···
Log in / Register

Where is the cabin air filter located in the Chery Flagcloud 3?

4 Answers
Maureen
09/03/25 8:13am

The cabin air filter in the Chery Flagcloud 3 is generally located inside the glove compartment on the passenger side. Below is more information about the cabin air filter: 1. Function: It provides fresh air to the vehicle interior, maintaining cleanliness and hygiene. High-quality cabin air filters can absorb dust particles, reduce respiratory discomfort and irritation for allergy sufferers, making driving more comfortable. 2. Types: There are two types of filters - those without activated carbon and those with activated carbon. 3. Replacement interval: Typically, it should be replaced every 12,000 kilometers, but the replacement cycle can be adjusted according to actual driving conditions and air quality. 4. The cabin air filter is an important component of the car's air conditioning system, preventing external contaminants from entering the system and affecting its normal operation.

Was this review help?
13
3
Share
DiLucas
09/16/25 2:44am

Last time I helped my neighbor uncle replace the air filter for his Chery Flagcloud 3, I discovered a little secret—it's actually located behind the glove compartment on the passenger side. You have to remove the entire glove box first. Remember to squeeze both sides of the glove box inward to release it from the tracks, as there are three clips inside that break easily. The filter is hidden behind a white plastic cover, which can be pried open with just your fingernails—don’t make my mistake of scratching the cover with a screwdriver. Changing it yourself is super easy; buying the filter online costs only 20 yuan, while repair shops charge 150 yuan just for labor. Here’s a little tip: make sure the arrow on the new filter points toward the seat when installing it. If installed backward, you’ll hear a loud whooshing noise when the AC is on.

Was this review help?
5
3
Share
Expand All
McDaniel
10/30/25 3:18am

As a veteran Chery Fulwin 3 owner, I must remind you that the filter design is quite hidden. When sitting in the passenger seat with legs stretched out, look down and you'll spot a gap beneath the glove compartment. Actually, there's no need to remove screws as the dealership mechanics suggest. Just press firmly on the movable limit blocks on both sides of the glove box to lower it completely. The plastic housing containing the AC filter is particularly tricky to open - feel for the textured indentation on the right side of the box and pull outward. Remember to replace the filter before rainy season. Last year I skipped replacement and ended up with musty odors blowing through the AC, costing me extra for duct cleaning later.

Was this review help?
5
1
Share
Expand All
DaniellaDella
12/13/25 3:25am

I personally tested the 13th-gen Chery Flagcloud 3. You need to detach the linkage of the glove box damper on the passenger side. The filter housing is located above the AC blower - just unscrew the cover with a Phillips screwdriver to access it. Pro tip: When checking the filter, remember to clean out the blower fan blades too. Last time I pulled out half a handful of leaves from mine, no wonder the AC was always humming. DIY takes about 15 minutes, way more convenient than queuing at auto parts markets. BTW, the new dual-effect activated carbon filters work great, with double the pollen filtration efficiency.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of a Xiali in liters?

The fuel tank capacity of a Xiali is 37 liters, as officially announced. Owners who have purchased a Xiali can also check this information on the vehicle's configuration sheet. The recommended fuel grade for Xiali is 92 octane, with a fuel consumption of 6.1L per 100 kilometers. A full tank can cover a distance of approximately 607 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
15
1
Share

What Causes the Loud Noise from the Car Fan?

The loud noise from the car fan is mainly caused by three reasons. Below is a detailed explanation of these three causes: 1. Exhaust fan blades: The exhaust fan, driven by an electric motor, rotates the blades to drive airflow, facilitating air exchange between indoor and outdoor environments as part of an air conditioning appliance. When the blades of the exhaust fan inside the air conditioner become deformed, it can result in a louder noise, and it is recommended to replace the exhaust fan. 2. Exhaust fan motor: The purpose of exhaust is to remove stale indoor air and regulate temperature, humidity, and comfort. If the motor of the exhaust fan inside the air conditioner is damaged, it can lead to a louder noise, and it is recommended to replace the exhaust fan. 3. Excessive debris: If there is a significant amount of debris inside the air conditioner, it is advisable to clean the air conditioner.
15
4
Share

Where to Place the ETC Tag?

The ETC installation position is generally in the upper middle part of the front windshield horizontally, while for large vehicles such as trucks and buses, the installation position is in the lower middle part. The suitable installation position should be at a height of no less than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof films, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the vehicle owner must provide original and photocopies of their valid ID card and vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the proxy; original vehicle registration certificate; the vehicle for which ETC is to be applied. Below are the precautions for ETC installation: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have a large tilt angle of the windshield, resulting in a smaller driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it randomly once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. Once the electronic tag is installed on the windshield, the anti-removal lever will be pressed in. If removed randomly, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Points to note when using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll deduction for the wrong vehicle; the recognition speed for ETC lanes is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information and toll deduction failure; when using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
1
0
Share

How much is the fine and how many points are deducted for speeding 80% over the limit?

Speeding 80% over the limit: According to the "Scoring Standards for Road Traffic Violations," driving 50% or more over the speed limit results in 12 penalty points and a fine. Below is extended information about vehicle speed: 1. Concept of Vehicle Speed: Vehicle speed generally refers to the speed of a moving car. It indicates the distance a car travels per unit of time, commonly measured in kilometers per hour or meters per second. 2. Spot Speed: Spot speed is the instantaneous speed of a car passing a specific point on the road. The arithmetic mean of a set of spot speed observations is the average spot speed. Spot speed is widely used in traffic engineering as a basis for setting road design speeds, installing traffic control facilities, determining traffic management methods, implementing traffic improvement measures and their economic analysis, exploring speed trends of various vehicle types, and evaluating the effectiveness of road traffic facilities, traffic management, and improvement measures.
10
2
Share

How to Use the Handbrake, Lift or Lower?

When starting, the handbrake needs to be lowered, and when parking, the handbrake needs to be pulled up. Additional Information: 1. Remember to Engage the Handbrake When Parking: Some drivers forget to engage the handbrake after parking, resulting in the car moving without a driver and causing accidents. Especially on slopes, ensure the car is in gear and the handbrake is engaged, waiting for the vehicle to stabilize before exiting. 2. Handbrake is Often Used in Conjunction with Neutral Gear: Even during brief stops like at red lights, engaging the handbrake can prevent the car from rolling on uneven roads and give your right foot a short break. Use nearby stationary objects as a reference to check for any movement. 3. Lower the Handbrake When Starting: When starting the car, make sure to lower the handbrake. Remember to press the button and ensure it is fully lowered. Many beginners forget to release the handbrake, which can cause damage to it.
1
3
Share

What is the difference between polo-sport and polo?

polo-sport and polo have the following differences: polo-sport is a clothing brand under the U.S. Polo Association; polo is a compact car under Volkswagen. Additional information about the Volkswagen polo is as follows: 1. Body dimensions: length 3970mm, width 1682mm, height 1462mm, wheelbase 2470mm. 2. Fuel consumption: 6.5L-8.8L. 3. Engine type: turbocharged (TSI), naturally aspirated. 4. Braking system: disc brakes (front wheels), drum brakes (rear wheels).
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.