Where is the cabin air filter located in the Dongfeng Citroen C4L?

2 Answers
StFinn
07/29/25 8:24am
The cabin air filter in the Dongfeng Citroen C4L is located beneath the windshield wiper drainage channel in the engine compartment. It requires removal of the clips and interior trim panel for access. The functions of the cabin air filter are: 1. Providing fresh air inside the vehicle; 2. Absorbing moisture and harmful substances from the air; 3. Maintaining air cleanliness to prevent bacterial growth, ensuring safety and hygiene; 4. Filtering solid particles from the air. Taking the 2019 manual comfort version Dongfeng Citroen C4L as an example, its body structure is a four-door five-seater sedan with dimensions of 4675mm in length, 1780mm in width, and 1500mm in height, a wheelbase of 2710mm, a fuel tank capacity of 60 liters, and a trunk capacity of 435 liters.
Was this review help?
11
5
Share
Stephanie
08/11/25 5:56pm
I've seen quite a few Dongfeng Citroën C4L cars where the cabin air filter is located right behind the glove compartment on the passenger side. The exact position is: open the glove box, and you might find plastic clips or small screws on both inner sides—remove them to access the filter housing, then simply pull it out to replace with a new one. I change mine every six months because dust accumulation over time affects AC airflow and cabin air freshness. During regular maintenance, if you notice odd smells or weak AC airflow, promptly check if the filter is clogged. DIY replacement is straightforward—just buy an OEM filter for peace of mind, and all you need is a screwdriver. The placement is user-friendly, unlike some cars that hide it in the engine bay, making it a hassle. Doing it yourself takes five minutes and saves over a hundred in labor costs. Remember not to yank the housing forcefully—handle gently to avoid damaging plastic parts.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Is a paint thickness gauge reading of over 1000 microns considered a serious condition?

A paint thickness gauge reading of over 1000 microns is very serious, indicating that the vehicle has experienced severe impact. The typical thickness of automotive paint ranges between 120-180 microns. If the car has been repainted, the thickness will increase. Repainted areas usually measure around 300-500 microns in thickness. If the paint thickness gauge shows a reading as high as 1000 microns, it suggests that the vehicle has undergone body repair work. How to use a paint thickness gauge: With the gauge turned off, press and hold the power button to start it. Reset the gauge's reading to zero. Aim the gauge at the surface of the car paint being measured, maintaining an appropriate distance—neither too close nor too far. Generally, a distance of 5cm is ideal. Read the value displayed on the gauge. For the same paint testing area, measure five points: the four corners and the center. Then calculate the average of these readings. Performance standards for automotive paint: Automotive paint must not only have good mechanical properties, fullness, and high gloss but also excellent adhesion, high hardness, and strong scratch resistance. Additionally, it should possess outstanding weather resistance, scratch and abrasion resistance, gloss retention, and excellent resistance to gasoline, alcohol, acid, alkali, and salt spray.
13
0
Share

What car has a running horse as its logo?

The car with a running horse as its logo is the Ford Mustang. The Mustang is the first concept car developed by Ford, featuring a mid-engine, two-seater hardtop sports car design. Here are some relevant details about the Ford Mustang: 1. The name "Mustang" commemorates the legendary P-51 Mustang fighter aircraft used by the U.S. military during World War II. 2. The Mustang's appearance is simple and unadorned, yet it exudes a wild and unpretentious charm, with practicality being a standout feature. The front fascia appears somewhat conservative, not significantly different from ordinary sedans, lacking the aggressive look typical of sports cars. 3. The Mustang offers two engine options: a 2.3T and a 5.0L, both paired with a 10-speed automatic transmission. The maximum horsepower outputs are 299 hp and 466 hp, respectively, with maximum torques of 434 N·m and 556 N·m. Advanced powertrain technology allows the Mustang to achieve new performance levels using regular fuel. 4. The Mustang's signature design features, such as the long hood and short rear deck, have a 40-year history. Since the 1960s, other distinctive design elements include the C-shaped side air intakes, three-element taillights, and the galloping horse emblem centered on the grille.
5
1
Share

How to Reset the Maintenance Light on a Great Wall Haval H9?

Here is the method to reset the maintenance light on a Great Wall Haval H9: 1. First, press the vehicle's one-touch start button to start the engine. 2. Click the MODE button on the left side of the multifunction steering wheel. 3. Press and hold the OK button on the right side of the multifunction steering wheel until you hear a sound, then release. At this point, you will see that the vehicle's maintenance light has been reset. Here is some related information about the Great Wall Haval H9: 1. Powertrain: Offers a choice between a 2.0T gasoline engine and a 2.0T twin-turbo diesel engine. The 2.0T gasoline engine delivers a maximum output power of 185kW (251PS) and a peak torque of 355Nm, while the 2.0T twin-turbo diesel engine provides a maximum output power of 140kW (190PS) and a peak torque of 420Nm. All models are equipped with a ZF-8-speed automatic transmission and a four-wheel-drive system. 2. Features: The Haval H9 comes standard with electronic parking brake + auto hold, electronic gear shift, hill descent control, hill start assist, three-zone automatic air conditioning, and auto start-stop, among other technological configurations.
4
5
Share

What are the levels of autonomous driving in cars?

The purpose of the autonomous driving classification system is to supervise and manage the market. Currently, the classification system for autonomous driving is primarily composed of two organizations. The SAE autonomous driving classification ranges from L0 to L5, divided into six levels based on the degree of automation, from zero to full automation. L0 represents traditional driving systems without any autonomous driving features, while L1-L5 are classifications based on the configuration and maturity of autonomous driving technology. L1 level: Capable of assisting the driver in completing certain driving tasks, such as the Adaptive Cruise Control (ACC) function installed in many car models, which uses radar to control the distance between vehicles and adjust speed in real-time. This feature is widely applied in many domestic car models. L2 level: Can automatically complete certain driving tasks and, through processing and analysis, automatically adjust the vehicle's state. Features like Tesla's Lane Keeping Assist fall under this level, where besides controlling acceleration and deceleration, it can also manage steering. However, the driver must still monitor the surroundings to ensure safe vehicle operation. L3 level: At this level, the vehicle is controlled by a more logical driving computer, and the driver does not need to keep hands and feet ready. The vehicle can independently complete driving operations under specific conditions. However, the driver cannot sleep or rest and must take over when the artificial intelligence cannot make accurate judgments. The recently launched BMW X7 claims to have achieved autonomous driving at this technical level.
15
0
Share

What is the tire model specification of the Livina?

The Livina has two tire model specifications, which are 185/65r15 and 195/55r16. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. The Livina (LIVINA) is a compact car under Dongfeng Nissan, with body dimensions of 4178mm in length, 1690mm in width, 1565mm in height, and a wheelbase of 2600mm. The available body colors include Emerald Green, Sapphire Blue, Ivory White, Moonlight Silver, Rose Red, and Jade Black.
5
1
Share

Which country produces Mazda cars?

Mazda cars are produced in Japan, with the headquarters located in Hiroshima. The product lineup includes SUV series: CX-3, CX-30, CX-4, CX-5, CX-8, CX-9; sedan series: Mazda2, Mazda3, Mazda6; sports car: MX-5; and pickup truck BT-50. The Mazda CX-3 is a compact SUV model from Mazda, with body dimensions of 4275mm in length, 1765mm in width, and 1548mm in height, a wheelbase of 2570mm, and a 5-door, 5-seat SUV body structure. It is equipped with a 2.0L 148-horsepower L4 engine, paired with a 6-speed automatic manual transmission.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.