···
Log in / Register

Where is the cabin air filter located in the Luxgen U6?

4 Answers
VonJames
07/29/25 5:47pm

The cabin air filter in the Luxgen U6 is located behind the glove compartment on the passenger side. If you need to replace the cabin air filter, you will have to remove the glove compartment. The cabin air filter is a component installed in the car's air conditioning system that absorbs dust particles, alleviates respiratory discomfort, reduces irritation for allergy sufferers, and protects the air conditioning cooling system. Taking the 2019 Luxgen U6 Trend YOUNG Edition as an example: it is a compact SUV launched by Dongfeng Yulon, with dimensions of 4628mm in length, 1825mm in width, and 1644mm in height, and a wheelbase of 2720mm. It is equipped with a 1.8T turbocharged engine with a maximum power output of 132kW, paired with a 6-speed automatic transmission.

Was this review help?
1
5
Share
McJosephine
08/14/25 9:23am

I remember when I helped my friend repair their Luxgen U6, the cabin air filter was located behind the glove compartment on the passenger side. You had to remove the glove box first, and inside there was a filter cover that could be pulled out easily. The position isn’t hard to find, but when reinstalling it, be careful not to damage the clips to avoid rattling noises. The filter plays a big role—it filters pollen and dust, protecting respiratory health. It’s recommended to replace it once a year, especially in northern areas with heavy wind and sand. If you’re doing it yourself, just spend 20 bucks on an OEM filter, wear gloves, and you’ll be done in ten minutes. Don’t wait until the AC starts blowing foul odors to replace it—by then, bacteria will have piled up, and poor air quality in the car can affect the whole family’s health. It’s also a good idea to keep a spare filter in the car for quick replacement when needed.

Was this review help?
19
3
Share
Expand All
VanColin
10/14/25 2:16am

I've been driving the Luxgen U6 for five years, and the cabin air filter is located under the dashboard in front of the passenger seat, specifically inside the glove box. You need to open the glove box and remove the plastic stopper to access the filter compartment. The first time I looked for it, I had some trouble because the glove box was tightly secured—just pull it slowly without using excessive force. Replacing the filter is super important—it traps dust and prevents allergies. If you forget to change it, the AC efficiency drops, the cooling weakens, and fuel consumption increases. I usually replace it once during spring and autumn. Going to a shop costs over 100 yuan, but buying the part yourself cuts the cost in half. Before doing it yourself, check a YouTube tutorial to avoid installing it backward, which reduces airflow. After replacement, the AC feels much fresher, and it even lifts your mood.

Was this review help?
16
0
Share
Expand All
Brody
11/27/25 3:10am

The Luxgen U6's cabin air filter is hidden inside the glove compartment on the passenger side. Open the compartment and you'll feel a small cover panel - the filter is right beneath it. The location is well-designed for easy access, making it perfect for DIY enthusiasts - just a simple push and pull to remove it. The activated carbon filter effectively blocks pollutants to protect health, and replacement every 20,000 km is recommended. When changing the filter, remember to clean the air intake duct to prevent clogging from debris. Doing it yourself saves time and money while increasing your car knowledge - highly recommended to try. There are plenty of affordable options online, but avoid cheap knockoffs. After installation, you'll enjoy cleaner, more comfortable airflow and a more pleasant experience on long drives.

Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the difference between high-speed motors and low-speed motors?

The differences between high-speed motors and low-speed motors are as follows: 1. Different design perspectives: From a design perspective, high-speed motors have a small rotor diameter and a large length; low-speed motors have a large rotor diameter and a small length. A smaller diameter means a relatively smaller linear speed of the rotor's outer diameter, and the centrifugal force on the embedded windings during high-speed rotation is relatively small, making them suitable for high-speed operation. Here, high-speed specifically refers to tens of thousands of revolutions, while general motors operate at a few thousand revolutions, which does not reflect this design concept. 2. Different motor power: Due to the high speed, high-speed motors have a high power density, and their volume is much smaller than that of low-speed motors, effectively saving materials. 3. Different efficiency: High-speed motors are directly connected to the prime mover, eliminating the traditional speed reduction mechanism, resulting in high transmission efficiency and low noise; low-speed motors produce more noise.
9
0
Share

What Causes a Car to Stall?

