Where is the Cabin Air Filter Located in a Toyota Camry?

How many turn signals are required throughout Subject 2?

There are a total of 6 instances where turn signals are required in Subject 2, which are: When starting the vehicle, turn on the left turn signal; When starting on the slope, turn on the left turn signal; During parallel parking, turn on the right turn signal when the vehicle passes the parking spot and stops 30 cm from the side line, preparing to reverse; Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking spot during parallel parking, shift into drive gear and turn on the left turn signal, then turn it off promptly after exiting; When entering the right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: Failure to use or incorrect use of turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Turning the steering wheel within less than 3 seconds of turning on the turn signal before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed under the following conditions: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and S-curve driving (commonly known as the S-bend) as mandatory items (some regions also include a sixth item: high-speed card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pole test, slope parking and starting, parallel parking, single-plank bridge crossing, S-curve driving, right-angle turns, passing through a width-restricted gate, passing through continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

19

2

Share

How to Turn On the Ambient Lighting in BYD Han?

Here are the methods to activate the ambient lighting in BYD vehicles: 1. When the vehicle is not started, the interior dome light is turned on by default, and touching it can adjust the brightness; 2. When the vehicle is started, the interior dome light is turned off by default, and touching it can control the on/off function. Below is relevant information about car control buttons: 1. Light buttons: Vehicles require different lights to be turned on in various situations, and the lights serve different functions. 2. Air conditioning buttons: The air conditioning system enhances the comfort of both the driver and passengers. 3. Wiper buttons: Wipers are commonly used during rainy days.

13

3

Share

Will highways be closed on rainy days?

Normally, highways are not closed during regular rainy days unless there are extreme weather conditions such as heavy rain or dense fog, in which case temporary closures may be implemented to prevent accidents. Here are some precautions for driving on highways during rainy days: 1. Stay alert. While driving, in addition to staying focused, turn on the windshield wipers and defoggers to ensure clear visibility through the front and rear windshields for accurate judgment of road conditions. 2. Adjust your state and check the vehicle. Drivers should rest well before traveling to ensure sufficient energy. Secondly, inspect the vehicle's condition thoroughly, performing routine checks such as brakes, steering, lights, dashboard, and tires. In rainy weather, pay special attention to checking the windshield wipers to ensure all components are intact and functioning properly. 3. Control your speed. Drivers should maintain a moderate speed, generally between 80 to 90 kilometers per hour, and avoid sudden acceleration or hard braking during normal driving.

2

5

Share

How long after passing the written test can you take the road test?

Starting from the day you pass the written test (Subject 1), you can apply for the basic skills test (Subject 2) after 10 working days; and you can apply for the road test (Subject 3) after 30 days. More details are as follows: 1. Subject 2, also known as the basic skills test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test, which includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Subject 3, also known as the road test, is part of the motor vehicle driver's license assessment. It refers to the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination.

18

4

Share

Which One is the Air Conditioning Switch in a Honda Car

The AC button in the center of the Honda car's central control screen is the air conditioning switch. Below is relevant information about car switch buttons: 1. Light buttons: Vehicles need to turn on different lights in different situations, mainly including low/high beams, fog lights, and position lights. 2. Air conditioning button: Summer and winter temperatures are extreme, and air conditioning can improve the comfort of drivers and passengers. 3. Wiper button: Wipers are commonly used on rainy days, and they are also needed when the front windshield is dirty. 4. Front/rear cover buttons: The front engine hood is opened less frequently, only during maintenance and repairs, while the trunk is used more often. 5. ESP body stability system button: In rainy or snowy weather, cars are prone to skidding while driving, and this function can improve body stability.

18

5

Share

What does SF in engine oil represent?

Engine oil S represents gasoline engine oil, and F represents the quality grade. Below is a detailed introduction to engine oil grades: 1. C stands for diesel engine oil: From CA, CB, CC, CD, CE, CF, CF-4, CG-4, CH-4, CI-4, to CJ-4, the further the letter in the sequence, the higher the oil quality grade. Generally, CD grade oil is used for diesel engines, while turbocharged diesel engines require higher quality oil, with -4 indicating that the oil is suitable for 4-stroke diesel engines. 2. S stands for gasoline engine oil: API engine oils are divided into two categories. The S series represents oils for gasoline engines, with specifications including SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN. 3. When both S and C letters are present: It indicates that the oil is suitable for both gasoline and diesel engines.

17

5

Share

Where is the Cabin Air Filter Located in a Toyota Camry?

How many turn signals are required throughout Subject 2?

How to Turn On the Ambient Lighting in BYD Han?

Will highways be closed on rainy days?

How long after passing the written test can you take the road test?

Which One is the Air Conditioning Switch in a Honda Car

What does SF in engine oil represent?

What brand of tires does the Territory come with?

How Many Seconds of Blind Driving Does One Second of Distraction Equal?

Can the Ora R1 drive on highways?

How Long Can You Continue Driving with a Faulty Mechatronic Unit?