Where is the cabin air filter located in the 2017 Peugeot 408?

2 Answers
StephanieMarie
07/25/25 3:00pm
The cabin air filter in the 2017 Peugeot 408 is located under the windshield on the right side of the engine compartment. The cabin air filter is a type of filter installed in the vehicle's air conditioning system, designed to absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. The 2017 Peugeot 408 is positioned as a compact car, featuring MacPherson strut independent suspension at the front and torsion beam non-independent suspension at the rear, with a front-wheel drive configuration. The 2017 Peugeot 408 is equipped with ventilated disc brakes at the front and disc brakes at the rear, with tire specifications of 215/55R16. It offers two engine options: a 1.8L and a 1.2T, paired with either a 5-speed manual transmission or a 6-speed automatic manual transmission.
Was this review help?
4
3
Share
McKinsley
08/11/25 9:18pm
I just replaced the cabin air filter for my 2017 Peugeot 408, which is located behind the glove compartment on the passenger side. Open the glove box and look carefully—there are plastic clips or small knobs on both sides securing it; pinch or twist them to remove the entire glove box, revealing the filter housing. When pulling out the old filter, check the arrow indicating airflow direction, and ensure the new filter is installed with the same orientation to avoid backward placement. I typically perform this every 10,000 km or once a year, especially if there’s an odd smell from the AC or reduced airflow—act promptly. The filter traps dust, pollen, and odors, maintaining cabin air cleanliness, preventing allergies, and improving cooling efficiency. Neglecting replacement can eventually clog air ducts, increase fuel consumption, or even damage the blower fan, so don’t underestimate this quick 5-minute task. Opt for branded filters for better durability—economical and hassle-free.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What is the difference between 0w20 and 0w30?

The differences between 0w20 and 0w30 are as follows: The viscosity of the oil is different, with 0w30 being more viscous than 0w20; the oil film thickness varies, as 0w30 can form a thicker oil film compared to 0w20, preventing engine cylinder wear and other phenomena; the fuel efficiency differs, with 0w20 being thinner than 0w30, which also means better fluidity, less resistance during machine operation, and better fuel economy. The detailed differences between 0w20 and 0w30 engine oil: The number after the W in the oil grade represents the high-temperature viscosity rating of the oil. This indicates the likelihood of the oil thinning at high temperatures. The larger the number, the higher the viscosity, and the higher the applicable environmental temperature, meaning the oil has better high-temperature stability and fluidity. Therefore, in terms of performance, specifically high-temperature fluidity and stability, 30-grade oil performs slightly better than 20-grade oil, with higher viscosity. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand -30°C. The smaller this number, the better the low-temperature fluidity: 0W is -35°C; 5W is -30°C; 10W is -25°C; 15W is -20°C; 20W is -15°C; 25W is -10°C. This ensures smoother cold starts for the vehicle. The second number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better the oil maintains its viscosity at high temperatures, which can also be understood as better lubrication performance under high temperatures. Relatively, better low-temperature fluidity means smoother cold starts for the vehicle and better engine protection. The viscosity of engine oil should not be too high or too low. If the viscosity is too low, it can increase engine wear. If the viscosity is too high, it can increase resistance during engine operation, leading to reduced power and increased fuel consumption. When the engine is running, the oil forms a film on the surfaces of various engine components, reducing friction between them and lowering the operating resistance within the engine. If the oil viscosity is too low, the oil cannot form a stable film, which can exacerbate engine wear. For fully synthetic oil, the recommended replacement interval is one year or 10,000 kilometers. For semi-synthetic oil, the replacement interval is slightly shorter, requiring a change every 7,000 kilometers or six months. When selecting engine oil, consider the following: Choose oil based on the engine's requirements. It is unnecessary to use overly advanced oil in engines with lower requirements, and lower-grade oil should not be used in engines with higher requirements. Preferably choose multi-grade oil, as it is economical, long-lasting, and efficient, providing better protection for the engine. Due to the characteristics of multi-grade oil, it may appear darker earlier and have lower oil pressure compared to conventional oil, both of which are normal. Since engine oil significantly affects the performance and lifespan of the engine, it is essential to strictly follow the vehicle's manual to select oil of the same series, service grade, and viscosity grade. The oil recommended in the vehicle manual is based on the engine's performance and the regional climate, providing guidance for oil selection and leaving a considerable safety margin.
16
0
Share

Where is the engine number located on a Toyota RAV4?

