Where is the cabin air filter located in the Ford Mondeo Zhisheng?

What are the solutions for CRV shaking when the air conditioner is turned on?

Here are the reasons and solutions for Honda CRV idle shaking: 1. Severe engine carbon deposits: The most common cause of car shaking is dirty throttle or excessive carbon deposits in the fuel injector. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean mixture during cold starts, making it difficult to start. In this situation, the car can only start easily after the carbon deposits are saturated with gasoline. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction for combustion, making the mixture too rich. The engine's combustible mixture alternates between being too lean and too rich, causing idle shaking after a cold start. Additionally, the lower the temperature, the more fuel is needed for a cold start, and the presence of carbon deposits will affect the smoothness of the cold start. The solution is to clean the fuel system and check if the idle speed motor has carbon deposits that need cleaning. 2. Ignition system issues: Check the working condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or bad spark plug firing can also cause such faults. The solution is to check if the spark plugs have excessive carbon deposits and replace them if necessary. 3. Unstable oil pressure: If you have already cleaned the engine carbon deposits, cleaned the throttle, replaced the oil pad and spark plugs, but still notice body shaking at idle, it is recommended to go to a 4S shop to check the fuel supply pressure and the intake pressure sensor. If the fuel pump supply pressure is abnormal or the intake pressure sensor values are incorrect or malfunctioning, it can cause body shaking. The solution is to check the oil pressure and replace parts if necessary. 4. Aging engine components: Car shaking can also be related to aging engine mounts. Engine mounts are actually the shock absorption system of the engine. They absorb the slight vibrations of the engine during operation. If the engine mounts are faulty, these vibrations will be transmitted to the steering wheel and the interior of the car, causing shaking at idle. Carbon deposits can form in certain areas, especially the throttle. If the throttle is very dirty, it will obstruct the air intake, causing the engine to barely or insufficiently drive the compressor. This is why the car shakes when the air conditioner is turned on.

11

1

Share

What does it mean when the ABS light on the car is on?

When the ABS light is displayed on the car, it means there is a malfunction in the vehicle's Anti-lock Braking System. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. There are several states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed or the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, causing the ABS light to turn off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down fully with your fingers, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

3

4

Share

What Causes the Engine Warning Light to Illuminate in the Golf 8?

There are primarily 7 reasons why the engine warning light illuminates in a Golf: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen levels, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, which triggers the engine warning light. Fuel quality issues: If fuel or engine oil is not added according to the manufacturer's specifications, it may cause engine wear, leading to the warning light turning on. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Issues such as faulty spark plugs, ignition coils, fuel pump failures, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Turbocharging problems: The intake turbocharging pipeline or turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If the vehicle's intake system malfunctions, it may lead to blocked engine pipelines, and in severe cases, trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake issues. Exhaust problems: Exhaust faults can also cause the engine warning light to illuminate. Common causes include faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, with the catalytic converter being the most frequent issue. Using leaded gasoline, lead- or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system failures can easily lead to catalytic converter problems. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there's a mismatch between the anti-theft controller and the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, accompanied by the illumination of the engine warning light. If the engine warning light is on, follow these steps: First, check if the engine is running normally, looking for signs like shaking or black smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will enter self-check mode upon powering up. Wait 5-10 seconds to see if the warning light turns off. If the warning light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.

13

5

Share

What is the difference between GLC and GLA?

The differences between GLC and GLA are: 1. Different body dimensions: GLC has body dimensions of 4661mm, 1898mm, and 1644mm, while GLA has body dimensions of 4417mm, 1807mm, and 1494mm. 2. Different wheelbase: GLC has a wheelbase of 2973mm, while GLA has a wheelbase of 2699mm. 3. Different vehicle types: GLC is a mid-size SUV, whereas GLA is a compact SUV. 4. Different engines: GLC features a 9-speed automatic transmission, while GLA has a 7-speed automatic transmission.

14

4

Share

What does PS mean in a car?

In a car, PS stands for the steering wheel lock indicator. After starting the car, the steering wheel lock light disappears. If the PS light is on, generally the key cannot be turned when inserted. By gently moving the steering wheel left and right, the light will go off, allowing the key to turn and the car to start normally. The steering wheel lock is a very basic anti-theft feature in cars. Its principle involves a spring-controlled steel pin that, when the key is removed, pops into a pre-drilled hole if the steering wheel is turned, locking it in place and preventing rotation. When the steering wheel is locked, it cannot be turned, the key cannot be turned either, and the car cannot be started, thereby achieving anti-theft.

16

0

Share

What Causes Abnormal Noise When Accelerating the Engine?

Here are the specific reasons for abnormal noise when accelerating the car: 1. Exhaust system failure: Noise caused by exhaust gasket leakage or exhaust pipe perforation. 2. Intake system failure: Air leakage or poor sealing in the intake manifold or throttle body. 3. Engine chassis-related issues: Internal engine noise or loose surrounding accessories, or abnormal noise/resonance from chassis components due to looseness or interference. 4. Transmission internal failure: Abnormal noise during driving caused by insufficient lubrication or abnormal wear.

4

5

Share

Where is the cabin air filter located in the Ford Mondeo Zhisheng?

What are the solutions for CRV shaking when the air conditioner is turned on?

What does it mean when the ABS light on the car is on?

What Causes the Engine Warning Light to Illuminate in the Golf 8?

What is the difference between GLC and GLA?

What does PS mean in a car?

What Causes Abnormal Noise When Accelerating the Engine?

What are the differences between the 2018 and 2019 Buick Verano?

What is the wading depth of the Tiguan L?

How much fuel does the Emgrand consume when the air conditioning is on?

Reasons for the Malfunctioning Dashboard of Haval H6?