···
Log in / Register

Where is the cabin air filter located in the Buick GL8?

4 Answers
ElliotLee
08/27/25 7:41am
The cabin air filter of the Buick GL8 is located under the glove compartment on the passenger side. The replacement method for the Buick GL8 cabin air filter is as follows: 1. Remove the screws of the cover plate under the glove compartment; 2. Take off the cover plate and replace the filter cover. Taking the 2021 Buick GL8 as an example, its body dimensions are: length 5219mm, width 1878mm, height 1805mm, with a wheelbase of 3088mm. The 2021 Buick GL8 features a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, maximum power of 174kW, and maximum torque of 350Nm, paired with a 9-speed automatic manual transmission.
Was this review help?
11
0
Share
StGabriella
09/09/25 6:25am
I've been using my GL8 for several years and have replaced the cabin air filter multiple times. It's located behind the glove compartment on the passenger side. You'll need to remove the entire glove box to access it - first empty the contents, then squeeze both sides inward to release the retaining clips. After removing the glove box, you'll see a rectangular plastic cover. Press the clips and pry open the cover to reveal the thin, elongated black filter inside. Remember that the filter has directional markings - the arrow must point downward during installation. Installing it backward will affect airflow. It's actually quite simple to replace it yourself. I always buy Mann filters online and replace them myself, saving 200-300 yuan compared to dealership prices.
Was this review help?
17
4
Share
Expand All
WalterLynn
10/23/25 7:17am
Last time during maintenance, the technician showed me the location of the GL8's cabin air filter. It's indeed behind the glove compartment on the passenger side. Before starting, empty the glove box and press both sides simultaneously to completely release the hooks. After removal, you'll see a white panel at the back - gently unclip the fasteners to reveal the filter. My 2020 model uses a square activated carbon filter measuring approximately 28x20cm. It's recommended to replace it every 15,000 km, otherwise leaves and dust will accumulate, causing a musty smell when the AC is on. Wear gloves during DIY replacement as the plastic edges can be sharp.
Was this review help?
11
3
Share
Expand All
LaElliana
12/06/25 7:41am
My MPV is the GL8, and the cabin air filter is located behind the glove compartment on the passenger side. To access it, open the glove box and firmly squeeze both sides inward to remove the entire unit. Look for the square plastic cover at the back, unclip it to take out the old filter. Remember to align the new filter correctly with the arrow indicator. I usually stock up on filters, buying ones with PM2.5 filtration online for around 30 yuan. It's essential to replace them before the rainy season to prevent bacterial growth. For first-timers, searching for a video tutorial by model and year can help you complete the job in about ten minutes.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What causes ABS to fail when braking on rainy days?

ABS failing when braking on rainy days can be attributed to the following reasons: 1. Air in the brake lines: Brake fluid is the medium for transmitting force in the braking system. If air enters the brake lines, the brake fluid under high pressure will appear insufficient in force, and although there is still braking force, the maximum braking force is significantly weakened. In this case, the braking system should be promptly bled at a repair shop. 2. Brake fluid not replaced for a long time: If brake fluid is not replaced in time, it will contain excessive impurities and moisture, which will affect the transmission of braking force. Therefore, brake fluid must be replaced regularly, and if possible, a moisture content test should be conducted at a repair shop. 3. Oil leakage or overly soft brake material: Generally, oil leakage from the brake master cylinder or brake lines will cause the vehicle's brakes to feel soft. If the brake material is too soft, its high-temperature stability will be poor, which can also result in soft brakes.
14
0
Share

Where is the front spoiler located on a car?

The front spoiler is located beneath the front air deflector of a car. To reduce the lift generated during high-speed driving, automotive designers have made improvements not only in the car's exterior design—tilting the entire body forward and downward to create downward pressure on the front wheels, flattening the rear to minimize negative air pressure acting from the roof toward the rear and preventing the rear wheels from lifting—but also by installing a downward-sloping connecting panel below the front bumper. Here are some additional details: 1. By operation method: Transmissions are divided into manual transmissions and automatic transmissions. 2. By layout: Transmissions are categorized into fixed-axis transmissions and rotating-axis (planetary) transmissions. 3. By shifting effect: Transmissions are classified into stepped transmissions and continuously variable transmissions. 4. By shifting method: Transmissions include mechanical transmissions, hydraulic transmissions, and electric drive transmissions, among others.
17
5
Share

Where to Inflate Car Tires?

