···
Log in / Register

Where is the cabin air filter located in the BMW 5 Series?

4 Answers
VonMelanie
07/29/25 12:17pm
The cabin air filter in the BMW 5 Series is located in the engine compartment, adjacent to the hood support rod. The recommended replacement interval for the cabin air filter is every 10,000 kilometers or six months. In areas with severe haze conditions, it is advisable to replace the filter every three months. The replacement cycle should be determined based on the external environment. The BMW 5 Series is a premium sedan with body dimensions of 4998mm in length, 1901mm in width, and 1559mm in height. In terms of powertrain, the BMW 5 Series is equipped with a 3.0-liter inline six-cylinder turbocharged engine, delivering a maximum power output of 225 kW and a peak torque of 400 Nm. The engine reaches its maximum power at 5800-6000 rpm and achieves peak torque between 1200-5000 rpm.
Was this review help?
17
0
Share
DelRuby
08/13/25 10:55pm
As someone who enjoys tinkering with cars, I find the location of the BMW 5 Series' cabin air filter quite convenient—it's mainly located behind the glove compartment on the passenger side. You'll need to open the glove compartment, clear out any items inside, then press the plastic clips on both sides to let the glove compartment hang down. At this point, you'll see a small rectangular chamber or cover. Gently open it, and the cabin air filter will be revealed. The position isn't deep or hard to find, making it a time- and cost-saving DIY job. Just remember to turn off the AC power before operating to prevent dust from blowing into the car. It's generally best to replace it every 10,000–20,000 km or once a year, as a dirty filter can restrict airflow, reduce cooling efficiency, and even cause musty odors.
Was this review help?
20
0
Share
Expand All
DeNova
10/09/25 2:53am
I've been driving this car for a while, and the air vents on my BMW 5 Series became smaller once. After checking myself, I found the filter is located behind the glove compartment on the passenger side. The operation is simple: open the glove compartment, reach inside and push the clip inward, then the glove compartment will lower, revealing the gray box. Unscrew the cover and you'll see the filter. The location is quite straightforward. I've replaced it twice, spending less than 50 yuan each time for parts, saving the hassle of going to a repair shop. However, I recommend beginners not to use too much force as plastic parts are fragile. Maintaining clean air makes driving more comfortable, especially during pollen season when frequent replacement is needed.
Was this review help?
12
4
Share
Expand All
McJune
11/22/25 4:09am
I pay great attention to driving health. The cabin air filter of the BMW 5 Series is generally located behind the glove box on the passenger side. You can remove it for inspection by pressing the clips on both sides. The location is clear and easy to find, but it needs to be replaced regularly, with a check recommended every 10,000 kilometers. A dirty filter accumulates dust and bacteria, deteriorating the air quality inside the car, which can lead to breathing difficulties or allergies and affect driving concentration. Paying attention to this during regular maintenance can enhance overall comfort.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the horsepower of the Wrangler's engine?

The maximum power output of the engine in the Wrangler is 226 horsepower. Here are some additional details about the Wrangler: 1. The Wrangler is a mid-size SUV produced by Jeep. 2. Powertrain: This vehicle is available with one powertrain option, featuring a 2.0T turbocharged engine. This engine delivers a maximum power of 195.4 kW and a maximum torque of 400 Nm. 3. The vehicle features a body-on-frame design: The overall design of the car is quite boxy, with the iconic seven-slot grille on the front fascia retained. It also incorporates chrome accents for decoration, and the front fascia details have been upgraded, blending classic elements with modern technology.
17
1
Share

How to Replace the Air Filter?

How to replace the air filter: 1. Locate the air filter position. If unsure, refer to the vehicle's user manual. 2. Before opening the air filter plastic cover, determine whether it is secured by screws or clips. 3. Remove the plastic cover of the air filter, take out the filter, and note the orientation of the air filter's top side. Then, clean the inside and outside of the air filter housing with a clean cloth. 4. Install the new air filter in its original position, ensuring the correct orientation of its front and back sides.
6
5
Share

What does the AC button in a car represent?

Car's AC button represents the air conditioning switch. Here are some introductions about the AC button: 1. The AC button in a car is the air conditioning switch. When this button is pressed, the car will automatically turn on the cooling system, and you will feel cold air blowing out. When we press this button, the car's cooling system starts operating. 2. There is an indicator light below the AC button in a car. When the light is on, it indicates that the switch has been activated. The car's AC button is equivalent to a button on a home air conditioner remote control, with the purpose of expelling the heat inside the car to the outside through air conditioning or ventilation.
13
0
Share

What Are the Precautions for Turning a Car?

Here are four key precautions for turning a car: 1. Use turn signals: Always activate your turn signals when turning; otherwise, drivers behind you may misjudge your actions, leading to unnecessary accidents or injuries. 2. Avoid sudden steering: Reduce speed when turning and steer smoothly to prevent skidding caused by excessive centrifugal force. 3. Do not coast into turns: In neutral gear, the engine cannot regulate wheel speed, causing the car to move solely by inertia. This significantly reduces the effectiveness of braking and steering, increasing safety risks. 4. Take wide left turns: To avoid obstruction or collision, turn as far as possible toward the intended direction.
13
5
Share

How to Use the Auto Start-Stop Function in Cars?

Here's how to use the auto start-stop function in cars: Once the car is started, the auto start-stop system is in normal working condition. When parking, shift to neutral, pull the handbrake, and release the clutch. After the system detects these three actions, it will automatically turn off the engine. When the clutch is pressed again, the engine will automatically restart. Below is some information about the auto start-stop function: 1. Engine auto start-stop: A system that automatically shuts off the engine when the vehicle comes to a temporary stop during driving and automatically restarts the engine when it's time to move forward again. 2. Auto start-stop English name: STOP&START, abbreviated as STT. The STT intelligent fuel-saving system is a system that controls the starting and stopping of the engine.
14
2
Share

What materials are brake pads made of?

Brake pads are made from a variety of materials, and the manufacturing materials are not fixed. However, there are mainly four types of materials: 1. Resin-based brake materials; 2. Powder metallurgy brake materials; 3. Carbon/carbon composite brake materials; 4. Ceramic-based brake materials. Below is a partial introduction to brake pads: 1. Automotive brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating, thereby guaranteeing quality. 2. Daily driving: Use the accelerator to control speed as much as possible to minimize the use of brakes, which can extend the lifespan of the brake pads.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.