Where is the cabin air filter located in the Ford Mondeo Zhisheng?

2 Answers
StMiranda
07/29/25 1:05am
The cabin air filter in the Ford Mondeo Zhisheng is located in front of the brake pedal and can only be seen after removing the brake pedal. The cabin air filter removes pollutants from the air, such as exhaust fumes, dust, powder, bacteria, and particles, providing clean and fresh air inside the vehicle to ensure the health of the occupants. The Ford Mondeo Zhisheng is a mid-size car with dimensions of 4854mm in length, 1886mm in width, and 1495mm in height, with a wheelbase of 2850mm. The vehicle is equipped with features such as front parking sensors, blind spot monitoring, rearview camera system, tire pressure monitoring system, electric child safety locks, and rain-sensing wipers.
Was this review help?
14
3
Share
McEva
08/12/25 5:14am
I've been driving a Ford Mondeo for five years, and the cabin air filter is actually located behind the glove compartment on the passenger side. You just need to remove the glove box panel by gently prying open the clips to access the filter cover. The design is quite user-friendly, making it easy for owners to replace it themselves. The filter's role is to trap dust and pollen, especially during seasonal changes when unpleasant odors can develop if the AC isn't running—I check mine every six months to prevent clogging. When replacing it, remember to turn off the engine and disconnect power, and avoid yanking on cables. For DIY replacements, I recommend using genuine OEM filters, which cost around 20 yuan and aren't expensive. If the position seems too deep, take it step by step to avoid damage.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Can I Continue Driving After Turning Off the Engine and Checking the Coolant?

No. When the car prompts you to turn off the engine and check the coolant, it indicates that the coolant level is low, causing the engine to overheat. Additionally, issues such as poor grounding of the coolant pump, coolant pump failure, or excessive dirt in the radiator can also lead to this situation. Related to coolant level: In this case, you need to check whether the coolant level is normal, whether the radiator fan is functioning properly, whether the radiator is severely clogged with dirt, and whether there is corrosion or poor contact in the coolant pump's grounding. Coolant: Coolant, also known as antifreeze, is a liquid composed of antifreeze additives, additives that prevent metal corrosion, and water. It must possess properties such as antifreeze capability, corrosion resistance, thermal conductivity, and resistance to deterioration.
1
0
Share

Which line should you stop at for hill start?

Stop at the wide white stop line, which is the same as the stop line at a red light. Below is the relevant introduction to the Subject 2 driving test: Medium and large-sized vehicles: Large buses, tractors, city buses, medium-sized buses, and large trucks are tested on: parallel parking, side parking, driving over a single-plank bridge, curve driving, right-angle turns, passing through a restricted-width gate, navigating continuous obstacles, driving on bumpy roads, narrow-road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, driving in rain (fog), slippery roads, and emergency handling. Small vehicles: Small cars, small automatic transmission cars, small automatic transmission passenger cars for disabled individuals, and low-speed trucks are tested on: reverse parking, hill start and stop, side parking, curve driving, and right-angle turns.
20
0
Share

Which way to steer when reversing into a tight space?

When reversing into a tight parking space, steer in the opposite direction. Here is an introduction about reverse parking: Introduction: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is one of the assessment points in the driver's test, requiring the driver to correctly reverse the vehicle into the garage from both sides while in motion. Evaluation criteria: Failing to follow the designated route or sequence results in disqualification. Having the vehicle body cross the line or failing to complete the reverse parking results in disqualification. Exceeding 210 seconds to complete the reverse parking results in disqualification. Stopping midway deducts 5 points each time.
10
2
Share

What Transmission Does the Chevrolet Orlando Use?

The Chevrolet Orlando is equipped with a 6-speed manual transmission and a 6-speed automatic manual transmission. This vehicle is powered by a 1.3T turbocharged engine, delivering a maximum power of 120 kW and a maximum torque of 230 Nm. In terms of body dimensions, the Chevrolet Orlando measures 4684 mm in length, 1807 mm in width, and 1628 mm in height, with a wheelbase of 2796 mm. Exterior-wise, the Chevrolet Orlando adopts the Chevrolet family design language, featuring a front fascia with the family-style dual grille design that is narrower at the top and wider at the bottom, complemented by a high-gloss black trapezoidal grille that accentuates the large-mouth shape, paired with the raised muscular lines on both sides of the hood.
12
4
Share

Where is the start button of Audi A6?

The start button of Audi A6 is located below the air conditioning panel and in front of the gear lever. The steps to start the engine are as follows: 1. Press the one-touch start button; 2. Step on the brake pedal to prepare for starting the vehicle; 3. Place the gear lever in the P position; 4. Press the one-touch start button again; 5. The tachometer on the dashboard rotates, indicating that the vehicle has been started. Audi A6 is a model under FAW Audi, with a length, width, and height of 5012 mm, 1855 mm, and 1485 mm respectively, and a wheelbase of 2945 mm. In terms of appearance, the rear upper part of the Audi A6 has been changed from a rounded streamline to a slightly raised edge, which has the effect of a spoiler and can provide sufficient grip for the vehicle when driving at high speed.
12
0
Share

How to Adjust the Headlights of a Camry?

Camry headlight adjustment method: 1. Start the car, wait for the dashboard to light up, locate the car's light button, and then turn on all the vehicle's lights; 2. Drive the car in front of a wall, carefully observe the image of the car's lights on the wall, which allows you to see the height of the lights. If the height difference is not obvious, you can also use a ruler to measure it; 3. Return to the car's driver seat and find the button to open the front hood; 4. Set a horizontal standard based on the observed light image, then locate the screw button for adjusting the height of the lights; 5. For the side with higher lights, turn the height adjustment button counterclockwise while keeping an eye on the changes in the light image on the wall until it aligns with the set horizontal standard. For the side with lower lights, use a tool to adjust clockwise, observing continuously until the light image matches the horizontal standard.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.