···
Log in / Register

Where is the cabin air filter located in the Haval M6?

4 Answers
DelKing
07/29/25 6:43pm

The cabin air filter in the Haval M6 is located behind the glove box in front of the passenger seat. The cabin air filter used in vehicles is a consumable item that tends to degrade after a period of use. Generally speaking, it needs to be replaced approximately every 10,000 kilometers. There are two types of cabin air filters used in vehicles: one is a standard cabin air filter, and the other is an activated carbon cabin air filter. When replacing the cabin air filter, it is recommended to opt for the activated carbon version. The activated carbon cabin air filter not only filters out external impurities but also absorbs odors generated by prolonged operation of the air conditioning system. The Haval M6 is a compact SUV under the Haval brand, positioned as a value-for-money family vehicle.

Was this review help?
6
1
Share
Easton
08/14/25 12:07pm

The cabin air filter of the Haval M6 is located behind the glove box. I've replaced it several times, and you need to pull out the glove box first. Open the door and look at the passenger side, there's a plastic compartment. Just pull it out with some force or use a screwdriver to release the clips. Inside the compartment, there's a filter cover, and once you unscrew it, you can see the filter itself. The position is standard, similar to most SUVs. I recommend changing it regularly, otherwise the air quality will deteriorate, and odors will accumulate, affecting health, especially if there are children at home. Generally, it should be replaced every 10,000 kilometers or every six months. Doing it yourself saves money and is convenient, with tutorial videos available online. Buying the same model filter costs around 20-30 yuan. Don't force the glove box open, as it can easily damage the plastic parts. Not replacing it for a long time can also overload the AC fan, shortening its lifespan. In short, find some free time to try it, don't delay too long.

Was this review help?
12
1
Share
Expand All
Gerald
10/14/25 7:45am

The Havel M6's cabin air filter is located inside the glove compartment on the passenger side. As an ordinary car owner who enjoys DIY, I find it quite accessible. After pulling down the glove box, you'll see a small door which leads to the filter's position. Replacing it isn't difficult and takes about ten minutes, significantly improving the air freshness inside the car. I often remind my friends to change the filter regularly, as a dirty filter can blow dust into the cabin, causing allergies or throat irritation, especially during long drives. The hidden design is well thought out and doesn't interfere with other components. You can usually purchase replacement filters at auto parts stores, with carbon fiber ones being a better option as they absorb odors more effectively and are reasonably priced. Compared to older models where the filter is in the engine bay and harder to replace, the M6's design is more user-friendly. If it's your first time, refer to the manual or search online for step-by-step instructions—take your time and prioritize safety to avoid injury.

Was this review help?
6
4
Share
Expand All
MakaylaAnn
11/27/25 8:40am

The Havel M6's cabin air filter is located behind the glove box, which I discovered during my first replacement. Open the glove box latch on the passenger side, remove it, and look inside - the filter sits beneath a square cover. Changing it yourself is super easy: prepare a new filter, unscrew the cover, replace it, and put everything back. This design prevents accidental contact with other components, and the inward position ensures good protection. Regular replacement improves air quality and reduces bacterial growth.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

What is the proper tire pressure for a sedan?

For small cars, the normal standard tire pressure is between 2.2-2.5 bar. Below is an introduction about tire pressure: 1. Normal range: The appropriate tire pressure is between 2.3 2.7 BAR. In summer, when temperatures are high, the tire pressure may rise above 3.0 BAR after driving, so a summer tire pressure value between 2.3 2.5 BAR is more suitable. 2. Over-inflation: Over-inflation reduces tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; makes tires more susceptible to punctures from sharp objects like nails or glass, leading to internal cracks, blowouts, and potential tire bursts. 3. Under-inflation: Increases friction with the road surface, raising fuel consumption; causes heavy steering and deviation, posing risks to driving safety; increases movement in various tire parts, leading to abnormal heat generation from excessive rolling; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength, which can cause blowouts during high-speed driving; under-inflation increases tire deformation, making the sidewalls prone to cracks and causing flexing movements, leading to excessive heat, rubber aging, ply fatigue, and cord breakage, while also increasing the tire's contact area with the ground, accelerating shoulder wear.
19
0
Share

Where are the accelerator, brake, and clutch pedals located in a car?

