Where is the cabin air filter located in the Great Wall Haval H6?

Does a full car repaint require complete removal of the original paint?

When repainting the entire car, it is not necessary to grind off the original paint, but attention should be paid to color differences in the original painted areas. Relevant explanations are as follows: 1. Precautions: For paint mixing, pay attention to color differences. Take protective measures; areas that are not to be painted must be covered with newspaper or other isolation tools. Also, pay attention to the gun pressure and working environment during painting. Finally, consider the baking time. 2. Painting trajectory: The correct spraying trajectory should remain perpendicular to the surface of the workpiece. When spraying, depending on the angle of the surface being painted, the distance between the spray gun and the surface is generally 15~30cm. To achieve a wetter, darker, and thicker coating, the distance can be closer; to achieve a drier, lighter, and thinner coating, the distance can be farther.

8

3

Share

Does the Lingpai have a 4-cylinder engine?

The Lingpai is equipped with a 4-cylinder engine, which is produced by Dongfeng Honda's engine factory and is classified as a domestically manufactured engine. The Lingpai 1.5L version's engine model is LEB41, with a maximum horsepower of 109 hp and a maximum power output of 113 kW. The 1.0T version's engine model is R18z7, with a maximum horsepower of 122 hp, a maximum power output of 90 kW, and a maximum torque of 173 Nm. For daily maintenance of the Lingpai engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard being no lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine issues. To avoid malfunctions, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil, but in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

9

1

Share

How to Repair an Air Conditioning Compressor?

It is recommended to have a professional technician inspect and repair it based on the actual situation. The relevant introduction is as follows: 1. The air conditioning compressor plays a role in compressing and driving the refrigerant in the air conditioning refrigerant circuit. The air conditioning compressor is generally installed in the outdoor unit. The air conditioning compressor draws the refrigerant from the low-pressure area, compresses it, and sends it to the high-pressure area for cooling and condensation. The heat is dissipated into the air through the heat sink, and the refrigerant changes from a gaseous state to a liquid state, with the pressure increasing accordingly. The working circuit of the air conditioning compressor is divided into an evaporation area and a condensation area. 2. The indoor unit and outdoor unit of the air conditioner belong to the low-pressure or high-pressure area, respectively. The refrigerant then flows from the high-pressure area to the low-pressure area and is sprayed into the evaporator through the capillary tube, causing a sudden pressure drop. The liquid refrigerant immediately turns into a gaseous state, absorbing a large amount of heat from the air through the heat sink. As the air conditioning compressor continuously operates, it continuously absorbs heat from the low-pressure area into the refrigerant and then sends it to the high-pressure area to dissipate into the air, thereby regulating the temperature.

8

0

Share

Is WEY a Domestic Brand?

WEY is a domestic brand. Below is a detailed introduction to the WEY brand: 1. WEY is a domestic luxury SUV brand established in 2016. It was developed by the renowned Chinese automaker Great Wall Motors, which invested four years and a research and development team of over 1,600 people to create this Chinese luxury SUV brand. Its product lineup includes models such as the VV5, VV6, VV7, and VV7 PHEV. 2. The Chinese name for the WEY brand is Wei Pai, named after the surname of its founder, Mr. Wei Jianjun. With the confidence and dream of pioneering Chinese luxury SUVs, WEY aims to be a trailblazer and innovator of its era. The WEY brand was born in November 2016 and reached the pinnacle of domestic SUVs from its inception, not only marking the beginning of domestic luxury SUVs but also becoming a leader in the segment. The brand's logo is inspired by the iconic flagpole at the "Baoding Zhili Governor's Office" in Baoding, China, the birthplace of Great Wall Motors. It bears the brand's commitment and pursuit: to become a global leader in luxury SUVs and elevate Chinese brands. 3. WEY is dedicated to creating luxury SUVs, continuously innovating and reforming its automotive technologies, most notably in new energy and intelligent safety technologies. Based on new energy technology, WEY has developed industry-leading technical routes such as pure electric, hybrid, and hydrogen fuel, accelerating its comprehensive decarbonization plan and electrification strategy. By pioneering in the clean energy sector, WEY has established brand advantages and quickly seized the high ground in new energy technology. Intelligent safety technology reflects WEY's extreme pursuit of safety. The WEY Safety System innovates in four aspects: life, property, information, and environment, providing consumers with highly considerate services. 4. Since its inception, the WEY brand has been committed to becoming a world-class luxury SUV brand and a pioneer and leader in the industry. For an industry to develop healthily, technological innovation is essential, and complacency must be avoided—WEY has excelled in this regard. Its R&D teams are spread across the globe, forming a "seven countries, ten locations" R&D layout, fostering collaborative development in products, technologies, and talent. Originating from China, WEY represents China on the global stage.

13

5

Share

What to Do When the Engine Warning Light on the Dashboard Comes On?

