···
Log in / Register

Where is the cabin air filter located in the AX7?

4 Answers
SanNolan
07/30/25 1:09am

Dongfeng Fengshen AX7's cabin air filter is located inside the glove compartment on the passenger side. The replacement steps are as follows: 1. Method for replacing the cabin air filter in Dongfeng Fengshen AX7: Open the passenger door to access the glove compartment. Open the glove compartment and keep it in a suspended position. 2. Remove the fastening screws on the top and sides of the glove compartment: Then you can take out the glove compartment. 3. After removal, unplug the wiring harness connector: Remove the fastening screws of the cabin air filter, take off the cover to expose the filter, pull out the old filter by hand, and install the new cabin air filter.

Was this review help?
13
1
Share
StAnnie
08/15/25 6:42am

Oh, the AX7's cabin air filter is located behind the glove compartment on the passenger side, which is quite easy to find. I've changed it myself many times. You need to open the glove box first, then press the clips or hooks on both sides to completely remove the box. Once moved aside, you'll see a square or rectangular filter cover secured with screws or clips. Open the cover, and the old filter is clipped inside—just pull it out and replace it with a new one. The operation is simple, just requiring a regular screwdriver. Regular replacement is important; I usually change it every six months or every 10,000 kilometers. Otherwise, the air conditioning will blow out dusty air, accumulating bacteria that can affect health, especially in summer when the AC is used more frequently. The location is well-designed, unlike some cars where it's hidden in the engine bay, making it a hassle. AX7 owners can easily perform maintenance themselves, saving money. Just remember to buy a filter that matches the size—available online or at auto parts stores—and clean any debris around it during inspection to ensure a tight seal.

Was this review help?
15
5
Share
Expand All
KeeganFitz
10/20/25 5:29am

Regarding the location of the AX7's cabin air filter, it's situated behind the glove compartment on the passenger side. I was a bit confused the first time I changed it, but later found out by checking the manual. First, open the glove compartment, then locate the small buttons or clips on both sides of the compartment. Press them firmly while pulling the compartment outward, and the entire unit will come off. The filter housing is hidden inside, usually secured with screws—just unscrew the cover to replace the filter. Beginners might find it complicated, but the actual operation takes just a minute or two. If you don't replace it, the AC can develop a strong odor—my car had a musty smell, which disappeared immediately after replacement. The location is hidden but easy to access, showcasing the AX7's user-friendly design. It's recommended to check it every 5,000 kilometers to prevent dust and leaves from clogging and affecting cooling efficiency. DIY maintenance costs just a few dozen bucks and saves you a trip to the repair shop.

Was this review help?
19
5
Share
Expand All
MacStella
12/03/25 6:02am

The air filter of AX7 is located behind the glove compartment on the passenger side. Open the glove compartment and you'll find it by opening the box at the back. The position is quite easy to locate. I've changed it myself, and the operation is quick and convenient. Regularly replacing the filter is important to maintain clean air.

Was this review help?
17
2
Share
Expand All
More Forum Discussions

Where to Turn Off the Elantra ECO Mode?

The Elantra's ECO mode can be controlled via the DRIVE MODE button located on the right side of the steering wheel, which allows switching the vehicle's driving modes and also serves as the ECO switch. Below is an introduction to ECO: 1. The name ECO is derived from the synthesis of Ecology, Conservation, and Optimization. 2. Since its inception, it has been designed with the fundamental principles of technology, environmental protection, and economy in mind. These three attributes have become the enduring qualities pursued by the ECO intelligent engine family series. Here are the main principles of the ECO mode: 1. Primarily, during vehicle movement, it comprehensively evaluates and analyzes factors affecting fuel consumption, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to supply the engine for operation, effectively reducing fuel consumption compared to normal driving modes. 2. It controls the engine speed through appropriate gear selection to minimize unnecessary fuel consumption. The ECO mode mainly functions during vehicle movement through computer-controlled operations. Therefore, it does not operate during idle stops, in N or P gear positions, or in manual mode.
13
1
Share

What is the range of the EU7?

Beijing EU7 has an NEDC comprehensive range of 475km. It is equipped with a permanent magnet synchronous motor with a maximum power of 160kW (217Ps). Introduction to the Beijing EU7: Exterior Design: The new car adopts a closed grille, with a dot-matrix design added to the front bumper. The side and rear profiles of the BAIC New Energy EU7 largely follow the fuel-powered version, with a thick chrome strip connecting the taillights. Additionally, the decorative elements on the rear bumper differ from the fuel version, creating a cohesive look with the front fascia. In terms of dimensions, it measures 4805/1835/1528mm in length, width, and height, with a wheelbase of 2785mm. Interior: The BAIC New Energy EU7 features the latest design language, with a large floating central display screen that stands out and integrates the multimedia system. Chrome accents are added to the dashboard area and steering wheel, enhancing the refined visual appeal. Powertrain: The BAIC New Energy EU7 is powered by a permanent magnet synchronous motor with a maximum power of 160kW (217Ps), paired with a ternary lithium battery. Its NEDC comprehensive range is 451km.
3
3
Share

How to Adjust the Sensitivity of Electronic Throttle in Cars?

