Where is the cabin air filter located in the Dongfeng Citroen Elysee?

1 Answers
OPaislee
07/29/25 11:40am
Citroen Elysee's cabin air filter is located inside the glove compartment on the passenger side. Below is a detailed introduction of the Citroen Elysee: 1. The cabin air filter of the Citroen Elysee is situated inside the glove compartment on the passenger side. When replacing the filter, there's a black plastic panel above the passenger footwell area with two retractable clips - removing this panel reveals the cabin air filter. The Citroen Elysee cabin air filter is specifically designed for in-vehicle air purification. 2. The Citroen Elysee cabin air filter cleans the air entering the vehicle interior, improving air quality by filtering out impurities such as micro particles, pollen, bacteria, industrial exhaust, and dust. Its functions include: protecting the AC system from contamination, providing clean air for occupants, safeguarding passenger health, and preventing windshield fogging.
Was this review help?
17
4
Share
More Forum Discussions

Is it suitable to drive a sedan in Gannan?

It is suitable to drive a sedan in Gannan, as the road conditions there are generally good. A regular sedan can handle most routes, but there are several mountain road sections where you should drive steadily and slowly, avoiding fatigue driving. Here are some precautions for self-driving trips: 1. Maintain good driving condition: Long-distance drivers must maintain good physical and mental condition, ensuring sufficient sleep before driving. 2. Wear seat belts: Not only the driver and front-seat passengers but also rear-seat passengers need to fasten their seat belts. If there are children under twelve years old in the family, it is recommended to purchase child safety seats produced by reputable manufacturers. 3. Driving in rain or snow: Turn on the fog lights and width lights. Drive slowly, avoid overtaking casually in severe weather, press the accelerator and brake gently, and steer slowly. When overtaking, use the horn and headlights to signal, and only overtake when the vehicle ahead yields. Be extra cautious and slow down in dark and damp areas prone to icing, such as under overpasses and at tunnel entrances.
3
2
Share

What are the symptoms of a blown head gasket in the radiator?

In the radiator, there may be yellow-black oil foam floating on the surface of the coolant, or noticeable water in the engine oil in the oil pan. When these two types of gas leakage become severe, the exhaust may contain water or engine oil. A blown head gasket can exhibit the following symptoms: 1. Insufficient engine power: If the head gasket is damaged between two cylinders, the engine will lack power, the car will feel sluggish, and acceleration will be poor. When the air filter is removed, a 'popping' sound may be heard at the intake pipe during idle. 2. Blue smoke from the exhaust: If the damaged area of the head gasket connects to the oil passage, some engine oil may flow into the cylinder and burn, causing blue smoke from the exhaust. 3. Abnormal noises from the head gasket: If the damaged area of the head gasket is exposed to the outside atmosphere, the engine's performance will decline, fuel efficiency will worsen, and a loud 'popping' noise may be heard from the damaged area.
4
2
Share

Will the bubbles on a newly applied film disappear after drying?

Yes. Occasionally, small bubbles can be left alone. Generally, whether in summer or winter, the adhesive of the film will dry completely within a week at most. Some bubbles will disappear on their own. If bubbles still remain after a week, you can press them with your hand to observe. Often, some bubbles will disappear when pressed. If pressing doesn't help, you can gently pierce the bubble with a needle and then press to release the air. Bubbles appearing after applying car film is a normal phenomenon, and the reasons are as follows: 1. Dust and impurities: The glass surface was not cleaned thoroughly, leaving dust attached. As the adhesive strength of the film increases, pressure builds up around sand particles or dust, causing bubbles. Before applying the film, the car should be carefully cleaned and wiped. 2. Low-quality film: Inferior car films have rough layer structures and are prone to bubbles, wave patterns, etc. Moreover, low-quality films are more likely to lose adhesive after application, which can also create hollow bubbles. It's best to choose high-quality professional car film brands when applying film. 3. Poor installation technique: If the installer lacks skill, uses unprofessional tools, doesn't maximize the removal of moisture during installation, or fails to stretch and flatten the film properly, larger and more numerous bubbles may appear. Experienced and skilled technicians can avoid such issues.
10
2
Share

Will a Chromium-Molybdenum Steel Frame Rust?

Chromium-molybdenum steel frames can rust. Here is relevant information: 1. Function of the frame: The frame, also known as the vehicle's chassis, serves to support and connect the various assemblies of the vehicle, maintaining their correct relative positions and bearing both internal and external loads. It must possess sufficient strength and rigidity to withstand the vehicle's loads and impacts transmitted from the wheels. As a framework structure spanning the front and rear axles, it forms the vehicle's foundation. 2. Importance of the frame: The vast majority of modern vehicles feature a frame that acts as the skeleton of the entire vehicle. Most components and assemblies, such as the engine, transmission system, suspension, steering system, cab, cargo box, and related operating mechanisms, are mounted on the frame. The frame consists of two longitudinal beams and several cross members, supported on the wheels via the suspension system, front axle, and rear axle.
16
1
Share

What is the following distance when driving below 100 km/h on the highway?

The following distance is related to vehicle speed, visibility, and road conditions. Generally, when visibility is less than 500 meters but greater than 200 meters, the speed should not exceed 80 km/h, and the following distance should be more than 150 meters. When visibility is less than 200 meters but greater than 100 meters, the speed should not exceed 60 km/h, and the following distance should be more than 100 meters. When visibility is less than 100 meters but greater than 50 meters, the speed should not exceed 40 km/h, and the following distance should be more than 50 meters. Below is a detailed introduction to methods for judging vehicle distance: 1. Using the rearview mirror to judge the distance to the following vehicle: Based on the physical principle that objects appear smaller with distance, when the image of the following vehicle occupies one-third of the rearview mirror, the distance should be 12 meters. When the image occupies half of the rearview mirror, the distance is 9 meters. When the image occupies the entire rearview mirror, the distance is 3 meters. 2. Judging the distance to the vehicle ahead during urban driving: When the rear bumper of the vehicle ahead is visible from the driver's seat, the distance is approximately 1 meter. When the lower edge of the bumper is visible, the distance is about 2 meters. When the rear tires of the vehicle ahead are visible, the distance is approximately 3 meters.
6
4
Share

Where Are Vehicle Trackers Generally Installed?

Vehicle trackers are typically installed in the following locations: 1. Inside the front and rear bumpers: This is the most common placement due to its high concealment, as most people won't notice it, ensuring sufficient security. Additionally, the bumpers' concave and convex design makes them ideal for housing GPS devices in their grooves. 2. Inside the trunk: The trunk offers ample space with numerous potential installation spots. Simply laying a blanket over the GPS in the trunk is usually enough to conceal it from detection. Another discreet location is near the taillights adjacent to the trunk, which most people overlook. Moreover, satellite signals are relatively unobstructed in the trunk, ensuring optimal tracking performance. 3. Beneath the dashboard under the windshield: Unless the front panel is removed, this location remains virtually undetectable. 4. Inside the spare tire: This is another hidden spot, but it has a drawback. This method generally only applies to spare tires mounted on the rear of the vehicle, not those stored inside the trunk. The multiple metal layers in the trunk, spare tire, and spare tire casing can significantly interfere with the tracker's signal. 5. For wired installations, common locations include the center console, A-pillars, and beneath the steering wheel.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.