Where is the cabin air filter located in the Honda CR-V?

1 Answers
LeKai
07/29/25 10:41pm
The cabin air filter in the Honda CR-V is located behind the glove compartment. To access it, open the glove box, press down on the hook at the lower right corner with your hand, gently squeeze inward from the outside to release it, then press the locking tabs on both sides with both hands to remove the protective cover, allowing you to take out the old filter. The cabin air filter is a component installed in the vehicle's air conditioning system that absorbs dust particles, reduces respiratory discomfort, minimizes irritation for allergy sufferers, and protects the air conditioning cooling system. The Honda CR-V is an urban classic SUV model produced by Dongfeng Honda, featuring a sporty and stylish design exterior and equipped with Michelin Latitude series SUV tires, delivering excellent handling performance.
Was this review help?
4
3
Share
More Forum Discussions

What does the ABS light on the dashboard indicate?

The ABS light on the dashboard indicates a malfunction in the vehicle's Anti-lock Braking System. The working principle of ABS is: during emergency braking, it relies on highly sensitive wheel speed sensors installed on each wheel to detect wheel lock-up. The computer then controls the pressure regulator to release pressure from the wheel's brake cylinder, preventing wheel lock-up. The functions of the ABS system are: 1. To prevent loss of vehicle control, increase braking distance, and improve vehicle safety; 2. To enhance the overall braking performance of the vehicle; 3. To prevent wheel lock-up during braking; 4. To ensure the driver can control the direction during braking and prevent rear axle skidding.
3
2
Share

What car has a cross and a snake as its logo?

A cross and a snake are the logo of Alfa Romeo cars. Its models include: Giulia, Giulia Quadrifoglio, Stelvio, Stelvio Quadrifoglio, Giulias, etc. Taking the 2020 Giulia as an example, its body dimensions are: length 4643mm, width 1860mm, height 1438mm, wheelbase 2820mm, and fuel tank capacity 58L. The 2020 Giulia has a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T naturally aspirated engine, with a maximum horsepower of 280PS, maximum power of 206kW, and maximum torque of 400Nm, matched with an 8-speed automatic transmission.
14
1
Share

What is the installation method for the timing belt of the Qashqai?

The installation method for the timing belt of the Qashqai is as follows: 1. Align the mark on the camshaft timing gear with the mark on the valve cover, and align the mark on the crankshaft timing gear with the mark on the front cover; 2. Install the timing belt in sequence onto the crankshaft timing gear, water pump pulley, idler pulley, camshaft timing gear, and tensioner pulley; 3. Loosen the tensioner pulley mounting bolt by a quarter to half a turn, compress the automatic tensioner pushrod to the lowest position, insert a steel pin into the hole, adjust the pulley with a snap ring pliers, rotate counterclockwise to align the two adjustment holes of the pulley parallel to the ground, tighten the fixing screw, and remove the steel pin; 4. Rotate the crankshaft clockwise for two turns, check if the timing marks are correctly aligned, then reinstall the lower outer timing belt cover and the upper outer timing belt cover on the right side of the engine; 5. Reinstall the generator and air conditioning compressor belts, start the engine, and check for any abnormalities.
14
3
Share

Where is the handbrake on a Mercedes-Benz?

Mercedes-Benz handbrake is located on the left side of the steering column, with a button marked with the letter P. The Mercedes-Benz C-Class features an electronic parking brake that doesn't require manual operation; it automatically engages when the engine is turned off and the door is closed, tightening the handbrake. For manual operation, there's a button marked with the letter P below the left side of the steering wheel—press it to engage the handbrake and pull it to release. The parking brake, also known as the handbrake or the parking gear in automatic transmissions, provides resistance to prevent the car from rolling when parked. It locks the drive shaft or rear wheels. The parking brake applies much less force than the service brake, just enough to prevent the car from rolling on a slope.
18
3
Share

What are the letter assignments for license plates in Jilin?

Jilin license plate letter assignments are as follows: Ji A is Changchun City, Ji B is Jilin City, Ji C is Siping City, Ji D is Liaoyuan City, Ji E is Tonghua City, Ji F is Baishan City, Ji G is Baicheng City, Ji H is Yanbian Korean Autonomous Prefecture, Ji J is Songyuan City. Jilin Province, abbreviated as Ji, is a provincial-level administrative region of the People's Republic of China, with Changchun as its capital. Jilin Province is located in the central part of Northeast China, bordering Liaoning, Inner Mongolia, and Heilongjiang, and also shares borders with Russia and North Korea, situated at the geographical center of Northeast Asia. Jilin stretches 769.62 kilometers from east to west and 606.57 kilometers from north to south, covering a land area of 187,400 square kilometers, accounting for 2% of the country's total area.
12
4
Share

What is the difference between tire pressures of 2.4 and 2.5?

Tire pressures of 2.4 and 2.5 are essentially not much different. The normal tire pressure for a car is between 2.3 and 2.5 bar, and typically, tire pressure values within this range are the safest. When tires come into contact with the ground, they experience some wear, and since the degree of wear varies for each tire, the tire pressure values for each tire will also differ. Generally, the front tires of a car have higher pressure than the rear tires because the front of the vehicle houses the engine, making the front part heavier and thus requiring slightly higher tire pressure in the front wheels. Car owners only need to ensure that the tire pressures for both front wheels are the same and that the pressures for both rear wheels are consistent; it is not necessary for all four wheels to have identical tire pressures.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.