehicle Control Unit) refers to the core electronic control unit responsible for vehicle control decision-making. It is typically equipped only in new energy vehicles, while traditional fuel-powered vehicles do not require this device. Below are relevant details about the automotive VCU: 1. Functional aspects: The VCU collects signals from components such as the accelerator pedal, gear position, and brake pedal to determine the driver's intentions. By monitoring the vehicle's status information, the VCU processes this data and issues operational control commands to the powertrain and battery systems. It also regulates the working mode of the vehicle's auxiliary electrical systems. Additionally, the VCU features comprehensive system fault diagnosis, protection, and storage functions. 2. Design principles: The VCU hardware adopts standardized core module circuits and specialized VCU circuit designs. The standardized core module circuits can be ported for use in MCUs (Motor Control Units) and BMS (Battery Management Systems), making the platform-based hardware highly portable and scalable.
15
4
Share

Where is the coolant in the Volkswagen Magotan?

Volkswagen Magotan coolant is located in a small pink liquid-filled reservoir on the left side of the engine compartment. Below is relevant information about automotive coolant: 1. Product Performance: Coolant consists of three components: water, antifreeze, and additives. Depending on the antifreeze component, it can be classified into alcohol-based, glycerol-based, ethylene glycol-based, and other types of coolants. 2. Winter Antifreeze Protection: To prevent the coolant from freezing and causing the radiator or engine block to crack after the car is parked in winter, the coolant's freezing point should be approximately 10°C lower than the region's minimum temperature to account for sudden weather changes.
15
0
Share

What to Do When Your Car Is Blocked and You Can't Contact the Owner?

If your car is blocked and you can't contact the owner, you can call 114. Then, 114 will connect you to a dedicated service hotline of the vehicle management department. Provide information such as the license plate number, model, color, and location, and the call will be forwarded to the owner. Below are some related introductions about car removal: 1. Traffic accident emergency number: Call 112. 122 is the public security traffic management authority's emergency number for handling traffic accident reports, dispatching officers to deal with various reports, requests for help, and also accepting public reports, complaints, and inquiries regarding traffic management and traffic police law enforcement. 2. One-click car removal: (1) In Alipay's "City Services," there is a "One-click Car Removal" feature. Enter the license plate number and location, then submit. The other car owner will receive a call reminder from the "Traffic Management 12123" system. (2) After the 12345 car removal service is launched, some car owners cooperate well, and the problem can be resolved within two to three minutes.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.