Where is the cabin air filter located in the Chevrolet Captiva?

2 Answers
OLyla
07/24/25 12:56pm
The cabin air filter in the Chevrolet Captiva is located inside the glove compartment on the passenger side. Simply open the glove compartment to access it. The cabin air filter is a component installed in the car's air conditioning system that absorbs dust particles, reduces respiratory discomfort, minimizes irritation for allergy sufferers, and protects the air conditioning cooling system. The Captiva is a mid-size SUV under the Chevrolet brand, with dimensions of 4690mm in length, 1849mm in width, and 1753mm in height, and a wheelbase of 2707mm. It has a maximum power output of 123kW and a maximum torque of 230Nm. The Captiva features an automatic transmission with manual mode, an L-type cylinder arrangement, a naturally aspirated intake system, MacPherson strut front suspension, and a four-link rear suspension. Available body colors include Gobi Gray, Lightning White, Star Silver, Wild Black, and Sun Chaser Red.
Was this review help?
5
1
Share
RicardoFitz
08/11/25 7:01am
I've been driving a Captiva for many years, and the cabin air filter is located behind the glove compartment in front of the passenger seat. You'll need to open the glove box first, then squeeze the clips on both sides to completely remove it, revealing a small cover plate. Open the cover, and you'll find the filter snugly fitted inside. Remember to check it regularly—it's best to replace it every six months or a year, especially in humid weather when it's prone to mold, which can affect airflow and air quality. If you're feeling a bit lazy to do it yourself, buying the right model online is very cheap and takes just ten minutes—don't wait until you smell something funky in the car to regret it. Paying attention to this regularly keeps your car healthier and more worry-free to drive.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

How to Replace a Car Horn?

The first task is to locate the horn, which may be under the hood at the front of the vehicle, around the battery, or in the area between the inner and outer fenders. Loosen the small bolts securing the horn, remove the horn, and then replace it with a new one purchased from a vehicle parts dealer or an aftermarket repair shop. Install it in the original position and connect the wiring to the vehicle's battery. You may mount a universal horn or use self-tapping screws to install it in a suitable location. Finally, turn on the vehicle's power and test the sound effect of the new horn.
5
0
Share

How to Replace the Battery in an Electronic Key?

Purchase the original battery for the car key, ensuring the voltage and model are the same. Remove the mechanical key. Most mechanical keys require pressing a small button before they can be pulled out. Use a small flat-head screwdriver to pry open the car key. There will be a small gap in the middle of the key; gently twist to pry it open. Pry out the old battery, install the new one, and then reassemble the car key.
12
4
Share

What to Do When the Car Roof Lining Falls Off?

Use roof lining-specific glue, apply it along the fallen edge, and once the glue dries and hardens, it will bond. Choose clips of a similar color and nail them back in place, or use a syringe to inject glue for adhesion. Remove the entire roof lining, prepare a new piece of roof lining fabric, spray glue on both the car roof and the inner side of the lining, and then bond them together.
17
0
Share

How to Deal with Scratches on Blue Car Paint?

First, clean the scratched area with water and dry it with a clean towel. Apply a small amount of toothpaste to a sponge and rub it on the scratch in a clockwise or counterclockwise motion. Evenly apply polishing wax to the blue car paint, wait for 10 minutes, and then wipe it off.
12
3
Share

How to reset the tire pressure on an Infiniti Q50?

Before resetting the tire pressure, it is essential to check the tire pressure condition of the vehicle to ensure it is within the normal range. The automatic tire pressure adjustment function can automatically correct and reset the tire pressure. Once the vehicle's tire pressure has been confirmed, you can visit an automotive service center to have the tire pressure sensors inspected and clear any corresponding fault codes.
1
4
Share

What to Do If You Don't Want the Self-Selected License Plate Number Anymore?

You can go to the vehicle management office to reselect. You can only wait for the original self-selected number to expire and become invalid (usually 7-15 days), and then reselect, but you cannot choose the previous number again. If you are not satisfied with the self-selected license plate online, you can log in to the online self-selected license plate system again after 3 working days to choose a satisfactory license plate online.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.