Where is the cabin air filter located in the 2013 Peugeot 308?

1 Answers
OJudah
07/30/25 5:02am
The cabin air filter of the 2013 Peugeot 308 is located in the front engine compartment on the passenger side. The replacement steps for the cabin air filter are: 1. Open the front hood of the vehicle; 2. Use a screwdriver to remove the 4 screws near the passenger-side windshield; 3. After removing the screws, pull out the sound insulation pad above to reveal the cabin air filter of the Peugeot 308; 4. Replace with a new cabin air filter. The 2013 Peugeot 308 is a compact car produced by Dongfeng Peugeot. Taking the 2013 Peugeot 308 Manual Comfort model as an example, its body dimensions are: length 4558 mm, width 1805 mm, height 1505 mm, wheelbase 2612 mm, ground clearance 129 mm, and fuel tank capacity 56 liters.
Was this review help?
12
4
Share
More Forum Discussions

Is Engine Restoration Protection Necessary?

Engine restoration protection is necessary. Engine restoration protection fluid, also known as engine protector, is designed to protect the engine. It is a maintenance agent that effectively reduces wear and corrosion of engine components, inhibits the formation of deposits such as gum and sludge, and forms an extremely thin but highly pressure-resistant and wear-resistant protective layer on metal surfaces. This prevents engine oil from oxidizing, thickening, or acidifying, thereby protecting engine components and extending the engine's lifespan. The specific functions of engine restoration protection fluid are as follows: 1. Anti-wear: Reduces wear between internal metal components of the engine. 2. Lubrication: Forms a protective film on internal metal components of the engine, providing lubrication. 3. Noise reduction: Effectively reduces noise caused by friction or decreased lubrication performance of the engine oil. 4. Improves engine power and saves fuel: Enhanced lubrication performance reduces friction, thereby increasing engine power and, to some extent, reducing fuel consumption.
8
1
Share

What are the reasons for a sudden significant increase in fuel consumption?

The following are the reasons for a sudden significant increase in fuel consumption: 1. Faulty coolant temperature sensor: Its resistance value at different temperatures should meet the standard. If the resistance is too high, the computer may mistakenly think the engine is in a cold state, thus performing a cold-start enrichment control, which increases fuel consumption. 2. Faulty air flow meter: Errors in the air flow meter or intake manifold pressure sensor can directly affect the fuel injection quantity. 3. Faulty throttle position sensor: When the throttle is at small to medium openings, the full-load switch contact should be open. If the full-load switch contact remains closed or closes too early, the computer may continuously or prematurely perform full-load enrichment, thereby increasing fuel consumption. 4. Excessive fuel pressure: The fuel pressure at idle should meet the specified value. As the throttle opens, the fuel pressure should gradually increase, and the fuel pressure at full throttle should be about 50kPa higher than at idle.
6
2
Share

Differences Between China-Spec and Canada-Spec Jeep Wrangler

Differences between China-spec and Canada-spec Jeep Wrangler are as follows: 1. System difference: The parallel import 2.0T version comes standard with a 48V mild hybrid system, while the China-spec version does not. 2. Fuel consumption difference: China's dual-credit policy for fuel consumption is very stringent. Although the fuel consumption of the new 2.0T model has decreased significantly, it still fails to meet the target value. Lower fuel consumption can also improve the vehicle's range, which is crucial for long-distance travel, but the China-spec version does not offer the 48V mild hybrid system. 3. Mode difference: The Canada-spec version features a 4HAuto full-time four-wheel drive mode. In North America, only the Sahara model comes with the 4HAuto full-time four-wheel drive mode, while the Rubicon, as a pure off-road model, does not have the full-time four-wheel drive mode and cannot maintain four-wheel drive on paved roads for extended periods.
10
0
Share

What are the consequences of not having a vehicle inspected?

Failure to have a vehicle inspected on time may result in denied accident claims. Vehicles that are not inspected will be impounded and fined. Below is relevant information about vehicle inspections: 1. National regulations: Motor vehicles must periodically pass inspections for exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and receive an inspection compliance sticker provided there are no traffic violations. All inspection dates are based on the registration date listed on the vehicle license. From the date of registration, motor vehicles must undergo safety technical inspections within the following timeframes, commonly referred to as 'annual inspection' or 'annual review'. 2. Periodic inspections: Small and micro non-commercial passenger vehicles must be inspected every 2 years within the first 6 years, annually after exceeding 6 years, and every 6 months after exceeding 15 years. Commercial passenger vehicles must be inspected annually within the first 5 years and every 6 months after exceeding 5 years. Trucks and large and medium non-commercial passenger vehicles must be inspected annually within the first 10 years and every 6 months after exceeding 10 years. Imported vehicles, like other vehicle types, can undergo periodic inspections at any inspection station.
13
5
Share

What is the difference between 100W and 100Y tires?

Maximum load capacity and meaning are different. The detailed differences between 100W and 100Y tires are as follows: 1. Different maximum load: (1) The maximum load capacity of run-flat tire 96Y is 710kg. (2) The maximum load capacity of run-flat tire 100W is 800kg. 2. Different meanings: 100W and 100Y represent the tire's load index and speed rating. 100 = The tire's maximum load capacity is 800 kg W = Maximum speed is 270 km/h Y = Maximum speed is 300 km/h.
20
0
Share

What are the gear positions for the Hyundai ix35 automatic transmission?

Beijing Hyundai ix35 automatic transmission models generally have several gear positions such as P, R, N, D, 3, 2, and 1. P stands for Parking gear, used when parking (when turning off the engine); R stands for Reverse gear, used when reversing; N stands for Neutral gear, used for brief stops; D stands for Drive gear, used when the vehicle is moving forward. There are also gear positions like 3, 2, and 1. 3 is also a forward gear, with the transmission automatically switching between 1st and 3rd gears; 2 indicates 2nd gear, where the transmission stays in 2nd gear, useful for starting on slippery surfaces; 1 is 1st gear. You may also see S and L gears. S stands for Sport mode, where the transmission can shift freely, while L stands for Low gear.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.