Where is the cabin air filter located in the 2016 Nissan Qashqai?

What are the body dimensions of the Lexus ES200?

The length, width, and height of the Lexus ES200 are 4975mm, 1865mm, and 1447mm respectively, with a wheelbase of 2870mm. Here is some extended information: 1. Length: The distance between the two extreme points in the length direction of the car, measured from the most protruding point of the front bumper to the most protruding point of the rear bumper. 2. Width: The distance between the two extreme points in the width direction of the car, which is the distance between the left and right most protruding points of the body. According to industry standards, the body width does not include the width of the extended side mirrors, meaning the most protruding points should be selected when the mirrors are folded. 3. Height: The distance from the ground to the highest point of the car. The highest point refers to the topmost position of the car body, excluding the length of the roof antenna.

5

2

Share

What are the penalties for not using turn signals when turning?

Penalties for not using turn signals when turning include fines and demerit points. Here are the details: 1. After an accident: If a vehicle is involved in an accident on the road, obstructs traffic, and is difficult to move, and fails to use warning lights as required, a fine of 200 yuan and 3 demerit points will be imposed. 2. When overtaking: If a motor vehicle overtakes without using lights as required, a fine of 100 yuan and 1 demerit point will be imposed. 3. Nighttime meeting: If a motor vehicle fails to use lights as required when meeting another vehicle at night, a fine of 100 yuan and 1 demerit point will be imposed. 4. Passing through a signal-controlled intersection: If a motor vehicle passes through a signal-controlled intersection without using lights as required, a fine of 100 yuan and 1 demerit point will be imposed. 5. Changing lanes: If a motor vehicle changes lanes without using lights as required, a fine of 100 yuan and 1 demerit point will be imposed.

17

0

Share

Why is the reversing radar not alarming?

If the radar in the car suddenly stops beeping or alarming and malfunctions, there may be three reasons: whether the radar host wire is loose; the buzzer is damaged; or the wiring at the bumper is damaged. The specific solutions are as follows: 1. If the reversing radar is found not to beep: check whether the power cord of the host is properly connected and whether there is current; whether the radar host wire is loose. If neither of these is the problem, then the issue may lie with the radar itself, and it needs to be repaired at a 4S shop. 2. If the problem is confirmed to be with the reversing radar: the first possibility to consider is that the buzzer is damaged. In this case, you need to purchase a new buzzer and install it. During the reversing process, if the obstacle is too far away, the radar may not sense it, resulting in no response. You can try getting closer. If the radar responds at a closer distance, then it is not a malfunction.

4

2

Share

Will There Still Be Problems After Transmission Water Ingress Repair?

There are usually no problems after repairing a water-ingressed transmission. A properly repaired transmission will not have any sequelae; those that do are due to incomplete repairs. The transmission is a very important component of a vehicle, as it can change the transmission ratio and expand the torque and speed effects on the drive wheels. Relevant information about the transmission is as follows: 1. Introduction: A device that changes the speed ratio and direction of motion. It is used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several pairs of gears. 2. Function: During vehicle operation, to adapt to different working conditions, the driving force and speed of the car need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the installation of a transmission.

18

5

Share

What type of driver's license is required to operate a pile driver?

To operate a pile driver on the road, an M-class driver's license is required, as pile drivers fall under the category of wheeled self-propelled machinery. According to the "Permitted Vehicle Types and Codes," code M designates wheeled self-propelled machinery as the permitted vehicle type. Below is more information about the M-class driver's license: 1. Permitted Vehicle Types: Wheeled self-propelled machinery is divided into rail wheeled self-propelled machinery and ordinary wheeled self-propelled machinery (including tire-type and hub-type). The former includes train locomotives, electric multiple units, railcars, rail motorcycles, rail cranes, and specialized railway construction machinery (excluding ordinary freight carriages). The latter includes automobiles, tire cranes, road rollers, tractors, harvesters, and specialized construction machinery (excluding automobile trailers). 2. Age Requirement: The age range for applying for an M-class driver's license is 18 to 60 years old. 3. Other Permitted Vehicle Types: The M-class license only permits the operation of wheeled self-propelled machinery (M-class) and no other vehicle types.

10

0

Share

What to Do When There's Abnormal Noise Upon Releasing the Accelerator?

When abnormal noise occurs upon releasing the accelerator, you should first check whether it is due to a cold start, inappropriate engine oil, or a backfire fault in the engine. Here are the detailed explanations: 1. Abnormal noise during cold start: When starting a cold engine, the oil pump cannot immediately establish oil pressure, causing insufficient lubrication of the valves and resulting in abnormal noise. After the car has been parked for a long time, the engine oil flows back to the oil pan. During a cold start, the oil pump cannot immediately establish oil pressure, especially in the upper part of the engine, leading to insufficient lubrication of the valves. The hydraulic lifters and mechanical rocker arms fail to operate properly, causing abnormal noise. Solution: Reduce the number of times the car is turned off. 2. Abnormal noise caused by inappropriate engine oil: If the engine oil viscosity is too high, it may not provide sufficient lubrication, leading to abnormal noise. Solution: Replace with the required gasoline.

7

1

Share

Where is the cabin air filter located in the 2016 Nissan Qashqai?

What are the body dimensions of the Lexus ES200?

What are the penalties for not using turn signals when turning?

Why is the reversing radar not alarming?

Will There Still Be Problems After Transmission Water Ingress Repair?

What type of driver's license is required to operate a pile driver?

What to Do When There's Abnormal Noise Upon Releasing the Accelerator?

How many days does it take to get the vehicle relocation quota in Beijing?

Does the Buick Encore have a maintenance light?

Where is the VIN located on the GAC Trumpchi GM8?

Is the Corolla 1.2T technology mature?