You can inflate your car tires at an auto repair shop, where professionals can also inspect the tires; nearby gas stations usually have tire inflation equipment as well; additionally, most car washes are equipped with air pumps for tire inflation, often offered for free. When inflating tires, safety is crucial. Use a pressure gauge to monitor the tire pressure while inflating to avoid overinflation, which can lead to tire bursts. If you need to inflate tires due to low pressure while driving, first find a safe place to park and turn off the engine. Wait for the tires to cool down before inflating, as high temperatures can increase tire pressure. Drivers should always monitor their tire pressure. Both underinflation and overinflation can compromise driving safety. Normal tire pressure should be maintained between 2.4bar and 2.5bar. For vehicles without a pressure gauge, you can check by counting the tire treads in contact with the ground: four treads indicate normal pressure, more than four indicate underinflation, and fewer than four indicate overinflation. Generally, tire pressure above 2.8bar is considered too high, and below 2.0bar is too low. Hazards of overinflation: Reduced tire friction and adhesion, affecting braking performance; increased steering wheel vibration and deviation, lowering driving comfort; accelerated wear on the central tread, shortening tire lifespan; increased vehicle vibration, indirectly affecting other components; excessive stretching of tire cords, reducing elasticity and increasing driving load. Hazards of underinflation: Increased friction with the road surface, leading to higher fuel consumption; heavier steering and potential deviation, compromising safety; excessive movement and rolling of tire parts, causing abnormal heat; weakened cord and rubber functions, leading to delamination or cord breakage, and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplied friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength, which can cause tire bursts at high speeds.
6
0
Share

Will Insurance Cover Cars Flooded in Heavy Rain?

Insurance will cover the damages, but only if the commercial auto insurance includes vehicle damage coverage. If the owner has purchased vehicle damage insurance, they can receive compensation for damages to parts other than the engine after the car is flooded by heavy rain. If the owner has purchased both vehicle damage insurance and waterlogging insurance, the insurance company will cover all damages caused by flooding, including engine damage. Below are some precautions for driving in rainy weather: 1. Slow down: Regardless of the road width or condition, drive slowly in the rain, always pay attention to the distance between vehicles, and be prepared to take emergency measures. Visibility is low in rainy weather, and the vehicle's braking distance and other emergency performance may be reduced, so slow down in advance to allow enough time and space to handle situations safely. 2. Maintain distance: Driving in the rain can obstruct your vision, so keep a safe distance from other vehicles and always monitor the distance between cars. Stay especially far from large vehicles, as they can block your view and may pass through water that smaller cars cannot, while also splashing water that can interfere with smaller vehicles.
15
0
Share

Where is the most suitable location to place car decorations?

Car decorations can be hung on the central rearview mirror inside the vehicle or placed on the dashboard. However, it is important to note that when placing car decorations or ornaments, they must not obstruct the driver's line of sight, as this could easily create safety hazards. Regulations regarding car decorations: 1. "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Article 62, Clause 2 stipulates that when driving a motor vehicle, the following behaviors are prohibited: hanging or placing items within the front and rear windows of the motor vehicle's cab that obstruct the driver's line of sight. 2. Regarding the act of hanging ornaments and placing decorations inside the vehicle: traffic police mostly focus on education, with penalties being rare. Traffic police generally make judgments based on visual inspection and will handle the situation differently depending on the severity. 3. Extra-large plush toys should be kept away from the glass: extra-large plush toys, cushions, and similar items should also be kept away from the windshield to avoid affecting the driver's observation of surrounding road conditions.
12
1
Share

What is the reason for the Buick GL8 hazard lights flashing continuously?

If the hazard lights of a car keep flashing continuously, it is most likely due to an issue with the control box. It is necessary to check whether the hazard light relay is functioning properly. Use a multimeter to directly measure the output line of the hazard light relay to see if there is a 12v output. Below are specific details about hazard lights: 1. Introduction: Car hazard lights, commonly known as car emergency flashers, involve both turn signals flashing together. There is a button with a red triangle on the vehicle's dashboard; pressing it will turn on the hazard lights. For some compact cars, the hazard light switch is located on the front part of the steering column near the steering wheel, where there is a small red column. Lifting this small column will activate the hazard lights. 2. Function: Primarily used to alert other vehicles during emergency stops. For example, if the vehicle breaks down or is involved in an accident, parking by the roadside with hazard lights on warns other vehicles to avoid secondary accidents. In conditions like fog, heavy rain, or other situations with poor visibility, turning on the hazard lights makes the vehicle more easily recognizable by others.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.