Where is the cabin air filter located in the C3XR?

How to Lock a Keyless Start Car?

Close the car doors and touch the sensing area on the outside of the door. The turn signals will flash once, indicating that the vehicle is locked. Here is more information about the keyless entry system: 1. Keyless entry does not mean you can enter without a key, but rather that you don't need to use a traditional mechanical key to insert into the door lock to open the door. 2. The keyless entry system utilizes the world's advanced RFID (Radio Frequency Identification) technology and an advanced vehicle identity coding recognition system. It combines the remote control system and the keyless system, while maintaining the traditional vehicle circuit protection, truly achieving a dual RF system and dual anti-theft protection, providing maximum convenience and safety for car owners.

14

1

Share

What are the engine sensors?

Engine sensors include the air flow sensor, intake pressure sensor, and engine speed (CMP) camshaft position sensor. Below is an introduction to the related information about sensors: 1. Features: The characteristics of sensors include miniaturization, digitization, intelligence, multifunctionality, systematization, and networking. 2. Main classifications: By application, they are divided into pressure and force-sensitive sensors, position sensors, liquid level sensors, energy consumption sensors, speed sensors, acceleration sensors, radiation sensors, and thermal sensors. By principle, they are divided into vibration sensors, humidity sensors, magnetic sensors, gas sensors, vacuum sensors, biosensors, etc.

12

1

Share

What is the wheelbase of the BYD e6?

The wheelbase of the BYD e6 is 2830 mm. This is a pure electric MPV model, with dimensions of 4560 mm in length, 1822 mm in width, and 1630 mm in height. The BYD e6 is a single-motor model, with its motor delivering a maximum power of 120 kW and a maximum torque of 450 Nm. The BYD e6 can reach a speed of over 160 km/h, with an energy consumption of approximately 20 kWh per 100 km, equivalent to one-third to one-fourth of the fuel cost of a conventional gasoline vehicle. The front suspension of the BYD e6 uses a double-wishbone independent suspension, while the rear suspension employs a double-wishbone independent suspension.

4

Share

How to Perform Car Glaze Sealing?

Car glaze sealing involves the following steps: 1. Clean the car body: Thoroughly wash the car body, ensuring no dirt remains. Residue can cause friction and damage the paint when wiping the car, potentially harming its gloss. 2. Use masking tape (painter's tape) to cover all rubber parts on the car body. If there are plastic guards, use newspapers or similar materials to shield them to prevent glaze from sticking and making cleanup difficult. 3. Apply the glaze: Pour the glaze onto the car body and use a glaze sealing machine to evenly apply it from front to back. After the glaze has fully penetrated and dried on the paint surface, wipe it clean with a non-woven cloth (remember to wipe in straight motions, not circular motions).

15

4

Share

What does the 'A' on a car represent?

The 'A' on a car represents the Auto Hold system. When this switch is activated, even if the vehicle is brought to a stop during driving, it will remain in the braking state and will not continue moving. The vehicle will only proceed when the accelerator is pressed again. Auto Hold refers to an automatic braking function. Once enabled, for example, when stopping at a traffic light, it eliminates the need to pull the handbrake. The working principle of Auto Hold: The vehicle's ECU computer uses sensors installed on the car to detect the body's level and wheel torque, determining whether braking is necessary to prevent rolling. The braking force applied to the wheels is not excessive, just enough to stop the vehicle from moving, ensuring that when the accelerator is pressed again, there is no severe jerking forward.

5

0

Share

What are the symptoms of a damaged carbon canister solenoid valve?

The carbon canister solenoid valve is responsible for regulating the flow of gasoline vapor from the carbon canister into the engine for combustion, functioning essentially as a switch. The symptoms of a damaged carbon canister solenoid valve include: 1. Difficulty starting the engine, with a high likelihood of stalling. Frequent need for a second attempt to start, and the engine is prone to stalling again shortly after starting. 2. Unusual noises while driving. Specifically, a "clicking" sound can sometimes be heard when the engine is not idling. 3. Increased fuel consumption, accompanied by a strong gasoline odor inside the vehicle. 4. Erratic engine idle speed and poor acceleration. After the engine starts, the idle speed fluctuates rhythmically, and the vehicle exhibits weak acceleration.

15

1

Share

Where is the cabin air filter located in the C3XR?

How to Lock a Keyless Start Car?

What are the engine sensors?

What is the wheelbase of the BYD e6?

How to Perform Car Glaze Sealing?

What does the 'A' on a car represent?

What are the symptoms of a damaged carbon canister solenoid valve?

How to Start the Engine?

What does the water tap symbol on a car mean?

What transmission does the Changan UNI-T use?

How long can you park on a yellow dashed line?