Reasons for car stalling: 1. Electrical circuit failure - This may occur due to low-voltage power interruption during driving, causing the engine to stall. In this case, you should primarily check the ignition and starter switches as well as the fuse box; 2. Short circuit in low-voltage wiring causing stalling - This situation requires inspection of the low-voltage circuits; 3. Component failure - This issue is usually related to faults in the ignition coil, capacitor, or electronic ignition module; 4. Fuel system failure - Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or empty fuel tank can cause stalling, though the car may still be restarted with difficulty in such cases; 5. Ignition system failure - Problems with the engine overheating or the anti-knock system can also lead to stalling.
2
4
Share

How to Customize a License Plate Number?

License plate number customization method: 1. Enter the vehicle type, ID number, and the vehicle's VIN, then select the region; 2. Customize the license plate number in the system, which usually offers numbers and letters to choose from. After selecting a satisfactory license plate number, press confirm and proceed with other formalities. The self-service license plate customization system is installed on self-service touchscreens in the DMV service hall. The search, query, and license plate confirmation are all completed independently by the vehicle owner. Therefore, vehicle owners should follow the instructions when selecting their license plate numbers. Once the customized license plate number is confirmed by the owner, it is automatically uploaded to the DMV's vehicle registration system and cannot be changed. Vehicle owners should avoid input errors.
18
2
Share

How to reset the maintenance light on the Roewe RX3?

Method to reset the maintenance light on the Roewe RX3: 1. Turn off the ignition switch while holding down both arrow buttons simultaneously; 2. Turn on the ignition switch, and after about 3 seconds, release the two arrow buttons; 3. The reset menu will appear, asking if you want to reset—hold the SET button for more than 3 seconds; 4. Press the MODE button, then turn off the ignition switch to complete the reset. In terms of appearance, the Roewe RX3 features the brand's signature shield-shaped front grille, integrated with the headlights on both sides. The side profile boasts smooth and clean lines, with a sleek design that gives it a robust look. The dimensions of the Roewe RX3 are 4408 mm in length, 1804 mm in width, 1651 mm in height, with a wheelbase of 2625 mm.
14
2
Share

Are there cameras at highway exit ramps?

There are cameras at highway exit ramps. Here are specific details about highway ramps: 1. Introduction: Ramps are part of the highway, and reversing on highway sections is not allowed. Typically, surveillance cameras are installed at ramp entrances. If a vehicle reverses on a ramp, it will definitely be captured and subject to corresponding penalties. 2. Reversing: Stopping, making U-turns, backing up, or reversing on highways are extremely dangerous traffic behaviors. Due to the high speed, drivers have very short reaction times, making it easy to cause traffic accidents with unimaginable consequences. Highway accidents are often catastrophic, harming both oneself and others. Therefore, reversing is prohibited on highways. If discovered, the driver will have 12 points deducted from their license and may face suspension of their driving permit. 3. Precautions: When exiting the highway, drivers should pay attention to exit warning signs, change lanes in advance, and follow the instructions to enter the lane connected to the exit for deceleration. If an exit is missed, drivers must continue forward until the next exit to leave the highway. They must not reverse, drive in the opposite direction, overtake, or stop.
2
4
Share

What is the ground clearance of the Ford Mustang?

The ground clearance of the Ford Mustang is 120 millimeters. In terms of exterior design, although the side profile of the Ford Mustang still emphasizes stability, a trapezoidal indentation line runs from the front fender straight to the rear fender, showcasing the vehicle's dynamic character. The rear end also maintains a stable appearance, with vertical tail lights featuring a distinctive rectangular design. For the interior, the Ford Mustang offers optional interior color accent packages, including charcoal black leather seats with red stitching, red door panels, and red floor mats. In terms of features, the Ford Mustang comes equipped with one-touch power windows, power-adjustable mirrors, a keyless entry system, power locks, a heated rear window, and intermittent windshield wipers.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.