···
Log in / Register

Where is the cabin air filter located in the BMW 3 Series?

4 Answers
VonPeyton
07/29/25 10:10pm

The cabin air filter in the BMW 3 Series is located inside the glove compartment on the passenger side. If you want to replace the cabin air filter, you need to remove the glove compartment. The cabin air filter is a component that requires regular replacement. If not replaced for a long time, it may affect the health of passengers in the car. It is recommended that owners replace the cabin air filter regularly during normal vehicle use. In terms of power, the BMW 3 Series is equipped with a 2.0T engine, paired with an 8-speed automatic transmission. For the exterior, the BMW 3 Series features sharp LED headlights connected to enlarged glossy black kidney grilles, complemented by front air intakes and three-dimensional lines. In terms of body dimensions, the BMW 3 Series measures 4734mm in length, 1811mm in width, and 1455mm in height, with a wheelbase of 2920mm.

Was this review help?
1
5
Share
Adriel
08/15/25 10:24pm

I remember once my BMW 330i's AC had a strange odor, so I decided to replace the filter myself. It's located on the passenger side, above the footwell area, roughly near the bottom of the glove compartment. Bend down and lift that thick soundproofing foam cover, and you'll see a small housing where the filter sits. Be careful when removing it – don't apply too much force or you might break the small clips. I'd recommend watching a year-specific video tutorial since designs vary slightly between models. After replacement, the air became much fresher, especially during spring when there's lots of pollen – it filters out many impurities. For safety, disconnect the battery negative terminal before starting to prevent accidental short circuits. The location is somewhat hidden, but once you're familiar with it, the next time will be much quicker, and you can save some money on dealership inspections.

Was this review help?
6
5
Share
Expand All
MargaretRose
10/17/25 8:05am

I learned about the location of the BMW 3 Series' cabin air filter from a friend, who said it's under the passenger seat. Later, I checked the owner's manual and confirmed it's in the footwell area, covered by a soft pad. I tried replacing it myself but found the space too tight—it's hard to even get my hand in there. Messing up the wiring would just add more trouble. I recommend taking it directly to a professional repair shop. The technicians know their way around and can get it done in minutes, plus they'll check the system's sealing. A dirty filter affects respiratory health, especially during long drives when there's more dust. Don't risk it to save a few bucks—regular replacement is good for the car's lifespan too. Generally, once a year is the most suitable interval.

Was this review help?
3
1
Share
Expand All
VanessaDella
12/01/25 2:01am

The BMW 3 Series cabin air filter is located under the passenger seat. Simply lift the carpet-like cover to access it. Quick steps: Remove the old filter, insert the new one with the arrow pointing in the airflow direction. Recommended replacement every 10,000 km to prevent musty odors. DIY replacement is convenient and cost-effective—just purchase the correct model online. Helps maintain clean cabin air.

Was this review help?
10
2
Share
Expand All
More Forum Discussions

Is the Hongqi HS5 compliant with China VI emission standards?

Hongqi HS5 meets the China VI emission standards. Here is relevant information: 1. China's sixth-stage motor vehicle pollutant emission standards refer to the standards established to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. 2. The early implementation of China VI standards will be divided into two phases. The first phase requires all light-duty diesel vehicles sold from July 1, 2018, to comply with China VI standards. 3. The second phase requires all light-duty gasoline vehicles sold from January 1, 2019, to comply with China VI standards. During these two phases, light-duty diesel and gasoline vehicles that do not meet the standards and are sold or transferred in Shenzhen will not be eligible for registration. Additionally, according to the notice, all vehicles transferred into Shenzhen from other regions must also strictly comply with China VI standards.
5
2
Share

How Many Months Define Inventory Vehicles?

