Where is the cabin air filter located in the LaCrosse?

2 Answers
BeauLynn
07/24/25 6:04pm
Buick LaCrosse's cabin air filter is located inside the glove compartment on the passenger side. The specific replacement procedure is as follows: 1. Insert a screwdriver into the gap on the right side of the glove compartment plastic panel: gently pry it open. 2. After prying up the plastic panel: use the screwdriver to remove the screws inside. 3. After removing the screws: gently press the plastic clips on the panel while pulling it outward. 4. Once the panel is removed: you will see the LaCrosse's cabin air filter. When removing the filter, you must release the 3 plastic clips above it, otherwise it cannot be taken out. 5. After installing the new cabin air filter: reassemble the plastic panel by reversing the removal sequence. The entire Buick LaCrosse cabin air filter replacement process is now complete.
Was this review help?
8
0
Share
Allen
08/11/25 10:00am
The cabin air filter in my LaCrosse is located behind the glove compartment on the passenger side. I was a bit nervous when I replaced it last time. There are two clips under the glove box—just gently pry them open and lower the entire glove box to reveal a small plastic cover. Unscrew it to remove the old filter, which was completely covered in dust. There are video tutorials online, and it’s quite simple. I recommend replacing it every six months to avoid odors. In northern areas with heavy wind and sand, a clogged filter can reduce airflow and cause a musty smell in the car. All you need is a Phillips screwdriver. Beginners shouldn’t worry about damaging anything—after replacing it, breathing feels much smoother, and the air purification effect is noticeably better.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What is the 0-100 km/h acceleration time of the BMW 125i?

The 0-100 km/h acceleration time of the BMW 125i is 6.2 seconds. Introduction to 0-100 km/h acceleration: 0-100 km/h acceleration refers to the time it takes for a vehicle to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, 1.6L compact cars achieve 0-100 km/h acceleration times between 11 to 13 seconds, 2.0T mid-size sedans between 7 to 8 seconds, while supercars mostly have acceleration times under 3.8 seconds. Driving modes for 0-100 km/h acceleration: There are mainly two driving modes for 0-100 km/h acceleration: manual transmission 0-100 km/h acceleration and automatic transmission 0-100 km/h acceleration.
18
4
Share

What is the fuel tank capacity of the 2020 Tiggo 7?

2020 Tiggo 7 has a 51-liter fuel tank. Fuel Tank Capacity: The fuel tank capacity (L) refers to the size of the fuel tank, measuring a vehicle's ability to hold fuel. The fuel tank capacity determines the driving range. For two cars with identical engines, the one with a larger fuel tank can travel farther. The size of the fuel tank is directly related to the vehicle's fuel consumption, and generally, a full tank can cover over 500 kilometers. Notes on Fuel Tank: The actual capacity of the fuel tank is greater than the nominal capacity. According to fuel safety regulations, the national standard stipulates that the nominal capacity of a vehicle's fuel tank is 95% of the rated capacity. Therefore, when filling up, the tank can hold about 10% more fuel than the nominal capacity.
19
3
Share

What are the causes of abnormal noise in the front wheel of a motorcycle?

Motorcycle front wheel abnormal noise is caused by: bearing aging, incomplete separation of brake pads, and friction between the dust seal and the shaft sleeve. A motorcycle is a two- or three-wheeled vehicle driven by a gasoline engine, steered by handlebars for front-wheel turning. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. A motorcycle consists of five main parts: the engine, transmission system, running gear, braking system, and electrical instrumentation equipment. The transmission system of a motorcycle includes primary reduction, clutch, gearbox, and secondary reduction.
2
1
Share

What Transmission Does the Spirior Use?

The Spirior is equipped with a CVT continuously variable transmission and an 8-speed dual-clutch transmission. The body dimensions of the Spirior are 4587mm in length, 1825mm in width, and 1490mm in height, with a wheelbase of 2687mm. The Spirior offers three powertrain variants: a combination of a 2.0L engine with an electric motor, a standalone 2.0L engine, and a 2.4L engine. The hybrid version's engine delivers a maximum power of 146 horsepower, while the electric motor provides up to 184 horsepower. The 2.0L engine produces a maximum power of 114 kW and a maximum torque of 190 N·m, paired with a CVT continuously variable transmission. The 2.4L engine generates a maximum power of 153 kW and a maximum torque of 247 N·m, mated to an 8-speed dual-clutch transmission.
10
4
Share

What are the methods for judging the distance of a car seen in the rearview mirror?

You can judge the distance of a car seen in the rearview mirror by the size of the rear vehicle in the mirror. The following is an introduction to the rearview mirror: 1. Introduction: The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, side, and lower parts of the car while sitting in the driver's seat. For the convenience of the driver's operation, to prevent traffic safety accidents, and to ensure personal safety, all countries have stipulated that rearview mirrors must be installed on cars, and all rearview mirrors must be adjustable in direction. 2. Installation position: (1) Interior rearview mirror: The interior rearview mirror is designed to confirm the rear view without significantly changing the forward line of sight while driving. (2) Exterior rearview mirror: Passenger cars generally install exterior rearview mirrors on the doors. In Japan, some vehicles also have them installed on the fenders.
7
3
Share

How much engine oil should be added to a Mercedes-Benz S350?

Mercedes-Benz S350 requires 8.5 liters of engine oil. Methods for selecting engine oil: When choosing engine oil, three main factors should be considered: API grade, viscosity grade, and base oil quality. For motorcycles like the Xisha, an API grade of SF or above is sufficient. The viscosity grade can be 10W-30 or 10W-40, and the base oil quality can be mineral oil, semi-synthetic, or fully synthetic oil, depending on the situation. The specific oil change model can be referred to in the vehicle's user manual. Methods for checking engine oil level: The engine oil level can be checked using the dipstick in the oil pan. When the engine is cold, pull out the dipstick, wipe it clean, reinsert it, and then pull it out again. As long as the oil level is between the MIN and MAX marks, it is acceptable.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.