···
Log in / Register

Where is the cabin air filter located in a Nissan Qashqai?

1 Answers
Val
09/06/25 4:25am

The cabin air filter in a Nissan Qashqai is located near the left foot area of the front passenger seat. When replacing the cabin air filter, first remove the fastener by gently pressing it toward the front of the vehicle to avoid breakage, then proceed with the replacement. Below are the steps for replacing the cabin air filter in a Nissan Qashqai: 1. Remove the decorative panel on the right side of the driver's seat; it's easier to start from the top and work downward. 2. The replacement method is the same for both the 2008 and 2010 models. The white obstruction in the 2010 model does not affect filter replacement. The filter cover is attached to gray sealing foam with a handle in the middle. The bottom of the cover has a clip; gently pull it with your finger to remove the cover. 3. Once the cover is removed, you can pull out the cabin air filter. Note: The filter has a front and back side. While OEM filters have markings indicating the front and back, aftermarket filters typically have an extra thin material on one of the short edges of the frame. The correct installation direction is with this extra material facing outward at the top. 4. Installing the filter can be challenging due to the awkward position. You can bend the filter toward the front of the vehicle and, after fully inserting it, pull it back and forth a few times to ensure it's properly seated. Finally, reattach the cover to complete the process.

Was this review help?
6
4
Share
More Forum Discussions

Why Did Changan Suzuki Stop Selling?

First, the slow pace of model updates is the primary reason. The reason why Suzuki's models are well-known to most consumers is mainly due to the excessively long sales period of each model. For example, models like the Alto, Swift, and SX4 sometimes only needed a change in body color to be marketed as an annual facelift. In recent years, as domestic consumers' demands for vehicles have increased, Suzuki's strategy has become ineffective. Although models like the Vitara and S-Cross were launched later and received positive market feedback, the pace of new model releases remained too slow compared to mainstream domestic car brands. Secondly, Suzuki was too "stubborn" about space and configurations. Domestic consumers have very high demands for space and configurations. Many models have extended their interior space to meet these demands, gaining consumer recognition and becoming mainstream best-sellers. In contrast, Suzuki's models, whether the early small cars or later compact family-oriented models, couldn't compete with mainstream models in terms of space. Moreover, the configurations of Suzuki vehicles are average compared to their peers. It's hard to find a Suzuki model that satisfies consumers in terms of features. Additionally, the interior materials and quality are at a disadvantage compared to mainstream models in the same price range. Finally, inflexible market strategies were evident with the later launch of the Vitara. Although the Vitara had strong product appeal and excellent design, there were no cash discounts at the retail level. Even before exiting the market, discounts were rare. Such pricing strategies ultimately led consumers to abandon the brand. Suzuki's exit is also related to the rapid development of the automotive market. Consumers' growing demand for models above the compact segment and the overall decline in vehicle prices left Suzuki models with no competitive advantage in the market.
17
2
Share

How to Remove Smoke Smell from the Car?

Methods to remove smoke smell from the car include: 1. Activated carbon is a commonly used adsorbent that can absorb various gaseous, colloidal, and particulate pollutants in the air. Activated carbon placed in the car should be replaced promptly; 2. An air purifier can filter out fine particles in the air and release negative ions to purify the air; 3. Place lemons, grapefruit peels, or sweet fruits like pineapple to cover the odor with their fragrance; 4. Open the car windows before getting in or when parked for a long time to allow air circulation; 5. Ozone disinfection is also a common sterilization method that can eliminate bacteria, viruses, and microorganisms that cause diseases in humans and animals.
16
1
Share

Where is the steering angle sensor installed?

The steering angle sensor is installed at the bottom of the steering column. The automotive steering angle sensor is used to detect the rotation angle and direction of the steering wheel. Whether turning left or right, it will be detected by the steering angle sensor, and the vehicle's electronic control unit will issue the correct steering command. The rotation angle of the steering wheel provides the basis for the vehicle's steering amplitude, ensuring the car follows the driver's steering intentions. The steering wheel angle sensor is applied in the vehicle dynamic stability control system, where its stability and accuracy are directly related to driving safety. It incorporates all the functions of the ABS system and can actively brake when the vehicle loses stability, thereby enhancing driving safety to a certain extent.
1
1
Share

How to Use the Headlight Washer

The method to use the headlight washer is: 1. Turn the headlight switch to the far right; 2. Pull the right-side wiper lever toward you; 3. The headlight washer and the windshield washer will operate simultaneously; 4. There are water outlets below the headlights, allowing you to clean dust and dirt from the headlights at any time. Car headlights, also known as car front lights or car LED daytime running lights, serve as the 'eyes' of the car. They not only relate to the owner's external image but are also closely linked to safe driving at night or in bad weather conditions. The use and maintenance of car headlights should not be overlooked. 'Light language' is used during nighttime driving—correct use of light language can help avoid accidents and serve as a 'reminder' or 'warning.'
12
4
Share

How to Adjust the Pressure of a Pressure Relief Valve?

Pressure relief valve adjustment method is as follows: 1. Open the angle needle valve; 2. Loosen the positioning nut and turn the top adjusting screw counterclockwise; 3. Open the front-end water inlet (gate or butterfly) valve; 4. According to the pressure gauge, tighten the top adjusting screw clockwise as required, and start the water pump to verify the high pressure; 5. Adjust the angle needle valve to stabilize the pressure as much as possible, turn off the water pump to verify the fully closed pressure, and lock the positioning nut. The pressure relief valve, also known as the safety valve, automatically opens and closes according to the working pressure of the system. It is generally installed on the equipment or pipeline of a closed system to protect the system's safety. When the pressure reaches the upper safety limit, the pressure relief valve automatically opens to reduce the pressure and ensure safety.
9
2
Share

What is the age limit for using child safety seats?

Child safety seats must be used for children under 4 years old, and children under 12 years old are not allowed to sit in the front passenger seat. Child safety seats, also known as child restraint systems, are specially designed for children of different ages (or weights) and installed in vehicles to effectively improve children's riding safety. Child safety seats can be fixed to motor vehicles and consist of safety belt components with buckles or flexible parts, adjustment mechanisms, accessories, etc., forming a child safety protection system. They can be combined with additional devices such as portable cribs, infant carriers, auxiliary seats, or collision protection devices.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.