Where is the cabin air filter located in the Cadillac ATS?

Is the Atenza from Changan or FAW?

Atenza is from FAW. Taking the Atenza 2021 2.0L Skyactiv-G Fashion Edition as an example: The manufacturer of this car is FAW Mazda, classified as a mid-size car, with a gasoline energy type, a 6-speed automatic transmission, and a 4-door 5-seater sedan body type. It has a top speed of 212 km/h and a naturally aspirated intake form. The car's dimensions are 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm. The intake form is naturally aspirated, the drive type is front-wheel drive, the front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.

6

4

Share

How to Match the Tire Pressure Sensor on Ford Edge?

Ford Edge tire pressure sensor matching method is: 1. Turn on the ignition switch; 2. Navigate to the tire pressure reset interface through the control information display; 3. Press and hold the OK button until the confirmation message appears. Taking the 2021 PLUSEcoBoost245 two-wheel drive base model 5-seater as an example: The manufacturer of this car is Changan Ford, the level is mid-size SUV, and the energy type is gasoline. The car's length, width, and height are 4878mm, 1925mm, and 1734mm respectively, the wheelbase is 2850mm, the body type is a 5-door 5-seat SUV, the transmission is an 8-speed automatic, the intake form is turbocharged, and the drive method is front-wheel drive.

7

1

Share

How to Determine Intake Manifold Leakage?

To determine if there is an intake manifold leak, observe the following symptoms in the engine: elevated idle speed, difficulty starting, and weak acceleration. These signs indicate a potential intake manifold leak. The intake manifold is located between the throttle valve and the engine's intake valves. It is called a "manifold" because after air enters the throttle valve, it passes through the manifold buffer system, where the air flow paths diverge according to the number of engine cylinders, directing air into each cylinder. For port fuel injection engines or diesel engines, the intake manifold simply distributes clean air to each cylinder's intake port. The intake manifold must distribute the air-fuel mixture or clean air as evenly as possible to each cylinder. To achieve this, the length of the gas flow paths within the intake manifold should be as equal as possible.

15

0

Share

What is the fault when the EPC light is on in a Santana?

The illumination of the EPC light in a Santana indicates an electronic stability system fault. It is necessary to check whether the car's intake system has malfunctioned or if there are issues such as oil leakage or fuel blockage that need to be addressed and repaired. Taking the Santana 2021 1.5L Automatic Fashion Edition as an example: this car is manufactured by SAIC Volkswagen, classified as a compact car, with a gasoline energy type. The car's dimensions are 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. It features a naturally aspirated intake form, front-wheel drive, a front suspension type of MacPherson independent suspension, and a rear suspension type of compound torsion beam non-independent suspension.

13

5

Share

How to reset the maintenance light on Geely S1?

To reset the maintenance light on the Geely S1, follow these steps: 1. Turn off the ignition switch; 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 3. After the ignition switch has been on for about 3 seconds, release both arrow buttons; 4. The display will then show the maintenance menu, asking if you want to reset; 5. Press and hold the SET (reset) button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch to complete the reset. Taking the 2019 Geely Vision S1 Upgrade 1.5L Manual Happiness Edition as an example: This car is manufactured by Geely Auto, classified as a compact SUV, with a gasoline energy type, a 5-speed manual transmission, and a 5-door, 5-seat SUV body type.

4

2

Share

What does info mean on a car?

Info on a car refers to information notifications, which provide feedback on all vehicle information. When the info button is pressed, the central control display or the information screen on the dashboard will show vehicle-related information such as tire pressure, remaining range, engine oil, fuel consumption, and outside temperature. The information is displayed in a cycle, and pressing the button multiple times allows access to most of the vehicle's information. The info button on the multifunction steering wheel is particularly practical, as it enables the driver to access all vehicle information without distraction while driving. It is useful for checking tire pressure before getting in the car or before entering the highway.

4

5

Share

Where is the cabin air filter located in the Cadillac ATS?

Is the Atenza from Changan or FAW?

How to Match the Tire Pressure Sensor on Ford Edge?

How to Determine Intake Manifold Leakage?

What is the fault when the EPC light is on in a Santana?

How to reset the maintenance light on Geely S1?

What does info mean on a car?

How to Determine if a Car's Steering Knuckle is Damaged?

Is It Normal for a Wet Dual-Clutch Transmission to Make a Click Sound When Downshifting?

Is the loud clicking sound when shifting to P gear a sign of damage?

Is the BMW i8 Electric or Gas-Powered?