Where is the cabin air filter located in the Dongfeng Renault Koleos?

2 Answers
JayceMarie
07/29/25 4:13pm
Renault Koleos' cabin air filter is located on the passenger side. Japanese cars usually install the cabin air filter behind the glove compartment. Renault Koleos cabin air filter replacement method: 1. First, open the glove compartment cover to replace the cabin air filter. 2. Locate the fixing buckle on the right side of the glove compartment and pull it outward forcefully. 3. Remove the fixing buckle of the glove compartment cover to detach it. 4. Squeeze both sides of the glove compartment towards the middle with both hands to remove the glove compartment. 5. After removing the glove compartment, you can see the cabin air filter cover plate. Press the fixing buckles on both sides of the cover plate forcefully to remove it. 6. Pull the old cabin air filter outward. 7. Install the new cabin air filter and restore it to its original position in the reverse order of disassembly (pay attention to the installation direction of the cabin air filter).
Was this review help?
15
2
Share
McWalter
08/15/25 4:44am
The cabin air filter of the Dongfeng Renault Kadjar is usually hidden behind the glove compartment on the passenger side. You can find it by opening the glove box. When replacing it, first empty the glove box, then gently push outward on both sides where there are clips or stoppers to remove the entire glove box. The filter housing is inside, typically a rectangular plastic cover that can be unscrewed to reveal the filter. Doing it yourself is quite simple, saves money, and avoids the need to go to a shop. If not replaced for a long time, the filter can accumulate dust and mold, causing unpleasant odors when the AC is on, affecting cabin air quality and health. It's recommended to check it annually or every 10,000-20,000 kilometers, just choose a compatible filter model.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

How is the situation of the 2021 Mazda model?

Mazda in China has been struggling to adapt in recent years. Here is the relevant information: 1. Sales performance: The gap with Changan Mazda is widening. According to official data, FAW Mazda sold 69,331 units in the first 11 months of this year, while Changan Mazda sold 122,406 units, a difference of nearly half. At the same time, FAW Mazda's main models have been criticized by consumers due to the "abnormal noise" issue. As the market share of Japanese brands gradually increases, FAW Mazda is facing the risk of being marginalized in the domestic market. 2. FAW Group has completed a series of major structural adjustments: FAW Mazda has been separated from FAW Car and is now directly under FAW Group, on the same level as FAW Toyota. However, the FAW Mazda Atenza still seems to be struggling with the shadow cast by the abnormal noise issue.
11
4
Share

Will Wading Through Water Affect a Scooter Motorcycle?

Motorcycles, as highly mobile road vehicles, may experience water ingress and subsequent malfunctions during daily use due to storage constraints. Forcing the motorcycle through water can result in varying degrees of water ingress. Without timely maintenance, this not only affects normal operation but also accelerates wear and tear on components. Below are additional relevant tips: Important Reminders: 1. When multiple vehicles are wading, avoid entering the water simultaneously. Wait for the preceding vehicle to cross before the next one proceeds. 2. If wheel slippage, spinning, or sinking occurs during wading, stop immediately and turn off the engine to prevent deeper submersion. Use another vehicle to tow the motorcycle out of the water. 3. If the motorcycle wobbles or fails to move forward despite throttle input while crossing a riverbed, its wheels may be stuck between rocks or trapped in sand. Even if the exhaust pipe is submerged, do not let the engine stall—otherwise, water may enter the exhaust, preventing restart. Maintain throttle input; if the motorcycle remains stuck, stabilize the body by placing your feet in the water while gently rocking the handlebars left and right to dislodge the wheels and escape the predicament.
9
1
Share

What to do if there are water stain-like marks on the car window that can't be wiped off?

Hard water stains are mineral deposits formed by elements in the water, mainly calcium and magnesium. Here are some solutions: 1. Method one: Use a vinegar solution. Fill a spray bottle with equal parts water and vinegar. It's best to use pure distilled white vinegar. Dry with a clean, dry towel or paper towel, or use a rubber squeegee to remove the water. Do not let the vinegar solution or water air dry on the glass surface to avoid leaving more stains. 2. Method two: Use other natural products. Replace vinegar with lemon juice. Lemon juice, like vinegar, is acidic and very effective at removing water stains. Add a few drops of essential oil to the water and gently wipe the glass with a sponge or towel. 3. Method three: Use an abrasive cleaner. Purchase an abrasive cleaning powder. The main benefit of abrasive cleaners is that the particles inside provide a slight scrubbing action.
19
2
Share

What to do if the ETC installed in the car falls off?

Under normal circumstances, when the ETC falls off, the small dot on it will also pop out. At this time, all the original information and data of the car owner will disappear, and the ETC will no longer have the function of non-stop toll collection. Below are the measures that should be taken after the ETC falls off: Go to the expressway ETC business hall in the province where the original ETC was issued to reinstall and activate it, and then you can drive normally in the ETC dedicated lane. Below are the precautions when using ETC: 1. Insufficient balance in the ETC card may lead to failure of toll deduction and inclusion in the ETC blacklist. Blacklisted users cannot pass through the ETC lane. This situation can be canceled 24 hours after recharging. 2. After successful activation, the ETC electronic tag should be properly kept, and attention should be paid to moisture-proof, waterproof, and anti-strong magnetic. 3. The ETC device uses solar charging. The battery inside the device has a normal service life of more than 3 years. For users who do not drive frequently, it is recommended to charge the ETC device once a month to extend its service life.
10
3
Share

What are the reasons for insufficient climbing power in Auman trucks?

Auman trucks may experience insufficient climbing power due to fuel quality issues, excessively high gear selection, carbon buildup problems, excessively low or unstable idle speed, and damaged ignition coils, among other factors. Below is relevant information about Auman: 1. Brand introduction of Auman: The Auman brand ("AUTO-MAN") expresses the brand characteristics of "quality, technology, intelligence, and comfort" through its name connotation. On February 18, 2012, Beijing Foton Daimler Automotive Co., Ltd. was officially established. The joint venture will inject advanced technology and management into the Auman brand, further enhancing its competitiveness through comprehensive value chain upgrades and promoting the transformation of China's heavy-duty truck industry from large-scale to strong. 2. Product classification of Auman: Auman's online products are divided into Auman GTL and Auman ETX.
15
1
Share

Turbocharger Leakage Sound During Rapid Acceleration?

There are two possible reasons for turbocharger leakage sound during rapid acceleration. Here are the relevant explanations: 1. There are two possible causes for this situation: it may be due to a damaged wastegate valve of the turbocharger or an air leak in the intake pipe. When this occurs, timely inspection and repair are necessary. Turbocharging technology has been applied to automotive engines for a long time. Turbocharging technology can increase the engine's air intake without increasing the engine displacement. 2. The turbocharger consists of two parts: one is the compressor turbine, and the other is the exhaust turbine. The compressor turbine and exhaust turbine are connected by the same shaft, with the compressor turbine linked to the engine's intake manifold and the exhaust turbine connected to the engine's exhaust manifold.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.