Where is the cabin air filter located in a Porsche Panamera?

1 Answers
EmeryMarie
07/29/25 6:58pm
The cabin air filter in a Porsche Panamera is located behind the glove compartment on the passenger side. To replace the cabin air filter, the passenger side glove compartment needs to be removed. The Panamera is a large luxury vehicle under the Porsche brand. The standard Panamera models are equipped with two engine options: one is a 2.9-liter twin-turbocharged engine, and the other is a 4.0-liter twin-turbocharged engine. The 2.9-liter twin-turbocharged engine delivers a maximum torque of 330 horsepower and 450 Newton-meters, while the 4.0-liter twin-turbocharged engine produces a maximum torque of 460 horsepower and 620 Newton-meters. The Panamera features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
5
4
Share
More Forum Discussions

Can You Shift Gears During Straight-Line Driving in Subject Three?

You can shift gears during straight-line driving in Subject Three, but you must ensure that the gear matches the vehicle speed. If the vehicle speed and gear do not match, points will be deducted. Techniques for shifting gears during straight-line driving in Subject Three: Upshifting: After starting the vehicle and entering the normal driving route, immediately press the accelerator pedal to quickly increase the speed to the low-speed range of the next higher gear. Shift the gear lever to the higher gear. When lifting the clutch and accelerating, the engine and vehicle should not shake. If shaking occurs, it indicates insufficient speed increase, and the speed should be raised further. Downshifting: First release the accelerator, apply slight braking, press the clutch pedal fully with the left foot, and then shift to a lower gear. Speed and gear matching: 1st gear speed range: 0-15 km/h; 2nd gear speed range: 15-25 km/h; 3rd gear speed range: 25-35 km/h; 4th gear speed range: 35-40 km/h. If the wrong gear is engaged, return to the original gear and start again, but upshifting beyond the next gear is not recommended.
11
5
Share

What is the actual fuel consumption of the Passat Lingyu 1.8t?

The MIIT comprehensive fuel consumption of the Passat Lingyu 1.8t is 9.1-10.3L/100km. Methods to determine fuel consumption: Judge fuel consumption through the car's dashboard, where F=full (represents full); E=empty (represents empty). When the fuel tank red light comes on, record the mileage, then note how much fuel is added. When the fuel is next exhausted, record the mileage again. Subtract the initially recorded mileage from the current mileage, then divide by the fuel amount to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. In a relative sense, the size of a car's displacement does not form a direct proportional relationship with fuel consumption. Besides displacement, factors such as the car's shape, weight, and engine technology are also important factors affecting fuel consumption. Among models with the same displacement, the more advanced the engine technology, the more fuel-efficient the car will be.
6
0
Share

Is the Car Air Conditioner on Internal or External Circulation?

Car air conditioners can operate on either internal or external circulation. Below is a related introduction to car air conditioners: 1. Compression process: The compressor draws in low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas, which is then discharged from the compressor. 2. Heat dissipation process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser. Due to the reduction in pressure and temperature, the refrigerant gas condenses into a liquid, releasing a significant amount of heat. 3. Throttling process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, where its volume increases, and its pressure and temperature drop sharply, exiting the expansion device in a mist form (fine droplets). 4. Heat absorption process: The mist-like refrigerant liquid enters the evaporator. Since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas. During the evaporation process, it absorbs a large amount of surrounding heat, and then the low-temperature, low-pressure refrigerant vapor re-enters the compressor.
9
4
Share

What Causes Damage to the Grille of the New LaCrosse?

Extremely low temperatures causing the grille to become brittle and crack. LaCrosse Features: The Buick New LaCrosse is the vertical replacement model for SAIC-GM's LACROSSE, retaining the original model's bold exterior characteristics while making improvements in design, power, and space. It also upgrades multiple luxury features, posing a comprehensive challenge to Japanese rivals like the Toyota Camry and Honda Accord, as well as German competitors such as the Volkswagen New Passat and Magotan. LaCrosse Powertrain: In terms of power, the 3.0L V6 SIDI direct-injection engine delivers a maximum power of 190kW/6800rpm and a peak torque of 296 N·m/5600rpm. The 2.4L engine is the same as that in the New Regal, which struggles slightly to propel this large body. The entire lineup comes standard with a 6-speed automatic transmission, enhancing shift smoothness and fuel efficiency.
4
2
Share

Can motorcycles drive on highways?

According to legal regulations, motorcycles driving on highways is completely reasonable and lawful. Here are the relevant details: Regulations: Pedestrians, non-motor vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailer trucks, and other motor vehicles with a designed maximum speed below 70 kilometers per hour are not allowed to enter highways. From this perspective, motorcycles are actually not included. Although legally motorcycles can drive on highways, in reality, it is still very difficult for motorcycles to do so. Motorcycle Ban: Due to the influence of motorcycle bans, some highway toll stations do not allow motorcycles to enter, and policies vary across different provinces and cities. Generally, motorcycle bans are more commonly implemented in some southern cities in China, such as many cities in Fujian, Jiangsu, and Guangdong provinces, where motorcycle restrictions are in place. In contrast, in central and western cities of China and regions with more complex terrain like Chongqing, the implementation of motorcycle bans is less strict, and motorcycles driving on highways are relatively more common in these areas.
9
2
Share

What is the meaning of the triple 777 license plate number?

A license plate is the unique identifier of a vehicle. Traffic police can use it to access the owner's information and the vehicle identification number (VIN). The license plate itself holds no other meanings. The 777 sequence is considered a special license plate number, which is relatively harder to obtain in real life. The process for registering a new vehicle's license plate is as follows: Obtain the vehicle certificate: The vehicle certificate is crucial, as it is a mandatory document for registering a license plate. Currently, some car dealerships (4S shops) delay handing over the vehicle certificate, which may postpone the registration process. Therefore, it is important to obtain the vehicle certificate as soon as possible by maintaining frequent communication with the 4S shop. Register and inspect the vehicle at the DMV: Once all the required documents are ready, you can proceed to the Department of Motor Vehicles (DMV) to apply for a license plate. First, a specialized traffic police officer will inspect the vehicle, primarily checking the vehicle identification code, exterior appearance, and the warning triangle sign, among other things. Make sure to prepare these in advance.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.