Where is the cabin air filter located in the Damai X7?

2 Answers
StAliyah
07/25/25 1:06pm
The cabin air filter in the Damai X7 is located inside the glove compartment on the front passenger side. After removing the glove compartment, you will see a rectangular box. Open this box to access the filter. The cabin air filter provides fresh air to the passenger compartment, preventing occupants from inhaling harmful gases and ensuring driving safety. The Damai X7 is a mid-size SUV under the Zotye brand, with dimensions of 4736mm in length, 1942mm in width, and 1672mm in height, and a wheelbase of 2850mm. The vehicle comes standard with features such as BOS (Brake Override System), EPB (Electronic Parking Brake), rear parking sensors, ambient interior lighting, one-touch start, keyless entry, rear air conditioning vents, and dual front airbags.
Was this review help?
20
5
Share
MacDonovan
08/11/25 8:37pm
When it comes to the location of the Damai X7's cabin air filter, I need to think back carefully. I usually enjoy tinkering with car parts, and I find this design quite common. The filter is typically hidden behind the glove compartment on the passenger side. You'll need to remove the screws or clips under the glove box, gently pull it open, and then you'll see a small cover plate. Unscrew it, and the filter slot will be exposed. This location is relatively user-friendly for DIY replacement since it doesn’t involve touching core components. The cabin air filter is extremely important—it filters out dust and odors, protecting the air quality inside the car. However, don’t take the Damai X7’s system too lightly. It’s recommended to check it every six months or 10,000 kilometers. If you notice a strong odor, the filter might be clogged and needs replacing. Remember to wear gloves during the process to avoid direct contact with dirt. In short, knowing its location can save you repair costs and improve driving comfort.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

How Wide is the Single Plank Bridge in the Motorcycle Test?

The width of the single plank bridge in the motorcycle test is 0.20m. Additionally, the height of the motorcycle bridge is 5cm. There are three types of motorcycle licenses: License D allows driving ordinary three-wheeled motorcycles and E; sidecars, Shifeng agricultural three-wheelers, and both regular and reverse three-wheelers are permitted. License E allows driving ordinary two-wheeled motorcycles and F, but it is strictly prohibited to ride a three-wheeler with an E license, as it constitutes a mismatch of the permitted vehicle type. License F allows driving lightweight motorcycles with a displacement of 50cc (commonly known as blue plate), but License F holders cannot drive D/E type vehicles. Motorcycle test subjects: Subject 1 is the examination of road traffic safety laws and regulations and related knowledge. Subject 2 is the training of field driving skills. Subject 3 is the training of road safety skills. Subject 4 is the theory of safe and civilized driving.
15
1
Share

Why Does a Tire Changer Damage Wheel Rims?

Tire changers can damage wheel rims due to incorrect disassembly direction. Introduction to Tire Changers: A tire changer, also known as a tire mounting machine, facilitates easier and smoother tire removal during automotive repairs. There are various types of tire changers, including pneumatic and hydraulic models, with pneumatic changers being the most commonly used. Structure of a Tire Changer: The structure of a tire changer consists of a main workbench, separation arm, inflation/deflation device, foot pedal, lubricating fluid, and compressed air interface. The inflation/deflation device primarily functions to release tire air for easier inflation or disassembly, and it includes a pressure gauge for measuring air pressure. The main workbench is where the tire is primarily disassembled, serving to position the tire and enable rotation.
12
5
Share

Can I Use Coating Agent on a New Car?

Yes, generally, paint coating agents can be applied to new cars. Long-lasting protection: Most products can last for about a year. Low cost: After applying the coating product, routine maintenance such as car washing will be reduced, saving both time and maintenance costs. High hardness: Since coating products form a high-hardness film on the car paint, they provide strong protection and effectively safeguard the paint. Enhanced appearance: After coating, a colorless transparent glass-like film is formed on the exterior of the car paint, making the paint look more glossy.
16
5
Share

Can Motorcycles Get Wet in the Rain?

Motorcycles can get wet in the rain. Avoid direct sunlight after rain exposure: It's okay for motorcycles to get a little wet in the rain, but it's advisable to have a rain cover ready to protect important components. After getting wet, place the motorcycle in a ventilated area to dry, avoiding direct sunlight. Plastic and metal parts on motorcycles are prone to aging, discoloration, and rust when exposed to sun and rain. Dry the motorcycle after rain exposure: After riding in the rain, make sure to dry the motorcycle's surface as much as possible. Dry the left and right handlebar switches, the chain, and the brake discs. Check the spark plug area for any accumulated water, as some motorcycle designs are prone to water accumulation in this area. Also, dry the engine cooling fins and exhaust pipe as much as possible.
9
0
Share

Are Steering Gears Universal?

Steering gears are universal. Introduction to Steering Gears: The steering gear assists the driver in applying force when turning the steering wheel, reducing the effort required during steering. It is mainly divided into rack-and-pinion steering and worm-and-sector steering. Currently, there are roughly three types of power steering systems on the market: electric power steering (EPS), rack-and-pinion hydraulic power steering, and electro-hydraulic power steering. Working Principle: Electric power steering activates the motor below the steering wheel when the driver turns it. The power steering system consists of a mechanical steering system with an additional power assist device. The steering oil pump is installed on the engine and driven by the crankshaft via a belt, outputting hydraulic fluid.
6
1
Share

What causes oil leakage from the installed fuel injector?

The reasons for oil leakage from the fuel injector may include dirty engine oil, excessive engine temperature, damaged gasket, low injection pressure, etc. Dirty engine oil: Unclean engine oil with impurities in the high-pressure oil pipe can cause the needle valve assembly to fail to close tightly, allowing high-pressure combustion gas to backflow and damage the needle valve assembly. Additionally, contaminants on components such as the injector pressure regulating spring and tappet can contribute to this issue. Excessive engine temperature: Poor cooling of the injector due to high engine temperature can lead to seizure of the fuel outlet valve assembly. Other contributing factors include delayed fuel supply timing, excessive scaling or blockage in the cooling water passages, wear on the water pump impeller end face, or prolonged engine overload. Damaged gasket: During fuel injector installation, missing or damaged gaskets can cause air leakage, resulting in localized overheating of the injector and subsequent seizure. Low injection pressure: Insufficient injection pressure can cause high-pressure combustion gas in the combustion chamber to backflow.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.