If the engine warning light comes on, you can follow these steps to address the issue: First, check whether the engine is running normally. Look for signs such as shaking, black smoke, or difficulty starting. If any of these issues are present, avoid restarting the engine. Note: If the light is red, do not attempt to restart the engine under any circumstances. If the engine is running normally and the vehicle can still be driven, visit a service center as soon as possible to diagnose the problem. A service center can easily read the fault codes using a portable diagnostic tool, allowing for targeted repairs based on the fault information. If the engine is running normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection may be the cause. Alternatively, repeatedly turning the key to the ON position may reset the light. Generally, the engine warning light may come on due to the following seven reasons: Sensor malfunction: This includes sensors such as the coolant temperature sensor, crankshaft position sensor, air flow sensor, intake air temperature sensor, and oxygen sensor. If these sensors are damaged, have poor connections, or lose signal transmission, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel or oil quality issues: Failure to use the fuel or engine oil recommended by the manufacturer may lead to engine wear, causing the warning light to illuminate. Poor combustion of the air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will activate. Common causes include faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines. Turbocharger issues: Problems with the intake boost system or turbocharger can trigger the engine warning light. The most common issue is turbocharger failure, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Air intake issues: Blockages in the engine's air intake system can lead to the warning light turning on. A dirty or uncleaned air filter is a frequent cause. Exhaust system issues: Faults in the exhaust system, such as a malfunctioning rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, can trigger the warning light. The catalytic converter is particularly prone to damage from leaded gasoline, improper oil additives, physical impact, or fuel system issues. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the immobilizer and engine control unit are mismatched, the engine may not operate correctly, and the warning light will illuminate.

4

3

Share

Does ETC need to be transferred after vehicle ownership transfer?

ETC does not need to be transferred after vehicle ownership transfer. There are three ways to handle ETC after vehicle transfer: When the vehicle transfer is completed and the license plate number remains unchanged, you can go to the bank branch where it was originally processed to complete the information change procedures; When the vehicle is transferred and the license plate number is changed: complete the unbinding procedure, then reapply for ETC for the new vehicle according to regulations; After vehicle transfer occurs, cancel ETC. ETC charging principle: There will be one or more ETC lanes on highways. Through microwave dedicated short-range communication between the on-board electronic tag installed on the vehicle windshield and the microwave antenna in the ETC lane of the toll station, computer networking technology is used to conduct background settlement with the bank, achieving the purpose of vehicles not needing to stop at road and bridge toll stations to pay road and bridge fees. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Save time: eliminates the hassle of waiting in line; Green and environmentally friendly: green and low-carbon, vehicles passing through toll stations without stopping can reduce noise and exhaust emissions, reducing pollution; Save wear and tear: save costs, reduce the frequency of vehicle starts and brakes, and reduce wear and fuel consumption; Improve efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban agglomerations will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased," and clearly proposed in the main indicators of the "13th Five-Year" comprehensive transportation development that "by 2020, the ETC usage rate of road passenger vehicles will reach 50%". More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the usage rate of ETC passenger vehicles, the future will also promote the use of ETC for trucks, explore the deep integration of the ETC system with the development direction of smart transportation such as vehicle-to-vehicle communication and vehicle-road coordination, and provide car owners with comprehensive travel services, which means that more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front stopping, to prevent the ETC device of the vehicle in front from malfunctioning or not having an ETC device at all, keep a distance of more than 10 meters from the vehicle in front to prevent automatic sensing from paying for the vehicle in front. The recognition speed for passing through ETC lanes is 20km/h. If the speed is too fast, the vehicle device information cannot be read, which will also lead to charging failure. Unauthorized disassembly or movement of the OBU device, ETC electronic tag falling off or loosening, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was processed or the highway office for testing. Non-human loosening or falling off only requires reactivation. When using a debit card to bind ETC, insufficient balance will also lead to charging failure. You can follow the guidance of on-site staff to go to the manual MTC lane and use cash or card to pass. The windshield of the car is too thick, resulting in poor sensing. Especially for vehicles that have been repaired after an accident and have had the windshield replaced, or friends who have modified the front windshield need to pay attention.

6

0

Share

Where is the cabin air filter located in the Great Wall Haval H6?

Does a full car repaint require complete removal of the original paint?

Does the Lingpai have a 4-cylinder engine?

How to Repair an Air Conditioning Compressor?

Is WEY a Domestic Brand?

What to Do When the Engine Warning Light on the Dashboard Comes On?

Does ETC need to be transferred after vehicle ownership transfer?

Are Flood-Damaged Cars Directly Scrapped?

What are the consequences of a leak in the middle section of the exhaust?

What is the Difference Between a Limited-Slip Differential and a Differential Lock?

Which region does the license plate starting with Dan K belong to?