Where is the cabin air filter located in the JAC T6 GT?

1 Answers
OJuliette
07/29/25 6:19pm
The cabin air filter in the JAC T6 GT is located behind the glove compartment on the passenger side. To replace the cabin air filter, you need to first remove the glove compartment. The cabin air filter is an important component of the car's air conditioning system and needs to be replaced regularly. If not replaced for a long time, it can affect the performance of the air conditioning system and the health of the passengers. The working principle of a car air conditioning system is as follows: 1. When heating, the high-temperature coolant from the engine flows through the heater core, and the air blown by the blower also passes through the heater core, allowing warm air to be blown out from the air vents. 2. When cooling, the compressor clutch engages, causing the engine to drive the compressor. The compressor then continuously compresses the refrigerant and delivers it to the evaporator. 3. The refrigerant expands in volume inside the evaporator, absorbing heat in the process. The refrigerant cools the evaporator, which in turn cools the air blown by the blower, allowing cold air to be blown out from the air vents.
Was this review help?
13
1
Share
More Forum Discussions

What car is the X-Trail from Dongfeng Nissan?

X-TRAIL is a compact SUV under the Nissan brand, with the Chinese name "Qijun". Here is an introduction to the Qijun: 1. The "X" represents that the Qijun is a vehicle challenging 4x4, while "TRAIL" means rugged roads. The English name of Qijun symbolizes that it is an SUV capable of driving in various road conditions. Currently, the main competitors of X-TRAIL in the market include the Toyota RAV4 and CR-V. 2. The latest model of Qijun was launched in August 2018, with a manufacturer's suggested retail price ranging from 188,800 to 271,300 yuan. The Qijun comes in both 5-door 5-seat and 5-door 7-seat configurations, equipped with a 2.0L engine and a 2.5L engine, delivering 154 horsepower and 186 horsepower respectively. It is paired with a CVT transmission, indicating that the Qijun is more inclined towards urban road driving. 3. The Qijun's drive form is front-engine front-wheel drive, with an available four-wheel-drive version. Different from traditional off-road vehicles, even though the Qijun has a four-wheel-drive system, it lacks a transfer case, low-range gears, and still uses a CVT transmission, which prevents it from being used as a true off-road vehicle. The Qijun only has better passing ability than ordinary sedans. 4. As an SUV, the Qijun offers excellent interior space, ranking first in its class.
16
1
Share

What are the differences between the 2018 and 2019 Magotan models?

The differences between the 2018 and 2019 Magotan models are as follows: 1. Configuration: The 2019 model adds LED headlights compared to the 2018 model, replaces the rear cigarette lighter with a USB port, and changes from single-side exhaust to dual hidden exhaust. 2. Dimensions: The 2019 Volkswagen Magotan measures 4866 mm in length, 1832 mm in width, and 1464 mm in height, with a wheelbase of 2871 mm; the 2018 Magotan measures 4866/1832/1464 mm in length/width/height, with a wheelbase of 2871 mm. 3. Engine options: The 2019 Magotan offers three engine options: the 280TSI model is equipped with the EA211 series 1.4T engine; the 330TSI model is equipped with the EA888 2.0T low-power version engine; the 380TSI model is equipped with the EA888 2.0T high-power version engine. The 2018 Magotan offers three engine options: 1.4T 280TSI, 1.8T 330TSI, and 2.0T 380TSI.
12
1
Share

How to Fix Severe Engine Oil Burning?

Engine oil burning severely can be repaired by: 1. Replacing the engine oil with the correct type for the new engine model; 2. Replacing the new valve stem seals; 3. Replacing the new oil seals between the turbocharger and the intake pipe. Once the problem is identified, we can repair or replace the corresponding damaged parts. If the engine still burns oil severely after these operations, we need to send the vehicle to a 4S shop for a comprehensive inspection. During daily use of the vehicle, we should pay attention to proper engine maintenance, such as using high-quality engine oil, qualified coolant, regularly cleaning the radiator scale, removing carbon deposits from the car, replacing the three filters on time, and maintaining a reasonable engine speed.
7
0
Share

What is the normal water temperature for a Porsche 911?

Porsche 911 water temperature is generally normal around 90 degrees Celsius. Below is an introduction regarding the water temperature of a Porsche 911: 1. The Porsche 911 dashboard uses physical or virtual dial pointers for display: A few vehicles do not have a dashboard and only show a warning indicator when the temperature is too high. 2. The Porsche 911 water temperature gauge ranges from 0-130°C, with the normal temperature being the central 90°C: After starting the vehicle, the water temperature rises quickly. Once the pointer reaches the central position, the water temperature stops rising. Generally, it is optimal to start driving when the temperature reaches the middle position. Different engines have different normal water temperature ranges, with 80°C to 95°C being normal. The engine defaults 80°C as the closed-loop control point for the oxygen sensor, and 95°C is the highest control point for the cooling system. 3. If the engine water temperature is too low or too high, it indicates a fault in the cooling system or the engine: The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to dissipate the heat, and then returns to the water jacket for circulation, achieving temperature regulation.
14
3
Share

Does the New Excelle have a rear anti-collision beam?

Both the front and rear of the Buick New Excelle are equipped with anti-collision steel beams. Additional information about the Excelle's anti-collision beams is as follows: 1. The front anti-collision beam differs from those of competing models, with an effective protection area reaching 90%. It covers most of the front of the vehicle and is made of aluminum alloy, a material rarely seen in vehicles of the same class. This ensures lightweight construction while maintaining sufficient strength, with a yield strength of 300MPa, surpassing the performance of standard structural anti-collision beams. It features a closed structure. 2. The rear anti-collision beam covers almost the entire rear of the vehicle. It is made of DP1000 ultra-high-strength steel with a yield strength of 645MPa and a thickness of 1.2mm. It employs a hat-shaped structure and is designed with a collapse guide groove. It is fixed to the longitudinal beams with screws, effectively protecting the vehicle and its occupants in the event of a rear-end collision.
11
3
Share

What are the main types of engine abnormal noises?

The main types of engine abnormal noises include: 1. Hydraulic tappet noise; 2. Timing belt noise or timing chain noise; 3. Valve spring noise; 4. Intake timing automatic control mechanism noise; 5. Valve noise caused by excessive carbon deposits during high-speed engine operation; 6. Noise caused by loose fasteners; 7. Noise caused by excessive clearance between components. During regular vehicle use, we should pay attention to proper engine maintenance, such as using high-quality engine oil, qualified coolant, regularly cleaning radiator scale, periodically removing carbon deposits from the vehicle, timely replacement of the three filters, and maintaining reasonable engine speed.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.