Where is the cabin air filter located in a Jetta?

2 Answers
CooperMarie
07/24/25 12:14am
The cabin air filter in a Volkswagen Jetta is located at the lower left side of the front passenger seat. Below are the functions of the cabin air filter: 1. It helps filter out fine impurities and dust inside the vehicle, providing a more comfortable and superior cabin environment. During engine operation, a large amount of outside air is required, which inevitably draws in impurities. The cabin air filter removes these impurities and microorganisms from the air. 2. The recommended maintenance interval for the cabin air filter is every 20,000 kilometers or once a year. If the vehicle is frequently used in areas with severe smog, it is advisable to replace the filter more frequently as needed. Using an original activated carbon filter from the manufacturer can provide better results. It is also recommended to replace the cabin air filter at the start of spring and autumn each year to coincide with seasonal changes.
Was this review help?
10
3
Share
AnnieRose
08/10/25 8:01pm
I've been driving my Jetta for many years and always change the cabin air filter myself. The location is very clear - right behind the glove compartment on the passenger side. Removing the glove box is easy, just pinch the clips on both sides and pull it down. Then you'll see a plastic cover, open it to pull out the old filter. When replacing, pay special attention to the arrow direction - align it properly before inserting the new filter. My Jetta runs over 20,000 kilometers a year, so I change the filter every six months without fail, otherwise the air blows out full of dust. Especially before and after the southern rainy season when mold grows most easily. Spending a dozen yuan on a good activated carbon filter can both filter dust and absorb odors. Changing it before using the AC in summer makes the air much fresher.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

What Documents Are Needed for the First Maintenance of a New Car?

The items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle registration book; vehicle purchase invoice, to be taken to the designated first maintenance facility for the vehicle's first service. Important note: make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after the new car has been driven, with the specific time varying by vehicle, generally after driving 5,000 kilometers or 6 months. The car needs to participate in the first maintenance in time, neither early nor delayed. The realization of the first maintenance marks the end of the car's break-in period, and it can now be driven according to the standard load and normal speed required by the vehicle. The time for the first maintenance is calculated from the date of picking up the car. There are two indicator values for the first maintenance time: mileage and time. Whichever indicator is met first will be taken as the standard. The first maintenance items include: oil change, oil filter replacement, cleaning the air filter, checking various oil levels for normalcy, inspecting the generator belt, checking for damage to the wiper blades, checking tire pressure for normalcy, and inspecting the tires for damage or bulges, etc. Time required: it takes about 2 hours to complete all the work. The most important part of the first maintenance for a new car is the oil and oil filter replacement. When changing the oil, the oil filter must be replaced together, and the choice of oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people will organize and clean their cars themselves during holidays, rinsing the car body with water and scrubbing with a cloth. Here, it is important to remind that the interior of the car body does not need to be directly rinsed with water. If the floor mats are dirty, you can use a vacuum cleaner or take them out, brush and wash them with detergent, dry them, and then put them back. There are many through-holes in the grooves under the rubber mats on the floor of the driver's cabin. If water enters, it will not dry by wind but will flow through the holes to areas like the gearbox, causing erosion and corrosion. The better practice is to clean with a vacuum cleaner and then scrub with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is in short supply, it is recommended that you drain the antifreeze as soon as possible and add the same brand of antifreeze from the beginning. Because the chemical functions of antifreeze vary greatly by brand, and different brands use different corrosion inhibitors. Do not mix them to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When the bolts on a moving car rust, they are usually oiled to make them work properly again. To prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to them, but this brings necessary risks to safe driving. When the car is driving at high speed, the bolts and nuts can be easily loosened or even fall off, leading to driving malfunctions.
9
2
Share

What does it mean when the engine yellow light stays on?

When the engine yellow light stays on, it indicates a fault in the engine. It is recommended that the owner immediately take the vehicle to a 4S shop for inspection and repair. The engine, often referred to as the heart of the car, is responsible for providing power. When the engine warning light comes on, it doesn't necessarily mean there is a serious issue with the engine itself; it could also be caused by a malfunction in the sensors or other components around the engine. Reasons for the engine warning light to illuminate: 1. Poor-quality fuel or excessive engine carbon buildup, leading to poor combustion; 2. Faulty oxygen sensor in the engine; 3. Clogged fuel injectors or intake valves due to carbon buildup.
13
5
Share

What is the difference between Shelby and Mustang?

The difference between Shelby and Mustang lies in their engines: Shelby utilizes Mustang's 2.3-liter turbocharged engine but has undergone optimization and tuning based on the original Mustang; the Mustang employs two engines, namely a 2.3-liter turbocharged engine and a 5.0-liter V8 naturally aspirated engine. Shelby is a sports car produced by Ford, named after its designer, with the full name being Mustang Shelby. It boasts a very aggressive appearance, primarily designed as a sports car type, with smooth lines throughout its exterior, resembling a wild horse about to gallop, and it also delivers outstanding performance in terms of power.
18
3
Share

How to Fix Front Wheel Brake Lock on Chevrolet Cruze?

There are three solutions for front wheel brake lock on Chevrolet Cruze: 1. Force start the engine and stomp on the accelerator pedal—just enough to get the rear wheels moving; 2. Remove the tire and tap the brake drum with a hammer or similar tool a couple of times to loosen the contact surface between the brake drum and brake pads; 3. If the brake master cylinder cup is stuck and not retracting, the solution is to clean the entire brake system and replace the brake master cylinder cup. When the front wheels lock, the car will essentially move forward in a straight line, maintaining stability but losing steering control. This means the driver cannot avoid obstacles or pedestrians during braking or perform necessary steering maneuvers on curves. If the rear wheels lock, the braking stability of the car deteriorates, and even a small lateral disturbance can cause dangerous phenomena like fishtailing or spinning.
8
2
Share

At what RPM should a car start moving?

The car can start moving as long as the RPM does not exceed 3000. When the car's RPM reaches 1250 and then drops by 800 RPM, it indicates that the engine has warmed up sufficiently, and you can proceed to drive. If the car doesn't move, continuing to warm up the engine will only increase fuel consumption. Especially in winter, when the vehicle has been parked for a long time, the engine oil or other fluids may settle. Starting the car without proper warm-up can lead to significant wear and tear on components due to insufficient oil distribution. While skipping the warm-up process for short periods may not cause immediate issues, prolonged neglect can result in engine shaking and even cylinder scoring.
11
5
Share

What size tires can be used on 14-inch rims?

Suitable tires for 14-inch rims can be installed, but the specific size depends on the tire's aspect ratio. The aspect ratio of a tire is the ratio of the tire's height to its width. The lower the aspect ratio, the better the tire quality. If the tire tread is very narrow and the diameter is large, such tires will not only affect the car's handling but also compromise safety because the tire's contact area is small, resulting in poor wear resistance. To improve the car's handling, you can appropriately increase the tire width, which also enhances the car's aesthetics. After modifying the rims, the tire's grip will increase, and the contact area between the tire and the ground will also expand, improving the car's cornering performance and braking performance, thereby enhancing driving stability.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.