Where is the cabin air filter located in the Audi Q7?

1 Answers
MaxLynn
07/30/25 12:28am
The cabin air filter in the Audi Q7 is located inside the glove compartment on the passenger side. To replace the cabin air filter, you first need to remove the glove compartment panel, then take off another layer of panel before you can access and replace the filter. The cabin air filter in a car is a consumable item that tends to wear out after some time. If not replaced for an extended period, its effectiveness diminishes significantly. There are two types of cabin air filters in cars: one with activated carbon and a standard type. The standard filter can only block dust and particulate matter from the outside air, while the activated carbon filter performs better, not only filtering out external impurities but also absorbing odors produced by prolonged use of the air conditioning. The Audi Q7 is a full-size SUV that emphasizes comfort, skillfully integrating sportiness, functionality, high technology, and luxury.
Was this review help?
10
2
Share
More Forum Discussions

Is it necessary to install underbody armor for Camry?

It is necessary to install underbody armor for Camry, as it can protect the chassis components from damage when driving in harsh road conditions. Below is a relevant introduction to automotive underbody armor: 1. Overview: The technical term for automotive underbody armor is automotive underbody anti-collision, anti-rust, and sound insulation coating ("UNDERCOATING" primer), a high-tech adhesive rubber asphalt coating. It is non-toxic, has high coverage and adhesion, and can be sprayed on exposed parts of the vehicle such as the chassis, wheel hubs, fuel tank, lower body panels, and trunk. It quickly dries to form a strong, elastic protective layer. 2. Functions: Underbody armor can effectively protect the chassis from impacts by road gravel, prevent minor scraping and friction, guard against corrosion from acids, alkalis, and salts on the chassis plates, prevent loosening of chassis screws, reduce noise transmission during driving to enhance driving tranquility, and block heat conduction from the chassis plates, keeping the cabin warm in winter and cool in summer.
3
5
Share

Where is the cabin air filter located in the Changan CS95?

Changan CS95's cabin air filter is located behind the glove compartment. To replace the cabin air filter, the glove compartment must be removed. The specific steps are as follows: 1. Open the glove compartment, there is a clip on the right side, pinch the pointed end of the clip to push the telescopic rod out to the left; 2. There is a knob on each side of the glove compartment, unscrew them to remove the knobs; 3. Remove the glove compartment; 4. Inside the glove compartment, you will find a square plastic cover, pry it off; 5. You will see a rectangular cover with clips on both sides, press the clips to open the cover, and you will find the cabin air filter. The Changan CS95 measures 4949mm in length, 1930mm in width, and 1790mm in height, with a wheelbase of 2810mm. It is powered by a Blue Whale 2.0T direct-injection engine, delivering a maximum horsepower of 232 HP, maximum power of 171 kW, and maximum torque of 360 Nm, paired with an Aisin 6AT transmission.
2
2
Share

Is the height of the Revere R600 too high?

Revere R600's height is just right. Here are the details: 1. Introduction: The exterior dimensions of the Revere R600 are 5940x2110/2140x2835/2940mm (varies depending on optional configurations), with a capacity for four people, blue license plate, and only a C-class driver's license required. The height of less than three meters fully demonstrates the flexibility and passability of a Type B vehicle, making it suitable for a wider range of driving scenarios. The vehicle body adopts an original factory cage structure + welding-free modification process, with balanced design and upgraded insulation layer. The whole vehicle is treated with thermal break insulation and soundproofing (patent protected), giving it outstanding performance in insulation, heat insulation, noise reduction, and soundproofing, greatly improving the comfort of living. 2. Power: The vehicle is based on the SAIC Maxus V90 long-wheelbase ultra-high roof chassis, providing more spacious interior compared to general Type B vehicles. It is equipped with an SAIC π 2.0T diesel engine, paired with a French Punch 6AT automatic transmission, meeting the National VI emission standards while delivering a maximum power of 110KW and a peak torque of 375N·m.
20
4
Share

What is a Hydraulic Coupling?

Hydraulic coupling, also known as fluid coupling, is a hydrodynamic device used to connect a power source (typically an engine or motor) to a working machine, transmitting torque through changes in the angular momentum of the fluid. Below is an introduction to hydraulic couplings: In automotive applications, the pump wheel of the hydraulic coupling is connected to the engine's flywheel. Power is transmitted from the engine crankshaft, and the fluid circulates between the pump wheel and the turbine, transferring torque from the engine to the transmission to drive the vehicle forward. The advantages of hydraulic couplings include flexible transmission, automatic adaptation, shock absorption, and torsional vibration isolation. They improve the starting capability of the power source, enabling it to start under load or no-load conditions. They also provide overload protection, preventing damage to the motor and working machine when external loads exceed limits. Additionally, hydraulic couplings offer energy-saving benefits by reducing the motor's starting current and duration, minimizing grid impact, and lowering the motor's installed capacity. For high-inertia, hard-to-start machinery, torque-limiting hydraulic couplings are used, while centrifugal machinery benefits significantly from speed-regulating hydraulic couplings. Except for bearings and oil seals, there is no direct mechanical friction, resulting in low failure rates and long service life.
18
2
Share

Is Exhaust Modification Illegal?

Modification of a vehicle's exhaust system is not permitted and constitutes illegal activity. Below is a detailed explanation regarding modifying a vehicle's exhaust system: 1. Vehicle exhaust systems cannot be modified. Neither technical modifications nor aesthetic alterations (such as decorative tailpipes) are allowed. Typically, offenders face fines ranging from 200 to 2000 yuan, are ordered to restore the original setup, and have the modified parts confiscated. Severe cases involving excessive noise and public disturbance may result in administrative detention. 2. Permitted vehicle modifications in China include: body color, wheels, exterior decorations, interior, bumpers, and headlights.
13
1
Share

Can Parallel Imported Vehicles Enjoy Warranty?

Parallel imported vehicles do not enjoy the official warranty policy, but this does not mean they are completely without warranty. Currently, in the field of parallel imported vehicles, relevant laws stipulate that the company issuing the final vehicle sales invoice is responsible for providing the warranty. Therefore, all parallel imported vehicle dealers will require customers to purchase a whole vehicle quality warranty product. More details are as follows: 1. In other words, the entities responsible for the warranty differ between parallel imported vehicles and China-spec vehicles, but parallel imported vehicles can still enjoy a whole vehicle warranty. 2. In fact, to protect consumers' legitimate rights and interests, warranty services for parallel imported vehicles have evolved to include dealer self-insurance services, insurance company vehicle quality liability insurance, and professional third-party quality warranty service providers.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.