Where is the cabin air filter located in a Mercedes-Benz Smart?

1 Answers
SanJohn
07/30/25 4:18am
Mercedes-Benz Smart's cabin air filter is located on the right side of the accelerator pedal. By bending down, you can see the cover plate of the cabin air filter. Remove the cover plate to take out the cabin air filter. The functions of the cabin air filter are: 1. Ensuring clean air in the cabin without bacterial growth; 2. Separating solid impurities such as dust, pollen, and grinding particles from the air; 3. Ensuring the filter fits tightly against the housing to prevent unfiltered air from entering the cabin. Taking the Smart Forfour as an example, its dimensions are 3495mm in length, 1665mm in width, and 1554mm in height, with a wheelbase of 2494mm, and it features a rear-engine, rear-wheel-drive layout.
Was this review help?
12
5
Share
More Forum Discussions

What engine does the Mustang have?

The Mustang is equipped with a 2.3T turbocharged engine and a 5.0L naturally aspirated engine. The 2.3T engine delivers a maximum power of 220 kW and a peak torque of 434 Nm, while the 5.0L engine produces a maximum power of 343 kW and a peak torque of 556 Nm. The Mustang is a performance sports car launched by Ford. In terms of appearance, the front face of the Ford Mustang features a large grille, which better highlights the car's sporty character. From the side view, the Mustang adopts a continuous waistline design that visually elongates the car's profile, further emphasizing its dynamic and sporty essence.
11
5
Share

What is the impact of oxalic acid on the three-way catalyst?

Oxalic acid may weaken the purification effect of the three-way catalyst, leading to issues such as increased emission pollution, primarily due to improper cleaning. The oxalic acid solution should be mixed with water at a ratio of 1:10; otherwise, it may damage the three-way catalyst. Steps for cleaning the three-way catalyst with oxalic acid: 1. First, use a lift to raise the vehicle and completely remove the three-way catalyst. 2. Soak and clean the three-way catalyst with the oxalic acid solution, then rinse it with clean water. 3. Reinstall the cleaned three-way catalyst into the vehicle and start the engine for testing.
12
3
Share

What Does Tire Specification Indicate?

Tire specification indicates the width, aspect ratio, type of the tire, and the applicable size of the tire. Taking the tire specification 185/60R14 as an example, 185 indicates that the width of the tire is 185mm, 60 indicates that the percentage of the tire's section height to its width is 60%, which is the aspect ratio of the tire, R stands for radial tire, and 14 indicates that the rim diameter is 14 inches. Tires with a larger aspect ratio will have better comfort and lower noise, while tires with a smaller aspect ratio will have poorer comfort and higher noise. Some tires with a smaller aspect ratio, when passing over speed bumps or uneven road surfaces at higher speeds, are prone to bulging on the sidewalls. Therefore, owners using low-profile tires need to pay attention to reducing speed when encountering speed bumps or low-lying road conditions.
1
0
Share

Where is the engine oil dipstick for the Audi A4?

Audi A4 engines do not have a physical oil dipstick. The oil level is displayed electronically. Press the 'car' button and select the oil level under the maintenance menu to check it. The function of an oil dipstick is to measure the static height of the oil level, thereby indicating whether the engine oil volume is within a reasonable range. The Audi A4 offers three engine displacement options: 1.8T, 2.4, and 3.0. The 1.8T comes in four variants: Manual Basic, Automatic Basic, Comfort, and Technology Leading. The 2.4 displacement is available in three variants: Comfort, Comfort Sport, and Comfort Premium. The 3.0 displacement has only one variant, which is equipped with the quattro all-wheel-drive system.
20
2
Share

Is Throttle Body Cleaning Necessary?

Throttle body cleaning is necessary. After prolonged use, carbon deposits will accumulate near the air flow valve plate of the throttle body. In severe cases, it can even clog the preset idle air intake opening. These issues can lead to sluggish throttle response, unstable idle speed, or even engine stalling. Therefore, the throttle body needs to be cleaned. Cleaning the throttle body every 20,000 to 40,000 kilometers is sufficient. If the driving conditions are harsh, the cleaning interval should be shortened. However, excessive cleaning can cause premature failure of the throttle body. Frequent cleaning gradually removes the special coating inside the throttle body chamber. Without this coating, the chamber becomes more prone to oil and grime buildup, creating a vicious cycle that ultimately leads to failure.
1
4
Share

Can Antifreeze Be Mixed?

Antifreeze cannot be mixed. Although the main components of domestic antifreeze are the same, the additives used by different manufacturers vary. To distinguish between types, various colorants are added, such as light green, green, light blue, dark blue, pink, orange-red, red, etc. If mixed, different additives may undergo chemical reactions, which can have adverse effects on the radiator. Antifreeze should be added between the MAX and MIN indicator lines. Many people think antifreeze is only used in winter, but in fact, it is used year-round. Automotive antifreeze is mainly used in the cooling systems of liquid-cooled engines, offering excellent performance in preventing freezing in winter, boiling in summer, scale buildup, and corrosion.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.