Where is the cabin air filter located in the 2010 Sylphy?

1 Answers
MacPenelope
07/25/25 12:28pm
The cabin air filter in the 2010 Sylphy is located behind the glove compartment on the passenger side. To replace it, you must remove the glove compartment by unscrewing the three screws at the bottom of the glove box. Functions of the cabin air filter: 1. Ensures the filter tightly fits the housing to prevent unfiltered air from entering the cabin; 2. Separates solid impurities such as dust, pollen, and abrasive particles from the air; 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2 in the air with strong and lasting adsorption capability; 4. Prevents car windows from fogging up, ensuring clear visibility and driving safety; 5. Provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; 6. Effectively sterilizes and deodorizes.
Was this review help?
9
4
Share
More Forum Discussions

Is the Environmental Protection Label Still Required?

Environmental protection labels are no longer required. According to the new policy, the vehicle annual inspection and environmental protection inspection labels have been merged into one. As long as the vehicle passes the annual inspection, there is no need to obtain a separate environmental protection label, provided that the tail gas inspection is conducted normally. For vehicles in 2020, only the annual inspection label is required. Nowadays, annual inspection labels are linked with the traffic police system and are available as electronic labels, eliminating the need to display them on the windshield. The automotive environmental protection label is a classification label issued by the state for vehicle emission standards, divided into yellow and green categories. It is issued after reviewing the vehicle type and emission standards, aiming to meet the requirements of energy-saving and emission reduction inspections as well as regular environmental protection checks for vehicles.
14
5
Share

What suspension does the new Jetta use?

The new Jetta uses a MacPherson independent suspension for the front and a torsion beam non-independent suspension for the rear. The MacPherson suspension is a common type of independent suspension, and its application is quite widespread. The structure of the MacPherson suspension is very simple, consisting of only an L-shaped control arm. This type of suspension hardly occupies any space in the engine compartment, which is why many front-transverse-engine vehicles use MacPherson front suspension. The torsion beam suspension is a relatively common non-independent suspension. Using a torsion beam for the rear suspension can expand the rear passenger space and trunk space, which is very important for compact cars. The new Jetta is a four-door, five-seat sedan with dimensions of 4501 mm in length, 1704 mm in width, and 1469 mm in height, and a wheelbase of 2604 mm. The car is equipped with a naturally aspirated engine with a maximum horsepower of 90 hp and a maximum power output of 66 kW.
20
2
Share

What is the normal idle speed for a cold start?

Generally, the normal idle speed for a cold start ranges between 500 and 850 RPM, while the instantaneous idle speed during a cold start can be between 1500 and 2000 RPM. Here is an introduction to car idle speed: 1. When a car engine runs without any load, it is called idling. When the accelerator pedal is fully released during engine operation, the engine enters an idle state. The engine speed during idling is referred to as the idle speed. The idle speed can be adjusted by modifying the throttle opening size, among other methods. The optimal idle speed is the lowest RPM at which the engine does not shake. 2. After a cold start, there is a high idle speed process, which is more noticeable in winter. This is a phenomenon controlled by the vehicle's onboard computer (especially in vehicles with electronic throttle control systems). Once the engine reaches a certain temperature, the idle speed will return to normal.
20
4
Share

What is the pure electric range of the BMW 530Le?

The BMW 530Le has been upgraded with a new 811 battery, increasing its pure electric range to 95km. Introduction to Range: Range, also referred to as endurance, is the total distance a vehicle or ship can travel continuously with its maximum fuel reserve. For electric vehicles, range refers to the distance traveled from a fully charged state of the power battery to the end of the test under standard conditions, which is an important economic indicator for electric vehicles. Definition of Range: The range of new energy vehicles refers to the distance traveled at a constant speed under ideal road conditions, wind speed, temperature, and other factors on a single full charge. Hybrid vehicles and lead-acid battery vehicles (low-speed vehicles) generally have a relatively shorter range.
3
5
Share

Why is the Jaguar XF wiper not spraying water?

Jaguar XF wiper not spraying water requires replacement of the wiper blades. Jaguar's exterior design: In terms of design, the Jaguar XF leans more towards the XK's car-making philosophy, exuding a modern feel: a bold front grille, sleek body lines, complemented by the leaping jaguar emblem embedded in the center of the grille, showcasing the car's extraordinary presence. The interior space of the Jaguar XF is very spacious, easily accommodating five adults, harmonizing perfectly with its exterior style. The XF also boasts exquisite craftsmanship, delivering a prestigious driving experience. Jaguar's driving system: The sequential shift system provides the driver with one-touch manual shifting via the paddle shifters on the steering wheel; the driver can choose from 21 transmission modes to adapt throttle response and shift strategy to actual road conditions and driving environment.
12
5
Share

What is the minimum ground clearance of the BMW 2 Series Gran Tourer?

The minimum ground clearance of the BMW 2 Series Gran Tourer is 165mm. Chassis of the BMW 2 Series Gran Tourer: The vehicle is equipped with front MacPherson strut independent suspension and rear multi-link independent suspension. As a touring car, its positioning determines that the chassis height needs to accommodate most road conditions. Function of minimum ground clearance: A car's minimum ground clearance reflects its passing ability. Generally, the lower the minimum ground clearance, the worse the vehicle's passing performance. If a car's ground clearance is below 50mm, it will significantly affect driving. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the ground when the car is fully loaded and stationary, indicating its ability to pass over obstacles like stones without collision. Sedan models typically have smaller ground clearances as they usually drive on flat urban roads, while SUVs have larger minimum ground clearances. The design of a car's minimum ground clearance must consider its passing capability during driving.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.