Where is the cabin air filter located in the 2012 Nissan X-Trail?

1 Answers
OAaron
07/30/25 6:06am
The cabin air filter in the 2012 Nissan X-Trail is located on the right side of the driver's accelerator pedal. Open the cover panel on the lower right side of the center console to access the cabin air filter cover. The cabin air filter is a component installed in the vehicle's air conditioning system that absorbs dust particles, alleviates respiratory discomfort, reduces irritation for allergy sufferers, and protects the air conditioning cooling system. The Nissan X-Trail is an SUV under Dongfeng Nissan, with dimensions of 4630mm in length, 1785mm in width, and 1685mm in height, and a wheelbase of 2630mm. In terms of configuration, the vehicle is equipped with an AVM (Around View Monitor) system, which uses four ultra-wide-angle cameras to synthesize a bird's-eye view of the vehicle's surroundings and provides functions to assist the driver for safer driving.
Was this review help?
14
0
Share
More Forum Discussions

What documents are needed for a driver's license test?

The documents required for a driver's license test are: 1. For locals: household registration book and valid ID card; 2. For non-locals: ID card and temporary residence permit; 3. For elderly learners: prepare materials and pass a medical examination; 4. For left lower limb disabled learners: only automatic transmission is allowed, fill out the motor vehicle driver application form, undergo a medical examination at a designated hospital, and register after passing; 5. For active military personnel: original and photocopies of officer certificate, civilian cadre certificate, soldier certificate, retired cadre certificate, retired officer certificate, or retired civilian cadre certificate, medical examination stamp from a hospital at or above the regimental level, and proof from a unit at or above the regimental level; 6. For active armed police: original and photocopies of police officer certificate, soldier certificate, civilian cadre certificate, student certificate, or retirement certificate, medical examination stamp from a hospital at or above the regimental level, and proof from a unit at or above the regimental level. Armed police can only undergo medical examinations at armed police hospitals.
16
1
Share

What Causes Severe Engine Shaking and RPM Drop During Idle?

Below are the specific reasons for severe engine shaking and RPM drop during idle: Clogged Catalytic Converter: A clogged catalytic converter can lead to poor exhaust flow, reduced power, increased fuel consumption, and in severe cases, engine shaking or even stalling. Faulty Spark Plugs: Faulty spark plugs can cause idle shaking, noticeable power loss, increased fuel consumption, and may trigger a series of engine misfire symptoms (such as backfiring, black smoke from exhaust, severe vibration, etc.). Throttle Body Carbon Buildup: Carbon buildup is the main factor affecting throttle body performance. Not cleaning the throttle body for extended periods can cause errors in throttle opening and allow contaminated air to enter the engine cylinders, resulting in abnormal engine operation.
17
1
Share

What brand is the Altima?

The Nissan ALTIMA, also known as the Nissan Teana North American version, is a family sedan produced by the Japanese automaker Nissan. Powertrain: The Teana is equipped with a 2.0L naturally aspirated engine and a 2.0T variable compression ratio turbocharged engine. The 2.0L naturally aspirated engine delivers a maximum output of 117kW, while the 2.0T variable compression ratio turbocharged engine produces a maximum output of 185kW, paired with a CVT transmission. Interior: It features a minimalist design with a two-tone interior color scheme (dark upper section and light lower section). The 8-inch floating central touchscreen integrates Nissan's Intelligent Connectivity system, offering both touch and voice interaction. It supports features like real-time navigation, online entertainment, and online payments. Upgrades include an 8-inch multimedia system and vehicle connectivity. The seats utilize three-layer cushioning materials with newly upgraded 3D side bolster support, along with added stain-resistant coating and diamond-quilted stitching craftsmanship.
13
0
Share

Can Overheated Brake Discs Be Rinsed Directly with Water?

Overheated brake discs should not be rinsed directly with water. Reasons why water should not be used to cool overheated brake discs: When brake discs are in a high-temperature state, using cold water to cool them can cause the discs to crack suddenly due to the rapid temperature change, leading to the opposite effect. The cooling time of brake pads depends on various uncertain factors such as weather temperature, degree of overheating, and the material of the brake pads. Solutions for overheated brake discs: The primary method to reduce speed and cool the brake discs is to utilize the resistance of the engine at low speeds, with braking as a supplementary measure. This approach helps minimize wear on the brake pads and allows them to cool down over time.
6
3
Share

How is overloading of private cars penalized?

Overloading a private car by one person results in a 3-point deduction and a fine. Damage to road infrastructure: Due to the load of overloaded vehicles far exceeding the design load of roads and bridges, it causes road surface damage, bridge fractures, and significantly shortens the service life. Increased risk: Overloaded vehicles have increased mass and inertia, leading to longer braking distances and higher risks. Severe overloading can cause tire blowouts, sudden deviation, brake failure, rollovers, and other accidents due to excessive tire load and deformation. Additionally, overloading affects the vehicle's steering performance, increasing the likelihood of accidents due to loss of steering control. Impact on road traffic flow: Overloaded vehicles cannot travel at normal speeds, occupying lanes for extended periods, directly affecting the smooth flow of traffic.
6
0
Share

What are the methods for seamless dent repair in cars?

Seamless dent repair in cars includes the pull-out method and the pry-up method. Pull-out method: First, use hot melt adhesive to attach a shim to a suitable force-bearing point on the exterior of the car. Then, use a "T"-shaped tool to slowly pull the shim back to its original position on the body. Next, under lighting, use a small hook to push out minor uneven areas. Finally, use a rubber hammer to gradually flatten any protruding surfaces. Pry-up method: Remove the door interior and components until the dent is visible from inside the door. Then, insert a lever tool into the door, locate the dent, and apply steady, even pressure to push the dented metal back out until it blends seamlessly with the paint, matching the original curvature of the car's surface. This method is primarily used for larger dents on car doors.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.