Where is the cabin air filter located in the LaCrosse?

1 Answers
Theo
07/29/25 6:37pm
LaCrosse's cabin air filter is located inside the glove compartment on the passenger side. The steps to replace the cabin air filter are as follows: 1. Insert a screwdriver into the gap on the right side of the glove compartment plastic panel and gently pry it up; 2. Remove the internal screws with the screwdriver; 3. Press the plastic clips on the panel and pull it outward; 4. Unclip the three plastic fasteners above the cabin air filter. The LaCrosse is a sedan produced by Shanghai GM. Its engine features dual VVT, electronic throttle, individual ignition coils per cylinder, two additional balance shafts inside the engine block, and chain-driven camshafts, significantly reducing operational vibrations and maintenance costs. The LaCrosse measures 5031mm in length, 1853mm in width, and 1458mm in height, with a wheelbase of 2807mm.
Was this review help?
19
2
Share
More Forum Discussions

How Long Can a Bulging Tire Last?

Tires with bulges should not continue to be used, as further driving may lead to tire blowouts, endangering driving safety. The steps for replacing a tire are: 1. Park the vehicle in a safe and level area; 2. Place the jack under the vehicle frame near the tire to be replaced and lift the vehicle to a certain height; 3. Use a wrench to loosen the nuts and remove the tire that needs to be replaced; 4. Install the new tire; 5. Tighten the nuts with a wrench; 6. Lower the jack. Methods for tire maintenance include: 1. Regularly clean out stones stuck in the tire treads; 2. Minimize exposure of tires to direct sunlight; 3. Regularly check tire pressure; 4. Pay attention to suspension maintenance; 5. Periodically inspect front wheel alignment; 6. Be mindful of driving habits.
10
0
Share

Which country is the Lincoln Navigator from?

The Lincoln Navigator is from the United States, as Lincoln is an American automobile manufacturing company. Taking the 2020 Lincoln Navigator as an example, its body dimensions are: length 5355mm, width 2073mm, height 1937mm, wheelbase 3112mm, fuel tank capacity 89.3l, and curb weight 2820kg. The 2020 Lincoln Navigator features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 3.5L twin-turbocharged engine, delivering a maximum horsepower of 387ps, maximum power of 285kw, and maximum torque of 680nm, paired with a 10-speed automatic transmission.
19
3
Share

What are the headlight specifications for the Elantra?

The headlight specifications for the Elantra are H7 and H11. The headlights are divided into high beam and low beam, with different models for each. The low beam uses H7 bulbs, while the high beam uses H11 bulbs. Taking the 2020 Elantra as an example, it is a compact car with the following dimensions: length 4610mm, width 1800mm, height 1450mm, a wheelbase of 2700mm, and a curb weight of 1319kg. The 2020 Elantra is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 130PS, a maximum torque of 211Nm, and a maximum power of 95.6kW. It is paired with a 7-speed dual-clutch transmission.
20
1
Share

What brand is the BMW car audio system?

BMW car audio systems come in brands such as American Bose, Harman Kardon, and Danish BO audio. Among them, Danish BO is known for its exceptionally beautiful audio equipment, manufactured in Denmark. Car audio (autoaudio) is an audio playback device installed to alleviate the monotony of travel for drivers and passengers. BMW is a German luxury car brand headquartered in Munich, Bavaria, Germany. BMW's vehicle lineup includes the i, X, Z, and pure numeric series with models like 1, 2, 3, 4, 5, 6, 7, 8, as well as the M series, which is an enhanced version based on these models.
4
5
Share

What are the causes and solutions for oil burning in BMW X1?

Possible causes of oil burning are as follows: 1. Piston: Piston ring sticking, sealing in the combustion chamber. 2. Maintenance: Long-term lack of maintenance, excessive sludge accumulation, oil passages clogged. 3. Corrosion: Valve corrosion and aging. 4. Malfunction: Ventilation exhaust system failure. Solutions are as follows: 1. Piston: Regularly replace and inspect pistons. 2. Maintenance: Take the car to a 4S shop for regular maintenance. Car maintenance items include replacing engine oil and oil filter, air filter, fuel filter, transmission fluid, and tire maintenance.
15
4
Share

Do brake pads need to be replaced at 60,000 kilometers?

Brake pads need to be replaced at 60,000 kilometers. The method for replacing brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install new brake pads and tighten the guide bolts. The working principle of brake pads is to use the friction between the brake pads and the brake drum, as well as between the tires and the ground, to convert the kinetic energy of the moving vehicle into heat energy after friction, thereby stopping the vehicle. The materials of brake pads are: 1. Asbestos, cellulose, sintered glass; 2. Carbon fiber friction material; 3. Powder metallurgy friction material; 4. Semi-metallic friction material.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.