In a car, the clutch pedal is on the left, the brake pedal is in the middle, and the accelerator pedal is on the right. Below are some precautions regarding the operation of the accelerator and clutch pedals. 1. Starting: When starting a manual transmission car, it is essential to use the clutch properly. The key points for operating the clutch pedal during starting are: quick initial lift, slow adjustment when reaching the semi-engagement point, and coordinated movement. Initially, lift the clutch pedal quickly, then slow down the lifting speed when the semi-engagement state is reached. While lifting the clutch pedal, gradually press the accelerator pedal according to the engine resistance to ensure a smooth start. Mastering this technique helps avoid stalling the engine while driving. 2. Gear shifting while driving: When shifting gears during driving, the clutch pedal must be pressed. The clutch pedal should be pressed and released quickly without lingering in the semi-engagement state, as this can accelerate clutch wear. Pay attention to coordinating the accelerator during gear shifts. Inaccurate coordination between the accelerator and clutch may result in jerky gear shifts, causing wear to the car's transmission and reducing ride comfort. Some experienced drivers use the double-clutching method during gear shifts, but this is not recommended for novice drivers. 3. Pressing the clutch when stopping: The clutch should be pressed when stopping the car in daily driving. Not using the clutch when stopping can easily lead to stalling, cause impact on the transmission, and in severe cases, affect the engine's lifespan, increasing the owner's maintenance costs. Proper use of the clutch ensures smooth and stable stopping.
8
3
Share

What is the function of an automotive oil filter?

Automotive oil filter is used to: filter the engine oil, improving its cleanliness and lubricity, thereby reducing engine wear and ensuring optimal performance. The automotive oil filter, also known as the oil filter, operates similarly to the circulatory system of the heart—the oil in the oil pump continuously circulates, during which many impurities are generated, requiring the oil filter to remove them. Recommended replacement interval for automotive oil filters: replace every 5,000 to 10,000 kilometers driven. It is advisable to replace the oil filter every time the engine oil is changed because contaminants in the old oil filter can reduce the viscosity and cleanliness of the new oil, affect oil circulation speed, and potentially damage the engine.
17
3
Share

How to Adjust the Date on a Dash Cam?

To adjust the date on a dash cam: Click the menu on the dash cam, find the settings option, select the date and time settings, and adjust the time to the current accurate time. Reasons for incorrect dates on dash cams: 1. Dead battery: The dash cam does not retain time memory when powered off; replacing the battery will solve the issue. 2. Loop recording time setting: If set too short or too long, it may cause time desynchronization; setting an appropriate loop recording time will resolve this. The main functions of a dash cam are to record road conditions, prevent fraud, serve as evidence for liability determination in case of accidents, and capture scenic views during the journey.
12
0
Share

What is the fault when the excavator safety lock is opened but there is no action?

Excavator safety lock opened but no action fault diagnosis. Check hydraulic oil level: Blocked hydraulic circuit suction filter, oil circuit suction vacuum (including excessively low hydraulic tank oil level) can cause insufficient oil suction or even failure to draw oil in the hydraulic pump. These will directly lead to insufficient oil pressure in the hydraulic circuit, resulting in no movement of the excavator. This type of fault can be diagnosed by checking the hydraulic tank liquid level and the contamination degree of the hydraulic oil. Check if the hydraulic pump has malfunction: Hydraulic excavators generally use 2 or more main pumps to supply pressurized oil to the system.
12
4
Share

Does the Classic Sylphy have ESP?

Classic Sylphy does not have ESP. ESP stands for Electronic Stability Program, which helps maintain optimal vehicle stability under various conditions, particularly effective in cases of oversteer or understeer. More information about ESP is as follows: 1. The ESP system is essentially a traction control system. Compared to other traction control systems, ESP not only controls the drive wheels but also the non-drive wheels. 2. For example, in rear-wheel-drive vehicles that often experience oversteer situations where the rear wheels lose control and cause the car to fishtail, ESP will brake the outer front wheel to stabilize the vehicle. In cases of understeer, to correct the tracking direction, ESP will brake the inner rear wheel to adjust the driving direction.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.