Where is the cabin air filter located in the Ford EcoSport?

2 Answers
LaNathan
07/28/25 5:46pm
The cabin air filter in the Ford EcoSport is located behind the glove compartment on the passenger side. It can be easily accessed by removing the glove compartment, and the process of removal and replacement is straightforward, as detailed below: 1. After opening the glove compartment, first release the clips on both sides; 2. Once the glove compartment is removed, the cabin air filter can be accessed. The Ford EcoSport is the first compact SUV under the Changan Ford brand, with dimensions of 4345 mm in length, 1785 mm in width, and 1659 mm in height, and a wheelbase of 2530 mm. The interior of the Ford EcoSport features orange trim panels for a lively visual effect, along with up to 27 flexible and practical storage spaces to meet daily needs.
Was this review help?
16
3
Share
DiElisa
08/11/25 11:51pm
As a guy who often tinkers with cars, I found that the Ford EcoSport's cabin air filter is cleverly hidden behind the glove compartment in front of the passenger seat. To replace it, you first need to open the glove box door and then remove the entire compartment—there are usually small clips on either side or at the bottom of the box. Gently press them to lower or remove the box, revealing the filter housing. Just lift the housing cover, pull out the old filter, and slot in the new one. Ideally, you should replace it every 10,000 km or once a year. The beauty of this design is that even average car owners can DIY it, saving a trip to the dealership and unnecessary expenses. If you drive mostly in the city, where dirty air can harm your health, replacing it sooner ensures peace of mind!
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What does the MODE display in the car mean?

MODE button means switching modes. Here is the introduction of the MODE button: 1. The MODE button is generally used to switch multimedia modes, such as radio and DVD. If you want to switch from radio to DVD, press the MODE button to switch; If the MODE button is set on the central control panel, it is used to switch the air outlet mode of the car air conditioner. It is generally switched among the modes of blowing feet, blowing head and blowing windshield. 2. The MODE button can also be used to switch driving modes. It can cycle between normal mode, sport mode and comfort mode. 3. The MODE button is commonly found on the multifunction steering wheel and the central control panel.
18
2
Share

How to Use the Engine Start-Stop Function in the Lamando?

The Lamando's automatic start-stop system uses a mechanical button. To activate or deactivate it, simply press the button. The automatic start-stop function can only be manually turned off each time or permanently disabled through hidden coding. Some models are equipped with both auto-hold and automatic start-stop functions, eliminating the need to keep the foot on the brake pedal, thereby reducing driver fatigue and improving fuel efficiency. The automatic start-stop system shuts off the engine, but unless the vehicle is also equipped with auto-hold, the driver must keep the brake pedal depressed during this process. The engine will automatically restart when it detects the foot leaving the brake pedal. Auto-hold locks the wheels, removing the need for the driver to press the brake pedal. The brake is released and the vehicle moves forward when the accelerator pedal is pressed again.
20
3
Share

Where is the fuel pump located in a Dodge Journey?

The fuel pump is located inside the fuel tank, which is positioned under the rear seats or beneath the trunk. The main function of the fuel pump is to supply fuel to the engine. It delivers high-pressure fuel to the fuel injection line, ensuring a continuous supply of fuel to the injectors. The fuel pump consists of an electric motor, a pressure limiter, and a check valve, with the electric motor actually operating within the fuel inside the pump housing. Additional relevant information is as follows: 1. Internal type: Integrated with the assembly, vertically installed in the fuel tank. Features include low noise, reduced vapor lock, safety, and simple pipeline installation. 2. External type: Connected in series in the fuel supply line outside the fuel tank. Features include flexible installation and easy replacement, but requires high airtightness.
2
1
Share

Where is the passenger airbag located?

The passenger airbag is installed inside the front dashboard panel. Below is an introduction about airbag information: 1. In the early days when airbags first became popular, they were generally only equipped for the driver. As the importance of airbags became increasingly prominent, most vehicle models now come with both driver and passenger airbags. 2. In the event of an accident, airbags can effectively protect the heads and chests of both the driver and the passenger. This is because a severe frontal collision can cause significant deformation at the front of the vehicle, and the occupants inside will be thrown forward due to the strong inertia. 3. This can lead to collisions with interior components. Additionally, the driver's airbag can effectively prevent the steering wheel from impacting the driver's chest during a collision, avoiding fatal injuries.
12
1
Share

What are the consequences of missing a driving test?

If you miss a driving test, the result of that test will be recorded as a failure. Here is some information about driving tests: 1. Absence policy: If an applicant cannot attend the test at the scheduled time for any reason, they must apply to cancel the appointment at least one day in advance. If the applicant fails to attend the test at the scheduled time without prior cancellation, the test will be marked as a failure. 2. Legal provisions: Each subject can be taken once, and if failed, can be retaken once. If the applicant does not take the retest or fails the retest, the current test session will be terminated, and the applicant must reschedule the test. However, for Subject 2 and Subject 3, the retest must be scheduled at least ten days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passing score for the road driving skills test already taken will remain valid.
1
2
Share

What is the weight of the Vios FS body?

The weight of the Vios FS body is 1085 kg. Body dimensions: Length 4155 mm, width 1700 mm, height 1495 mm, wheelbase 2550 mm. Vios FS hardware: The front suspension is a MacPherson independent suspension, the rear suspension is a torsion beam non-independent suspension, equipped with a 1.5L naturally aspirated engine, maximum horsepower is 110, maximum power is 81 kW, maximum torque is 138 Nm, matched with a 5-speed manual transmission. Vios FS configurations: Keyless start and entry system, leather steering wheel, leather seats, LED daytime running lights, fog lights, while the Polo adds one-touch window control, tire pressure warning, and sport mode.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.