Where is the cabin air filter located in the Chevrolet Malibu?

2 Answers
DiAubree
07/24/25 12:00pm
The cabin air filter of the Chevrolet Malibu is located inside the glove compartment on the passenger side. It can be seen after removing the clips. Below is a detailed introduction about the Chevrolet Malibu: 1. Exterior: In terms of exterior, the Malibu adopts General Motors' wraparound design, with headlights featuring a combined high/low beam structure and xenon light source. 2. Powertrain: The 2.0L model is equipped with an all-aluminum engine, while the 2.4L model features a SIDI direct injection engine. There are plans to introduce a direct injection + turbocharged engine in the future, paired with a 6-speed automatic transmission. The Malibu will be powered by either a 2.0L or 2.4L SIDI direct injection naturally aspirated engine, both of which are also found in the Buick Regal, with maximum power outputs of 147 horsepower and 186 horsepower respectively.
Was this review help?
17
5
Share
Henry
08/11/25 6:09am
On the Chevrolet Malibu, the cabin air filter is typically located behind the large storage compartment (commonly referred to as the glove box) on the lower right side of the dashboard, in front of the front passenger seat. To access it, first open the glove box and carefully examine both sides of the bottom of the compartment for small plastic clips or screws. Gently press or unscrew these to remove the entire glove box. Looking behind it, you'll spot a rectangular cover; removing this reveals the hidden filter. The filter doesn't just trap dust and pollen—it also blocks odors from entering the cabin, which is crucial for health, especially for families with children. It's generally recommended to inspect it annually or every 15,000 kilometers. DIY replacement can save you hundreds in professional service fees, and the process is straightforward—just have a Phillips-head screwdriver handy. Before starting, turn off the AC power to prevent dust dispersion. Once done, the cabin air becomes noticeably fresher, making for more comfortable breathing while driving.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Can the original license plate be used after the car is transferred?

Can the original license plate be used after the car is transferred? Duration of vehicle transfer: It can be completed within one to two working days. Vehicle transfer refers to the change of ownership procedures for motor vehicles. After the transfer, you need to reselect the vehicle license plate, reissue the motor vehicle license, record the relevant information in the motor vehicle registration certificate, and also transfer the compulsory traffic insurance and commercial insurance of the vehicle. Vehicle transfer procedures: Vehicle license; motor vehicle registration certificate; motor vehicle registration supplementary form (obtained from the local vehicle management office of the vehicle's jurisdiction, with ID card, driving license, and road maintenance fee certificate); vehicle purchase tax certificate; ID cards and household registration books of both the buyer and seller. For non-local residents, a temporary residence permit is required, and the buyer's temporary residence permit must be valid for at least one year.
19
0
Share

What does the D gear mean?

The D gear stands for Drive, which is the gear used when driving forward. Introduction to D gear: The transmission will automatically shift between 1st gear and overdrive (equivalent to 1st to 4th gears) based on speed and throttle conditions. This gear is used for normal road driving. Due to different designs in various countries' vehicle models, the "D" gear generally includes gears from 1st to high gear or 2nd to high gear, and it will automatically shift based on changes in speed and load. Additional information about D gear: Since automatic transmissions determine the gear based on throttle position and vehicle speed, the shifting speed varies depending on how the accelerator pedal is operated. If the accelerator pedal is pressed down quickly when starting, the upshift will occur later, providing stronger acceleration. Once a certain speed is reached, quickly releasing the accelerator pedal will cause the car to upshift immediately, resulting in reduced engine noise and improved comfort.
2
4
Share

Where is the ambient temperature sensor located on Dayun heavy-duty trucks?

The ambient temperature sensor is located in front of the radiator or in front of the vehicle's bumper. Function of the ambient temperature sensor: The ambient temperature sensor is a device used to detect the ambient temperature around the vehicle. The control system compares the outside temperature with the interior temperature and then determines the control method. The ambient temperature sensor provides the ECU with the outside temperature signal, and the ECU uses this signal to regulate the interior temperature to meet the comfort needs of the occupants. Types of ambient temperature sensors: There are various types of ambient temperature sensors. Based on the measurement method, they can be divided into contact and non-contact types. According to the sensor material and electronic component characteristics, they are classified into thermistors and thermocouples. The ambient temperature sensor is a crucial component for controlling the interior temperature. Regular vehicle maintenance should be performed, and the condition of automotive components should be periodically inspected during normal vehicle use.
19
1
Share

Can Mr. Muscle Glass Cleaner Be Used as Automotive Glass Washer Fluid?

Cleaning the car windshield requires the use of automotive-specific glass washer fluid, and Mr. Muscle glass cleaner cannot be used as a substitute. Reasons why cleaner cannot be used: The cleaner can form scale deposits in the water reservoir and rubber pipes, affecting normal spray function. Additionally, when the cleaner is sprayed onto the windshield, exposure to wind and sunlight can also lead to scale formation. Prolonged use may increase friction between the glass surface and wiper blades, potentially causing irreparable scratches on the glass. Composition of glass washer fluid: Professional automotive glass washer fluid consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It offers functions such as dirt removal, antifreeze, anti-static properties, and corrosion prevention.
1
1
Share

What Causes the Engine to Overheat When Accelerating?

Engine overheating when accelerating is usually caused by air trapped in the radiator, which can be resolved by bleeding the air. Here are the methods to remove air from the radiator: Check the coolant: Open the engine compartment when the engine is cold and check if the coolant level is sufficient. The coolant reservoir has MAX and MIN level marks. If the level is below the MIN mark when the engine is cold, add coolant according to the marked levels on the reservoir. Idle circulation: Drain the old antifreeze and flush the fluid channels with clean water. Let clean water continuously flow through the engine cooling system, then start the engine and let it idle for 3 to 5 minutes to circulate the water. Continue adding clean water until the water flowing out is clear.
17
1
Share

Where is the vehicle inspection location in Langfang?

Vehicle inspection in Langfang is located in the Industrial Park of Yongqing County, Langfang City. Annual inspection for small vehicles: Family-owned small vehicles with 7 seats or less (including 7 seats) are exempt from on-site testing within 6 years from the date of purchase, but it is necessary to collect the annual inspection sticker and environmental protection sticker from the vehicle management office every two years. After 6 years, an annual inspection is required. Annual inspection for vehicles over 15 years old: They need to be inspected twice a year. If the mileage exceeds 500,000 kilometers, the inspection frequency increases to four times a year. Importance of vehicle annual inspection: Relevant authorities have always placed great emphasis on this, and the regulations are particularly strict. Vehicles that fail to meet the standards must be scrapped directly according to the regulations. For vehicles that have been in use for over 15 years, there are more potential safety hazards. The twice-a-year inspection is designed to identify existing problems with the vehicle and also considers the safety of the vehicle owner.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.