Where is the cabin air filter located in the JAC Tongyue?

1 Answers
JayceRose
07/29/25 10:19pm
The cabin air filter in the JAC Tongyue is located on the passenger side. Open the glove compartment, remove the fixed shaft beneath it, and release the plastic stopper on one side. You will then see a vertical plastic pin - removing it allows access to two cabin air filters. The cabin air filter is a component installed in the vehicle's air conditioning system that absorbs dust particles, alleviates respiratory discomfort, reduces irritation for allergy sufferers, and protects the AC cooling system. The JAC Tongyue is a model under the JAC brand with body dimensions of 4155mm (length) × 1650mm (width) × 1465mm (height) and a wheelbase of 2410mm. Externally, the JAC Tongyue features a compact yet full-bodied design, offering more spacious interior room compared to other vehicles in its class.
Was this review help?
10
4
Share
More Forum Discussions

Where is the drainage hole of the Fit door?

This model's door drainage holes are located on the inner side skirts of both car doors, usually near the rubber strips, making them relatively hard to find. The door drainage holes allow water inside the door to drain out during rain, preventing corrosion of the car door. More relevant information is as follows: 1. Introduction: The Honda Fit is designed to meet the personalized needs of car users and is highly favored by many young consumers. The car's exterior design is inspired by the aerodynamic components of racing cars, giving the new Fit a more stylish visual effect compared to the older model. 2. Configuration: The interior space of the new Fit has been significantly increased, becoming a major selling point. Equipped with a 1.3-liter engine, the maximum horsepower reaches 73kw, providing a solid foundation for the Fit's dynamic performance. Additionally, the Fit employs comprehensive collision safety technology, ensuring excellent self-protection performance during collisions.
13
4
Share

Is it worth buying a used Chrysler Sebring?

It is worth buying a used Chrysler Sebring. As the second Chrysler model introduced and domestically produced after the establishment of Beijing Benz-DaimlerChrysler, the Sebring inherits the brand essence that Chrysler has cultivated over more than 80 years, while also being improved to meet the demands of the Chinese market. The 2.0L engine variant was specifically introduced for the Chinese market. It can be said to be a classic masterpiece that combines the best of various car cultures, offering both the safety and grandeur of American cars and the fuel efficiency of Japanese cars. More relevant details are as follows: 1. Design: The design inspiration for the Chrysler Sebring comes from the Art Deco concept, which represents avant-garde design language. The application of design elements, along with the largest 17-inch full aluminum alloy wheels in its class (the 2.7L model even features oversized 18-inch wheels), makes the Sebring stand out in the mid-to-high-end sedan market in China, which is dominated by Japanese and European models. 2. Safety System: The Chrysler Sebring provides consumers with comprehensive protection across five dimensions: collision safety, active safety, passive safety, property safety, and health safety. This car, which has earned a five-star safety rating in the U.S. NHTSA safety crash tests, is equipped not only with standard ESP, ABS, EBD, TCS, BAS, six airbags, and other active and passive safety devices but also features a unique intelligent tire pressure monitoring system unmatched in its class. The use of TPO raw materials in the interior space ensures environmental friendliness and health, offering drivers complete physical and mental care.
18
0
Share

What causes white foam in antifreeze?

White foam in antifreeze is a normal phenomenon and there is no need to worry. Below is relevant information: 1. The difference between antifreeze and tap water: The liquid added to the radiator is specifically designed for automotive use. The boiling point of antifreeze differs from that of ordinary water. While ordinary water boils at 100 degrees Celsius, antifreeze can reach a boiling point of 110 degrees or higher. 2. The function of antifreeze: The liquid in the car radiator is antifreeze, which has the functions of preventing freezing, rust, and boiling. However, the boiling point of the coolant is not the same for every car, as vehicles choose their coolant based on the local minimum temperature.
3
5
Share

Can the Audi A6L be started remotely?

Audi A6L can be started remotely. The following is a related introduction about the Audi A6L: 1. Introduction: The Audi A6L is the first Audi model to enter the Chinese market, with its predecessor being the third-generation Audi 100, codenamed C3, introduced in 1988. The Audi A6L is a vehicle series developed by FAW-Volkswagen Audi based on the new German A6 and is the successor to the A6. In June 2012, the new-generation Audi A6L was launched, equipped with 35-TFSI power, and its appearance somewhat resembles the new version of the A4L. 2. Design: The new Audi A6L adopts a five-link front suspension design, balancing the necessary rigid connection for sportiness and comfort with low static stiffness. Among them, the hydraulic form of the frame vibration damping support can significantly improve the vehicle's driving comfort and effectively reduce the impact and jerkiness when passing over speed bumps and uneven road surfaces, thereby reducing the impact on the lumbar spine.
10
4
Share

What is the fuel consumption of the Exeed TXL?

The comprehensive fuel consumption of the Exeed TXL is 6.9-7.6L/100km. There are currently 3 models of the Exeed TXL on sale. The comprehensive fuel consumption of the two-wheel-drive Super Power 3 is 6.9L/100km. The four-wheel-drive Super Power 2 and four-wheel-drive Super Power 1 have a comprehensive fuel consumption of 7.6L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.65-9.95L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly flooring the accelerator, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking during operation, making it more fuel-efficient. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or inspection: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the mileage. Close the windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the more resistance the car encounters, requiring more power and thus increasing fuel consumption.
12
2
Share

Where are the three major components of the Southeast DX5 produced?

Southeast DX5's three major components: the engine is produced by Shenyang Aerospace Mitsubishi; the transmission comes from Japan's Aisin; and the chassis is sourced from Hyundai of South Korea. Below is relevant information about the Southeast DX5: 1. Powertrain: The Southeast DX5 is equipped with Mitsubishi's all-aluminum 4A91 MIVEC engine and the 4A91T MIVEC turbocharged engine, delivering a maximum power of 115/5600 kW/rpm and a maximum torque of 225/2000-4000 N·m/rpm. It is paired with Belgium's PUNCH third-generation 8-speed CVT automatic transmission, Aisin's 6-speed manual transmission, and a 5-speed manual transmission. 2. Dimensions: The Southeast DX5 is not very large in size, with a length of only 4406mm, a width of 1840mm, a height of 1654mm, and a wheelbase of 2615mm. The height can reach 1680mm when equipped with a roof rack.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.