Where is the cabin air filter located in a Volvo S60?

1 Answers
Ronan
07/29/25 6:22pm
The cabin air filter in a Volvo S60 is located inside the glove compartment on the front passenger side. The purpose of the cabin air filter is to absorb various harmful substances in the air, minimizing the risk of passengers experiencing allergic reactions or irritation. Taking the 2021 Volvo S60 as an example, its body dimensions are: length 4761mm, width 1850mm, height 1437mm, with a wheelbase of 2872mm and a minimum ground clearance of 147mm. The 2021 Volvo S60 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 120kW and a maximum torque of 265Nm, paired with an 8-speed automatic transmission.
Was this review help?
18
3
Share
More Forum Discussions

What is the impact of high altitude on fuel consumption?

High altitude affects fuel consumption by reducing air pressure and decreasing engine air intake, leading to incomplete fuel combustion. This directly results in reduced vehicle power and increased fuel consumption. Factors affecting fuel consumption: Vehicle weight, car design, engine thermal efficiency. Methods to reduce fuel consumption: Shift gears promptly: Prolonged driving in low gears not only maintains low speed but also increases fuel consumption, especially when driving on slopes. The shorter the gear shifting time, the more fuel can be saved. Reduce idle time: In urban driving, long waits at traffic lights are common. Turning off the engine during these times can save fuel. Drive at economical speed: The economical speed for most cars is between 60 km/h and 80 km/h. Fuel consumption is minimized when driving within this speed range.
8
3
Share

Is It Okay to Buy a One-Year-Old Stock Car?

Is It Okay to Buy a One-Year-Old Stock Car? A one-year-old stock car can be purchased, but it depends on three aspects: the dealer's storage conditions, the dealer's inventory methods, and the condition of the vehicle itself. Definition of a Stock Car: A stock car generally refers to a vehicle that has remained unsold for more than three months after being manufactured and leaving the factory. Due to the emphasis on timeliness in the automotive manufacturing industry, it typically takes one to two months for a new car to go from production to being sold to a buyer under normal circumstances. Vehicles that exceed three months or longer are usually considered stock cars. Potential Issues with Stock Cars: After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires in a new car may deteriorate if left idle for extended periods without periodic inspection and maintenance. Issues such as moisture damage and aging are common. Only a very small number of dealers perform periodic maintenance, which is not costly but consumes manpower and time. Some 4S stores even store cars in open parking lots, exposing them directly to sun, wind, and rain. For stock cars stored for too long without proper warehouse management, the aging of electronic components and rubber parts is often undetectable without professional testing equipment. Many long-stocked vehicles also suffer from insufficient oil or battery charge.
20
0
Share

How Long Does It Take to Clean a Car Interior?

Regular maintenance and cleaning of the car interior usually take 1-2 hours, and it is recommended to perform interior cleaning periodically. Below is relevant information about car interior cleaning: 1. Overview: The time required for cleaning varies depending on the extent of the cleaning. A standard cleaning typically takes 1-2 hours. A deep cleaning, which includes additional services, may take longer, sometimes up to around 3 hours, depending on factors such as the availability of staff and the advancement of equipment at the service center. 2. Cleaning Frequency: Under normal circumstances, a car that is kept clean should undergo interior cleaning four times a year, once every quarter, including an interior disinfection treatment.
18
3
Share

Where is the spark plug located on a Ghost Fire motorcycle?

The spark plug of a Ghost Fire scooter motorcycle is located on the engine cylinder head, beneath the rider's seat and under the seat storage compartment. If the spark plug is damaged, it can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the normal operation of the vehicle. Severe erosion of the spark plug, including blistering, damage, or melting and erosion of the electrode, indicates that the spark plug is ruined and should be replaced. Spark plug replacement interval: Under normal maintenance conditions, it should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. Generally, platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
2
4
Share

Why does the black car paint appear dull and not shiny?

Black car paint appears dull and not shiny because waxing was not performed after polishing, leading to this condition. Benefits of waxing: The advantage of waxing a car is that it provides waterproofing. During daily use, cars are often exposed to the air and subjected to wind, sun, and rain over time, which can damage the body. Additionally, wax offers resistance to high temperatures, effectively maintaining the smoothness of the car's paint surface and protecting against UV radiation, thereby extending the lifespan of the paint. Precautions for car waxing: Depending on the driving environment and parking locations, the interval between waxing should vary. Before waxing, it is essential to thoroughly clean any dirt and dust from the car's exterior.
20
5
Share

What Lights to Use in Highway Tunnels?

On highways, you should use low beam lights when entering a tunnel. If there is no lighting in the tunnel, alternately use high and low beam lights to signal. Do not use high beam lights: Most tunnels nowadays are equipped with lighting, though not very bright. Low beam lights are sufficient for safe driving. Never use high beam lights because tunnels are inherently narrow, and oncoming traffic can be stressful. High beams can instantly blind drivers of oncoming vehicles in this confined space. If an accident occurs in such a small area, it could potentially disrupt the entire tunnel traffic. Be mindful of light differences: When entering a tunnel, the surrounding space darkens, causing your pupils to contract to adapt to the dark environment. After driving in the tunnel for a long time, as you approach the exit, you may encounter a bright white light that temporarily blinds you. Stay calm and continue driving normally during this adjustment period. Do not speed: Tunnel entrances typically have speed limits. Even if there are no other vehicles to interfere with your driving, do not exceed the speed limit inside the tunnel. Different tunnel environments have specific speed limits for good reasons, so speeding could lead to immeasurable consequences.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.