Where is the cabin air filter located in the Great Wall Haval H5?

1 Answers
Camila
07/30/25 2:31am
The cabin air filter in the Great Wall Haval H5 is located inside the glove compartment on the passenger side. To replace the cabin air filter, you must first remove the glove compartment. The Haval H5 is an ORV off-road vehicle under Great Wall Motors, equipped with the company's self-developed Green Quiet 2.0T diesel engine and 2.0T gasoline engine, featuring popular contemporary configurations such as CarLife smartphone connectivity and DTS sound effects. The Haval H5 measures 4645mm in length, 1800mm in width, and 1775mm in height, with a wheelbase of 2700mm. In terms of exterior design, the Haval H5 Classic Edition maintains a rugged off-road style, featuring a bold three-slat chrome grille that exudes strength, along with 18-inch aluminum alloy wheels. Higher trim levels also come equipped with a sunroof.
Was this review help?
8
5
Share
More Forum Discussions

How to Check if the Driver's License Has Been Issued?

Driver's licenses are generally issued on-site and require personal signature for collection. Relevant information: 1. Definition: The full name of a driver's license is the motor vehicle driver's license, also known as a "driving license," which is a certificate required by law for motor vehicle drivers. 2. Expansion: Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive arbitrarily. Generally, individuals cannot drive on the road without a license. However, for those who have already mastered safe driving techniques, the document that permits them to drive on the road is the "driver's license." This indicates that a driver's license is a type of "permit."
18
3
Share

Is Replacing the Front Bumper Beam Considered a Major Accident?

Repairing or replacing the bumper beam does not constitute a major accident. Below is an introduction to the definition of an accident vehicle: An accident vehicle refers to a vehicle that has suffered damage due to non-natural wear and tear, resulting in a decline in mechanical performance and economic value. Generally, accident vehicles are those with structural damage. Additionally, flood-damaged cars and fire-damaged cars also fall under the category of special accident vehicles. Here is an introduction to the function of the automotive bumper beam: 1. Evenly distributing force: When a vehicle is involved in a collision, the front bumper beam can distribute the energy generated from any form of offset or frontal collision as evenly as possible between the two energy-absorbing brackets, allowing the energy to be absorbed to the maximum extent by the energy-absorbing brackets and evenly transmitting the collision force to other energy-absorbing parts. 2. Protecting components: During low-speed rear-end collisions in urban areas, the front bumper beam plays a certain role in protecting components such as the fenders, radiator, hood, and lights. The rear bumper beam can reduce damage to areas such as the luggage compartment, tailgate, and rear light assembly.
12
3
Share

Why Does the Car Steering Wheel Always Pull to One Side?

The following is a related introduction to car steering wheel pulling to one side: 1. Check the front tire pressure: Check whether the front tire pressure is consistent. If one side is too low, it should be inflated. 2. Check the low leaf spring: If the tire pressure on both sides is equal, but when viewed from the front to the back, one side is high and the other side is low, check whether the leaf spring on the low side is broken. If it is not broken, the spring is too soft or lacks sufficient curvature and should be replaced. 3. Touch the brake drum by hand: After driving a certain distance, touch the brake drum by hand. If any individual brake drum is hot to the touch, it indicates that the wheel brake is dragging and should be adjusted. 4. Touch the brake drum by hand: If the pulling phenomenon still occurs after the above checks, check whether the front axle and frame are deformed and whether the front wheel alignment is out of specification. If necessary, correct the deformation.
10
4
Share

Is There an Age Limit for Applying for a Driver's License?

There are age restrictions for applying for a driver's license, with the maximum age limit being 70 years old. Below are the relevant details: 1. Small vehicles: Applicants for small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and light motorcycles must be between 18 and 70 years old. 2. Motorcycles: Applicants for ordinary three-wheel motorcycles, ordinary two-wheel motorcycles, or wheeled self-propelled motorcycles must be between 18 and 60 years old. 3. Medium-sized passenger vehicles: Applicants for medium-sized passenger vehicle licenses must be between 21 and 50 years old. 4. Tractor vehicles: Applicants for tractor vehicle licenses must be between 24 and 50 years old. 5. Large passenger vehicles: Applicants for large passenger vehicle licenses must be between 26 and 50 years old. Applicants for city buses, large trucks, trolleybuses, or tram licenses must be between 20 and 50 years old.
19
1
Share

What are the pros and cons of changing tires from 235 to 245?

The following is a related introduction to the pros and cons of changing tires from 235 to 245:1. Pros: Changing tires from 235 to 245 can increase the car's grip, making it more stable at high speeds.2. Cons: Changing tires from 235 to 245 may also affect the car's acceleration to some extent and lead to increased fuel consumption. Notes: When changing tire sizes, it is necessary to choose tires that match the original car. If the tires are too large, they may hit the fender and damage the vehicle. The changed tires should not be too wide or too large in size, otherwise, it may affect the car's handling and increase fuel consumption.
3
0
Share

What to Do If You Can't Control the Speed in C2 Subject 2?

Here are the solutions for not being able to control the speed in C2 Subject 2: 1. During driving: You need to lightly press the accelerator or lightly press the brake when the speed is too fast. 2. At the start: Place the sole of your foot on the clutch pedal with your heel on the ground as a support point. When the clutch is pressed to the lowest point, keep your knee slightly bent. Slowly release the clutch to the semi-engaged position, then release the brake until the car starts moving slowly. Here is an introduction to the Subject 2 test: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The C1/C2 test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions also have a sixth item: high-speed card collection.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.