Where is the cabin air filter located in a Lexus?

How to Adjust the Sound Quality in Golf 7?

To adjust the sound effects in the Golf 7, simply locate the audio settings option on the central control screen and configure the sound effects. Compared to the Golf 6, the original audio system in the Golf 7 Automatic Luxury Edition has seen slight improvements. For owners who do not have high demands for sound quality, the 8-speaker setup is quite decent, at least visually appealing. More details are as follows: 1. The Golf 7 is a compact car under the Volkswagen brand, which has achieved excellent sales in China and is very popular among young consumers. 2. The Golf 7 is equipped with three types of engines: a 1.2-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 1.6-liter naturally aspirated engine. 3. The 1.2-liter turbocharged engine has a maximum power of 85 kW, a maximum torque of 200 Nm, a maximum power speed range of 5000 to 6000 rpm, and a maximum torque speed range of 2000 to 3500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 4. The 1.6-liter naturally aspirated engine has a maximum power of 81 kW, a maximum torque of 155 Nm, a maximum power speed of 5800 rpm, and a maximum torque speed of 3800 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. 5. The 1.4-liter turbocharged engine has a maximum power of 110 kW, a maximum torque of 250 Nm, a maximum power speed range of 5000 to 6000 rpm, and a maximum torque speed range of 1750 to 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission.

1

4

Share

How to Remove the Steering Gear of Baojun 730?

First, remove the tires and take out the cotter pin above the steering gear. The steering gear will automatically drop from the steering shaft. Loosen the large fixing screw of the steering gear, and then the steering gear can be removed. When installing, simply place the new steering gear back into its original position. More details are as follows: 1. In terms of appearance, the 2019 Baojun 730 adopts a combination design of a V-shaped full chrome grille, chrome window trim, and high-gloss black B-pillar, creating a strong sense of lines and making the vehicle look more rugged. At the same time, the floating roof design showcases an overall sporty and fashionable feel. The square dual-lens headlights at the front and the horizontal high-recognition smoked taillights echo each other, presenting a bold design. It features a 2+3+2 seating layout, providing a conventional luggage compartment space of 235L. When the second and third rows of seats are folded flat, it offers an ultra-large space of 2300L. 2. For the interior, the overall tone is gray, complemented by a dual-tone color scheme of beige and brown, creating a warm and elegant visual effect. The leather material with diamond-shaped perforations on the surface further enhances the texture. An 8-inch LCD screen is standard across all models, while higher-end variants are equipped with a 7-inch full-color LCD instrument system, a combination of a 7-inch full-color LCD instrument system and an 8-inch LCD entertainment system, which is rare in its class. In terms of smart connectivity, it features functions such as Carplay and the SSP-LINK in-car connectivity platform, supporting both Android and Apple systems, enabling seamless integration between the car and smartphones. 3. It is equipped with an oversized electric sunroof, greatly improving interior lighting. Additionally, it includes features such as power-folding exterior mirrors, Bluetooth phone and music, one-touch start + keyless entry system, independent air vents for front and rear rows, and USB charging ports for front and rear rows, ensuring that all family members enjoy comfortable and thoughtful care.

12

2

Share

What is the engine model of the Polo?

The Polo engine is produced by Shanghai Volkswagen and is a domestically manufactured engine. The engine model of the Polo is EA211-DMB, with a maximum power of 83kW, maximum torque of 145Nm, and maximum horsepower of 113. For daily maintenance of the Polo engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard being no lower than the requirements specified by the manufacturer. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing the oil to bypass through the bypass valve, bringing contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates out, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

18

2

Share

What transmission is used in the Cadillac XT4?

The transmission in the Cadillac XT4 is independently developed and produced by General Motors. SAIC General Motors Co., Ltd., established on June 12, 1997, is a joint venture between SAIC Motor Corporation Limited and General Motors Company. It has four major production bases: Pudong Jinqiao, Yantai Dongyue, Shenyang Beisheng, and Wuhan Branch, comprising four vehicle assembly plants and two powertrain plants, making it one of the significant enterprises in China's automotive industry. The Cadillac XT4 utilizes a 9-speed automatic manual transmission, which features eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission with added manual shifting capability. The purpose of this transmission is to enhance the driving pleasure of automatic vehicles. When using the Cadillac XT4's transmission in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Although many models now feature maintenance-free transmission oil, 'maintenance-free' does not mean it never needs replacement. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While many experienced drivers coast in neutral when driving manual transmission vehicles, doing so in an automatic transmission can cause overheating. Additionally, shifting back into Drive (D) mode may result in a noticeable jolt. Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Many drivers attempt to showcase 'smooth' operation by shifting into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other failures. Avoid frequently climbing steep slopes in Drive (D) mode. Automatic transmission vehicles often overheat under high loads or shift prematurely, leading to insufficient power when climbing steep slopes. In such cases, using manual mode to lock in lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Using a tow rope or towing the vehicle directly is not recommended.

18

0

Share

Where is the MG ZS engine produced?

The MG ZS engine is independently developed by SAIC Motor and belongs to the Blue Core Power series, making it a domestically produced engine. The 1.0T version of the MG ZS engine has the model number 10e4e, with a maximum horsepower of 125 and a maximum torque of 170Nm. The 1.5L version has the model number 15s4c, with a maximum horsepower of 120 and a maximum torque of 150Nm. For daily maintenance of the MG ZS engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale deposits not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.

4

5

Share

How Many Times Can You Take the Driver's License Subject 1 Exam?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 exam can be taken twice. If you fail the first attempt, you can retake it for free the second time. If you still fail the second attempt, the Subject 1 exam is terminated, and you can only schedule another exam after ten days. There is no limit to the number of retakes. In principle, as long as the driver's test registration is valid (3 years), there is no restriction on the number of retakes. Subject 1, also known as the Subject 1 theory test or driver's theory test, is part of the motor vehicle driver's license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is computer-based and has a time limit of 45 minutes. A passing score for Subject 1 is 90 points. The test consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point (total score: 100). If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the session. Subject 1 exam topics include: driver's license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: During the exam, candidates must dress appropriately (no slippers), and electronic devices and bags are not allowed in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the exam room. Inside, verify your identity at the assigned station, locate your seat, and begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After completion, queue to collect your score report and sign it—unsigned reports are invalid. There is no limit to the number of times you can schedule the Subject 1 exam. Each subject exam can be taken once, with one retake if you fail. If you do not take the retake or fail it, the exam is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, there are only five exam attempts. Subject 2 and Subject 3 exams must be scheduled ten days later. If you fail the Subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. The driver's test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (under the Ministry of Public Security’s Order No. 123) does not include "Subject 4."

4

Share

Where is the cabin air filter located in a Lexus?

How to Adjust the Sound Quality in Golf 7?

How to Remove the Steering Gear of Baojun 730?

What is the engine model of the Polo?

What transmission is used in the Cadillac XT4?

Where is the MG ZS engine produced?

How Many Times Can You Take the Driver's License Subject 1 Exam?

How to Replace the Battery in a Mercedes C55 Key?

What Causes the Bad Smell Inside the Car?

How to Choose Between BMW 3 Series and 5 Series?

How to Clean a Dirty Car Roof Liner?