Where is the cabin air filter located in the Lingzhi M5?

1 Answers
LeMila
07/29/25 12:23pm
The cabin air filter of the Dongfeng Fengxing Lingzhi M5 is located inside the glove compartment on the passenger side. Find the plastic cover behind the glove compartment and open it to access the cabin air filter. The cabin air filter of the Dongfeng Fengxing Lingzhi M5 should be replaced every 20,000 kilometers. If driving in harsh environments, it is recommended to shorten the replacement interval. The cabin air filter consists of two components for filtration effectiveness, and both must be replaced together during maintenance. Function of the cabin air filter: It filters impurities from the air entering the vehicle cabin, including fine particles, pollen, bacteria, industrial exhaust, and dust, improving air cleanliness. This prevents such contaminants from damaging the air conditioning system and provides a clean air environment for passengers. Maintenance of the cabin air filter: If the filter is dirty, clean it by blowing compressed air from the reverse side. Hold the air gun about 5 cm away from the filter and blow at 500 kPa pressure for approximately 2 minutes. The cabin air filter easily accumulates dust, so use compressed air to remove loose particles. Never wash it with water, as this may render it unusable. Poor maintenance of the cabin air filter can lead to excessive dust and dirt accumulation on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. This may result in reduced cooling and heating efficiency, increased power consumption, noise, and a shortened lifespan of the air conditioning system. Impact of not replacing the cabin air filter on drivers: Long-term use without replacement can cause impurities on the filter to mold, producing bacteria and odors, which may harm the health of drivers and passengers and even induce respiratory diseases. Impact of not replacing the cabin air filter on the engine: Severe blockage of the air filter increases intake resistance, reducing engine power and worsening engine performance. This leads to higher fuel consumption and accelerates engine wear and carbon buildup. Precautions for replacing the cabin air filter: Purchase cabin air filters from reputable manufacturers, carefully checking their appearance and dimensions for comparison. Always replace the cabin air filter with the engine turned off. When loosening screws or removing clips, apply appropriate force. During installation, ensure the correct orientation of the filter to avoid reverse installation. After installation, verify that the filter is properly seated, with the filtration surface covering the entire air duct and fitting snugly to prevent filtration failure. Precautions for using the car air conditioning system: Do not turn on the heating immediately when warming up the car in the morning. Wait until the engine coolant temperature rises before activating the air conditioning. Avoid setting the air conditioning temperature too high, as prolonged exposure to excessive heat may cause drowsiness and affect driving. Also, avoid directing warm air straight at the face. If windows fog up after turning on the heating, increase the fan speed and let it blow for a while to eliminate the fog and prevent recurrence. During long-distance driving, ventilate the cabin periodically, as prolonged lack of air circulation may cause breathing discomfort for passengers. Turn off the air conditioning before parking and switch to external circulation with natural air to clean the air conditioning ducts and prevent bacterial growth.
Was this review help?
20
0
Share
More Forum Discussions

Which country is the Infiniti sedan from?

Infiniti sedans are produced by Japan's Nissan company, but their headquarters are in the United States. Infiniti sedans belong to the high-end vehicle category. The flagship model of Infiniti is the FX35, with body dimensions of 4820 mm in length, 1925 mm in width, and 1670 mm in height, and a wheelbase of 2885 mm. The car is equipped with features such as dual-zone automatic climate control, an in-car navigation system, a rear-seat DVD entertainment system, an 11-speaker Bose audio system, a 10-way power-adjustable driver's seat with memory function, heated front seats, and a rearview camera system. The FX35 not only has a camera at the rear of the vehicle but also features two side-view cameras at the bottom of both side mirrors to assist the driver with parking and other maneuvers, making it a very practical and convenient feature.
6
1
Share

How often should a passenger car be inspected?

A passenger car should be inspected once every 2 years within the first 6 years; once every year after exceeding 6 years; and once every 6 months after exceeding 15 years. The contents of the annual inspection include: 1. Whether the vehicle has a user manual and a certificate of conformity, and whether the factory sample marks on the vehicle body are complete; 2. Measuring the internal and external contour dimensions, wheelbase, and axle base of the motor vehicle, with specific measurement items including vehicle length, width, height, cargo compartment side height and area, wheelbase, and axle base; 3. Conducting inspections item by item according to technical inspection standards. After passing, fill out the motor vehicle initial inspection variation registration form, and record the unladen weight, load capacity, number of passengers, and number of occupants in the cab as specified by the manufacturer.
6
2
Share

What is the correct way to use the AC button?

The correct way to use the AC button is: the AC button in the car can only be turned on when the air conditioning is in cooling mode. AC stands for air conditioning. After turning on the AC button in the car, the air conditioning compressor will achieve cooling through different rotation modes. Since the heating system of the air conditioning is supplied by the heat generated by the engine, the AC button only has the function of cooling. When using the air conditioning on hot days, remember to turn on the AC button in the car; otherwise, the cooling function will not work. After the air conditioning compressor starts, the engine load will increase, the car's power may slightly decrease, and fuel consumption will rise because the engine supplies power to the compressor.
4
2
Share

How to Open the Hood of an Audi A6?

Audi A6's hood opening method is as follows: Locate the release handle under the dashboard near the driver's left calf, pulling towards the front of the car. After pulling, the hood will pop up approximately 1cm. Then, lift the hood with one hand while using the other hand to reach above the grille to find and operate the hood latch. The locations are generally similar across different models, but the direction of operation may vary. The Audi A6 is a luxury vehicle produced by Audi, available in both sedan and station wagon versions. The dimensions of the Audi A6 are 5012mm in length, 1855mm in width, and 1485mm in height, with a wheelbase of 2945mm. The interior of the Audi A6 mainly consists of a retractable display and a dual-zone air conditioning control area. Below the central CD player, from left to right, are the auto start-stop system, parking assist, passenger airbag deactivation, rear window sunshade, ESP off button, and automatic parking system.
3
3
Share

Is Cleaning Spark Plugs Useful?

Cleaning spark plugs is not useful. When spark plugs reach the end of their lifespan, their internal components age, leading to poor acceleration and increased fuel consumption, which cleaning cannot resolve. The gap between the spark plug electrodes significantly affects their performance. If the gap is too small, the spark will be weak and prone to carbon buildup and leakage. If the gap is too large, the required breakdown voltage increases, making the engine harder to start and more likely to misfire at high speeds. Therefore, the spark plug gap should be properly adjusted. The standard for spark plugs typically uses the heat value to characterize their thermal properties. The heat value indicates the balance between heat absorption and dissipation in the spark plug insulator's skirt. A higher heat value means better heat absorption and dissipation balance. Thus, hot-type spark plugs have a low heat value, while cold-type spark plugs have a high heat value. Generally, high-power, high-compression engines use cold-type spark plugs with high heat values, whereas low-power, low-compression engines use hot-type spark plugs with low heat values.
3
2
Share

What does VVL engine mean?

VVL engine stands for Variable Valve Lift, which is a system that changes the opening degree of the valves. While variable valve timing systems adjust the timing of valve opening and closing, variable valve lift alters the extent of valve opening. In traditional gasoline engines, the valve lift is fixed and unchangeable, meaning the camshaft has only one cam profile. This limitation prevents the engine from achieving optimal performance in both high-speed and low-speed ranges. The valve lift and cam profile in conventional gasoline engines are designed as a compromise for balanced performance across all operating conditions. The adoption of VVL technology allows the engine to achieve the required valve lift in both high-speed and low-speed ranges, thereby improving high-speed power and low-speed torque.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.