Toyota RAV4's engine number is located on the engine cylinder block or engine cover, with the model designation 6ZR. The position of the engine number varies among different manufacturers, and it can be used to indicate information such as the engine's production company, specifications, performance, features, technology, intended use, and production batch. The Toyota RAV4 is a model under the Toyota brand, with body dimensions of 4265mm in length, 1785mm in width, and 1705mm in height, and a wheelbase of 2660mm. The vehicle comes standard with features including VSC (Vehicle Stability Control), 6 airbags, TRC (Traction Control System), HAC (Hill-start Assist Control), and an automatic limited-slip differential.
13
1
Share

What Components Make Up a Manual Transmission?

Manual transmissions consist of the gear transmission mechanism, transmission housing, and control mechanism. The fundamental working principle of a manual transmission is to achieve gear ratio changes by engaging different gear sets. Most manual transmissions in vehicles are four-speed or five-speed stepped gear transmissions. Manual transmissions enable vehicles to obtain varying traction and speed under different operating conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within more favorable working ranges. The transmission efficiency of manual transmissions is higher than that of automatic transmissions. Therefore, with skilled driving, manual transmission vehicles can accelerate and overtake faster than automatic transmission vehicles while also being more fuel-efficient.
8
5
Share

Does the Zotye T800 have a manual transmission model?

Zotye T800 does not have a manual transmission model. It is a mid-to-large SUV officially announced by Zotye Auto, with a total of 10 models available in both six-seat and seven-seat versions. All 10 models of the Zotye T800 are automatic transmission models, and no manual transmission model has been released. In terms of interior design, the Zotye T800 adopts a symmetrical layout with an all-black color scheme, featuring a rotary knob gearshift mechanism and a large-sized LCD display on the center console to enhance the vehicle's premium feel. Regarding body dimensions, the Zotye T800 measures 4910mm in length, 1933mm in width, 1755mm in height, with a wheelbase of 2850mm.
5
2
Share

Where is the ETC installed on a car?

The installation position of ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be no less than 1.2 meters and no more than 2.5 meters in height, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, it should be installed in the microwave sunroof strip. ETC is the abbreviation of Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the vehicle owner's valid ID card and driving license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the driving license should include the page with the most recent annual inspection seal. A bank card for deducting highway tolls is also required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for official vehicles: Introduction letter of the vehicle owner (with official seal); Copy of the organization code certificate or business license (with official seal); Original ID card of the agent; Original driving license of the vehicle; Vehicle that needs to install ETC. Here are the precautions for installing ETC: Do not block the line of sight. It is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Install it on the right side behind the rearview mirror to avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and do not install it in a position that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If it is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and making it unusable. You will need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note that: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, keep a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front. The recognition speed of the ETC lane is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, leading to charging failure. When using a debit card to bind ETC, insufficient balance will also cause charging failure.
11
2
Share

What are the symptoms of a faulty front oxygen sensor?

Symptoms of a faulty front oxygen sensor: 1. Increased fuel consumption, as carbon buildup on the oxygen sensor can cause abnormal signal output, leading to an imbalance in the engine's air-fuel mixture ratio and resulting in higher fuel consumption; 2. Increased pollutant emissions, failing the annual vehicle inspection's tailpipe emissions test due to the oxygen sensor malfunction, as the three-way catalytic converter's purification capability is limited, and improper oxygen sensor operation can cause incomplete combustion, increasing pollutants; 3. Potential black smoke emission, caused by an abnormal air-fuel ratio due to the oxygen sensor malfunction; 4. Unstable engine speed and shaking, also due to an abnormal air-fuel ratio.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.