Electronic throttle can be equipped with an electronic throttle booster or modified ECU. For ECU modification, specialized software is required, and it's best not to use pirated software to avoid potential risks. Installing an electronic throttle booster does not affect the normal use of the vehicle. The output values of an electronic throttle booster are usually within the engine's rated power and will not cause any harm to the car. The electronic throttle booster can amplify the throttle signal and improve static response. The so-called 'acceleration' of an electronic throttle booster is mainly achieved by increasing the throttle response sensitivity. This means that the last 33% of the throttle signal from the pedal is no longer useful at any time. When the driver presses the pedal to 66%, the booster's output is already at full throttle, thereby increasing the throttle response sensitivity by 50%. Essentially, the throttle signal is adjusted continuously, changing from the previous 1:1 ratio to 1:1.x, where x is the signal amplification coefficient. It can also amplify the throttle signal speed to enhance dynamic response. When the throttle pedal is pressed, the booster calculates the rate of change of the throttle signal based on the depth and speed of the pedal press. The faster the change, the stronger the acceleration demand. The throttle booster will increase this rate of change, ultimately achieving better dynamic response in acceleration.
4
3
Share

Where is Dongfeng Fengshen produced?

Dongfeng Fengshen is produced by Dongfeng Passenger Vehicle Company Limited, an independent passenger vehicle brand under Dongfeng Motor Corporation, officially launched on March 26, 2009. On September 19, 2012, Dongfeng Fengshen models officially adopted the new double-swallow logo in a perfect circle. Production location: Dongfeng Fengshen is produced at the Dongfeng Liuzhou Automobile Plant. Company headquarters: Dongfeng Fengguang is a brand under Dongfeng Yu'an Vehicle Co., Ltd., which can be understood as a product of an equity-affiliated enterprise of Dongfeng Motor Group Company. The headquarters is located in Chongqing. Dongfeng Group: Dongfeng Fengshen is produced by Dongfeng Passenger Vehicle Company Limited, an independent product of Dongfeng Group's wholly-owned subsidiary, and a brand product that Dongfeng Company is fully committed to building. The address is located at the headquarters of Dongfeng Group in Wuhan, Hubei Province. Subsidiary brands: Dongfeng Fengxing is a brand of Dongfeng Liuzhou Motor Company, with its base in Liuzhou, Guangxi, which is the main production base for commercial vehicles, manufacturing various heavy, medium, and light trucks. Later, they also launched sedan models such as Jingyi and Jingyi S50, SUV models like SX6, Jingyi X3, Jingyi X5, Jingyi XV, and MPV models such as CM7, F600, and S500.
4
4
Share

What Causes the Clicking Sound When the Car Won't Start?

Possible reasons why a car makes a clicking sound but fails to start are as follows: 1. When turning the key, the clicking sound is the relay or starter motor working, indicating that the starter has responded but lacks the power to turn the flywheel, resulting in the car not starting. 2. The car not starting with a clicking sound could be due to insufficient battery power. Forgetting to turn off the headlights when parking or using too many external devices can drain the battery. 3. Low voltage can also cause the car not to start with a clicking sound. The reasons for low voltage may include an old battery that has degraded over time, reducing its storage capacity, or listening to music or running the air conditioning while the car is off. 4. Another possibility is that the gear is not in the P (Park) position when starting. This issue is unlikely to occur with manual transmission cars, as the usual practice is to park, shift to neutral, engage the handbrake, and turn off the engine in one smooth motion. Below are some car usage precautions: 1. Some owners leave the key partially turned to run the air conditioning or listen to music while waiting, which drains the battery quickly and can easily lead to a dead battery. 2. Always follow proper car usage practices. Ensure all lights are turned off when exiting the car. If the battery warning light on the dashboard comes on, seek professional repair services as soon as possible.
6
5
Share

Is the Volkswagen Golf GTI four-wheel drive?

The Golf GTI is not four-wheel drive; it is a front-engine, front-wheel-drive vehicle. Front-engine, front-wheel drive means the engine is positioned at the front of the car, and the front wheels drive the entire vehicle. Four-wheel drive refers to a system where all four wheels operate independently during driving, providing higher cornering limits on the road and optimal power distribution to each wheel during high-speed turns. The Golf GTI is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 162 kW and a maximum torque of 350 Nm. The engine achieves its peak power at 4,500 to 6,200 rpm and its peak torque at 1,500 to 4,400 rpm. This engine features hybrid injection technology and uses an aluminum cylinder head with a cast iron cylinder block. Part-time four-wheel drive: Part-time four-wheel drive is a system where the driver can manually switch between two-wheel drive and four-wheel drive. The driver can engage or disengage the transfer case to achieve two-wheel or four-wheel drive based on driving needs. Full-time four-wheel drive: Full-time four-wheel drive means that all four wheels of the vehicle are independently driven at all times during operation. This system requires the use of a central differential. Full-time four-wheel drive first appeared in Subaru vehicles. This four-wheel-drive mode significantly enhances the vehicle's off-road capability and handling performance.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.