Where is the cabin air filter located in the Dongfeng Fengxing?

1 Answers
DelLaila
07/29/25 7:47pm
The cabin air filter in the Dongfeng Fengxing is located beneath the glove compartment on the passenger side. The functions of the cabin air filter include: 1. Ensuring the filter fits tightly against the housing to prevent unfiltered air from entering the cabin; 2. Separating dust, pollen, and abrasive particles from the air; 3. Preventing condensation on the car windows, ensuring clear visibility for the driver and passengers, and enhancing driving safety. Taking the Dongfeng Fengxing 2015 XL Manual Special Edition as an example, its body dimensions are: length 4320 mm, width 1804 mm, height 1620 mm, with a wheelbase of 2685 mm, a fuel tank capacity of 55 liters, and a curb weight of 1250 kg.
Was this review help?
2
2
Share
More Forum Discussions

Has the Mazda 2 been discontinued?

Mazda 2 has been discontinued. The Mazda 2 was produced by Changan Mazda Automobile Co., Ltd. The dimensions of this car are 3905mm in length, 1695mm in width, and 1480mm in height, with a wheelbase of 2490mm. In terms of suspension, the Mazda 2 uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. For power, the Mazda 2 was equipped with two engines: a 1.3-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine. Both engines feature aluminum alloy cylinder heads and blocks and are paired with either a 5-speed manual transmission or a 4AT transmission.
6
1
Share

Is it necessary to install rain guards on a car?

It is necessary to install rain guards on a car, but the decision should be based on the frequency of rain in the owner's region. If the area experiences frequent rainfall, it is recommended to install rain guards. Rain guards can prevent rainwater from splashing into the car during rain. Although they only allow the windows to be opened slightly, they ensure proper air circulation inside the car, keeping the air fresh. Additionally, rain guards also provide some sunshade, reducing the impact of strong side sunlight on driving visibility. Installation method for rain guards: Choose a sunny day for installation. Before installation, thoroughly clean the adhesive area with a cleaning agent. Remove the protective paper from the adhesive side of the rain guard, then press and hold the rain guard firmly in place for a while. Avoid washing the car for three days after installation.
12
3
Share

How much gear oil should be added to the rear axle of a Toyota Crown at one time?

Toyota Crown rear axle gear oil requires 2L per refill. The rear axle of a car refers to the rear axle of the vehicle. For front-wheel-drive vehicles, the rear axle is merely a trailing axle, serving only a load-bearing function. Typically, a transfer case is also installed in front of the rear axle. The Crown is a mid-to-large-sized car brand under the Toyota Group, with dimensions of 5020mm in length, 1805mm in width, and 1480mm in height, and a wheelbase of 2925mm. In terms of exterior design, the Toyota Crown features a large-mouth front grille design, a sizable U-shaped grille, sharp headlights with integrated LED daytime running lights in a light strip configuration, presenting a rather fashionable appearance.
3
5
Share

How to Turn on the High Beam of Toyota Vios?

Toyota Vios high beam activation method: The high beam switch is located on the lever to the right of the steering wheel. Rotate the switch to the second position and push it forward to turn on the high beam. The high beam adjusts the intensity of the light based on the distance of the filament. The high beam focuses its light, emitting parallel rays that are more concentrated and brighter, capable of illuminating distant and high objects. The Toyota Vios has dimensions of 4300mm in length, 1690mm in width, and 1490mm in height, with a wheelbase of 2550mm, and features front-wheel drive. In terms of suspension, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
20
1
Share

What Causes Ice to Form Inside Car Windows in Winter?

Winter car window icing occurs due to: sudden temperature drops causing water vapor to condense into ice crystals that adhere to the vehicle surface. Methods to remove ice from car windows in winter include: 1. Using 50-60°C warm water to pour over the vehicle body and melt the ice; 2. Turning on the car's heater to blow warm air onto the windows until the ice melts; 3. Using specialized window ice scrapers or rigid plastic scrapers for removal; 4. Applying spray de-icing agents. To prevent ice formation inside car windows: Before reaching the parking spot and after parking/turning off the engine, open windows or doors to equalize interior/exterior temperatures before closing them - this reduces moisture condensation on windows and prevents icing at its source.
18
4
Share

Will I Get Demerit Points and Fines for Speeding Between 10% and 20%?

Speeding between 10% and 20% results in 3 demerit points and a fine, with the fine amount varying depending on the circumstances. Below is an introduction to the penalties for speeding and situations where speeding does not incur demerit points or fines. Penalty Standards for Speeding: Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles at speeds exceeding 20% above the limit on highways or urban expressways, or exceeding 50% above the limit on other roads, as well as driving other motor vehicles at speeds exceeding 50% above the limit, results in 12 demerit points. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles at speeds exceeding but less than 20% above the limit on highways or urban expressways results in 6 demerit points. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on roads other than highways or urban expressways, or driving other motor vehicles at speeds exceeding 20% but less than 50% above the limit, results in 6 demerit points. Driving medium-sized or larger passenger or cargo vehicles or hazardous material transport vehicles on roads other than highways or urban expressways, or driving other motor vehicles at speeds exceeding but less than 20% above the limit, results in 3 demerit points. Driving a motor vehicle below the minimum speed limit on a highway results in 3 demerit points. Situations Where Speeding Does Not Incur Demerit Points or Fines: Speeding by less than 50% on roads with speed limits below 60 km/h. Ordinary vehicles that exceed the speed limit by less than 10% receive a warning without penalty. For example, driving at 128 km/h on a highway with a 120 km/h limit, which is less than 7% over, does not result in demerit points or fines.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.