Inventory vehicles are actually just a common term, their true meaning refers to new cars that have left the factory but remain unsold. Regarding the definition of inventory vehicles, there are no national regulations specifying how many months qualify a car as an inventory vehicle. However, the industry generally considers cars that have been in stock for over 3 months or half a year as inventory vehicles. Below is an introduction to inventory vehicles: 1. Introduction: The so-called 'inventory vehicle' lacks a clear legal definition, but the term indeed exists in the automotive sales industry, typically referring to cars that remain unsold for more than three months after leaving the factory. 2. Identification: Firstly, the manufacturing date is clearly stated on the vehicle's nameplate, and secondly, dealers do not conceal the identity of inventory vehicles because it's simply impossible to hide. 3. Handling: After cleaning a newly acquired inventory vehicle, if you find its paint surface still rough and dull, or even with many fine scratches, then considering waxing is advisable.
12
5
Share

How to Cancel the Maintenance Light on Tiggo 5?

Here is the method to reset the maintenance light for Tiggo 5: 1. Press and hold the instrument adjustment button, then turn on the ignition switch. 2. Continue holding the adjustment button for 3 seconds, then release it. The maintenance indicator light will automatically reset. Below is some related information: 1. The "SERVICE" sign on the dashboard display is the maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" sign on the display will flash. If the sign disappears after starting the engine, it indicates that the vehicle requires maintenance, and the maintenance light should be reset after servicing. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
13
4
Share

What is the minimum ground clearance of the Mercedes-Benz GLB chassis?

The minimum ground clearance of the UK Mercedes-Benz GLB is 123mm. Here is the relevant information: 1. Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as stones and tree stumps without collision. The smaller the ground clearance, the worse the ability to overcome obstacles. 2. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability. 3. The design of the minimum ground clearance must take into account the passability of loading and unloading platforms during transportation, and the possibility that the car will not scrape when approaching the edge of ordinary sidewalks. If the vehicle is intended for sale in a specific country or region, the local road quality must also be considered.
16
2
Share

How long does it take for the Haval H6 to automatically lock?

The Haval H6 can automatically lock if no door is opened within 30 seconds. The automatic locking feature of the Haval H6 does not need to be activated. After unlocking, if no door is opened within 30 seconds, the car will automatically lock. When the speed exceeds 15 kilometers per hour, the doors will automatically lock. Benefits of automatic door locking: If a car does not have an automatic locking feature, it can be installed at a 4S store. Automatic locking helps prevent theft by locking the doors once the car starts moving. It also effectively prevents sudden boarding during traffic jams or while waiting at traffic lights, providing a certain level of security. Pros and cons of the automatic locking feature: This feature can prevent mischievous children from opening the doors while the car is in motion. However, if the electronic device malfunctions, it can cause trouble. If passengers can open the doors manually, there won't be an issue. But if a passenger becomes unconscious or similar, it could create significant obstacles for rescue efforts and even cause harm during the rescue process.
5
1
Share

Can Baojun Change to a New Logo?

Baojun old cars cannot change to a new logo. Firstly, Baojun's new logo is mainly applied to more technologically advanced and intelligent high-end series models. Secondly, unauthorized logo replacement is illegal. Additionally, vehicles with altered logos will fail the annual inspection at the vehicle management office. Since models vary between brands, changing Baojun's logo to a new one may result in the vehicle being seized by traffic police. Below is relevant information: 1. The "Technical Conditions for Safe Operation of Motor Vehicles" clearly states that at least one permanently maintained trademark or manufacturer's logo should be installed in a visible location on the front exterior of the vehicle. Visible identification marks of the vehicle model should be installed on the exterior surfaces of the vehicle. The license plate should be fixed in a prominent and unaffected position, with its specific location indicated in the product usage manual. 2. According to the relevant provisions of the current "Regulations on Motor Vehicle Registration," owners who change the body color, model, performance, purpose, structure, replace the frame, body, or engine of a licensed motor vehicle must apply for a change of registration at the vehicle management office. Unauthorized actions such as changing the logo, adding a rear spoiler, modifying the vehicle's body kit, or altering the exhaust pipe are not permitted.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.