Where is the cabin air filter located in a Ford Focus?

3 Answers
ElliottLynn
07/25/25 1:31am
Ford Focus's cabin air filter is located inside the glove compartment on the passenger side. Steps to remove the cabin air filter: 1. Open the passenger side glove compartment, gently press the two yellow buttons with your hands, then remove the lower housing; 2. After removing the housing, you will see another vertical housing, press the plastic clips on both sides of this housing with your hands and then remove it; 3. After removing this housing, you can see the cabin air filter. As Ford's best-selling compact sedan, the Focus has enhanced Ford's brand position in the global market with its excellent chassis and handling. The dimensions of the Focus are 4378mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm.
Was this review help?
6
2
Share
StEverett
08/11/25 11:21am
I've been driving a Focus for several years and often change the air conditioning filter myself. It's located behind the glove compartment on the passenger side. First, empty the glove compartment, then you'll see clips on both sides—just press them gently to remove the whole compartment. Once opened, there's a square plastic cover inside; unscrew the screws or press the clips, and the filter is hidden inside. This area collects a lot of dust, and if there's a strange smell when you turn on the AC, it's usually because the filter is dirty. I recommend replacing it every 10,000 kilometers or once a year. Choosing an activated carbon filter is better—it keeps the air inside the car fresher and prevents dizziness on long drives. Changing it yourself is quite simple; there are plenty of Focus filter tutorial videos online, so no need to waste money at the dealership. Just remember the location and be careful not to break the clips during removal and installation.
Was this review help?
1
5
Share
Expand All
MacMary
09/26/25 8:42am
I'm a car enthusiast myself and have tinkered with quite a few Focus models. The cabin air filter is usually fixed behind the glove compartment on the passenger side. The process is straightforward: open the glove box, remove all items inside, then press the plastic clips on both sides of the compartment and push to remove it entirely. At this point, you'll see a rectangular box—that's the filter housing. Lift the cover, pull out the old filter, and insert the new one. DIY replacement saves time and money. Don't listen to those who say to look under the hood—that's wrong! When choosing a filter, avoid cheap ones as they clog easily and reduce cooling efficiency. Replace it regularly for fresher air, especially if you have kids or family members with allergies. It's recommended to check every 8,000 kilometers—it's not complicated and takes about 20 minutes.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

How many points will be deducted for installing a tail box on a motorcycle?

Illegal modification of motorcycles will result in orders to restore the original condition, along with warnings and fines. The following is relevant information about motorcycle modifications: Relevant regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China", registered motor vehicles must apply for modification registration with the traffic management department of the public security authority under any of the following circumstances: changing the body color of the motor vehicle. Precautions: The appearance cannot be modified, the horn cannot be modified, and modifications must be legal. Illegal motor vehicle modification refers to modifications to the vehicle's appearance, power system, transmission system, or braking system that exceed the original design standards and are not permitted by national laws or approved by the manufacturer, including replacing key components. Article 16, Item 1 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that no unit or individual may assemble motor vehicles or alter the registered structure, construction, or characteristics of motor vehicles without authorization.
11
3
Share

How to Install Mudguards on the Nissan Sylphy?

The installation steps for the Nissan Sylphy mudguards are as follows: First, clean the car body; second, remove the original screws; third, align the mudguards with the car direction and tighten the screws to complete the installation. Here is an introduction to mudguards: As the name suggests, car mudguards are used to block mud. They are installed behind the four tires of the car, with the front two fixed on the left and right lower sills and the rear two fixed on the rear bumper. Their functions are as follows: 1. To prevent mud from splashing onto the car body, which would make the car look unattractive. 2. To prevent mud from splashing onto the tie rods and ball joints, causing premature rust. 3. Small stones can easily get stuck in the tire treads of a car, and when driving at high speeds, these stones can be flung onto the car body, chipping the paint. Mudguards can help prevent paint chipping to some extent.
16
3
Share

Where is the Previa engine number located?

The Previa engine number is located at the rear of the engine. It is situated at the junction between the timing cover and the cylinder block. For the 6-cylinder version, it's on the side closest to the firewall. Typically, it consists of a 7 to 8-digit combination of numbers and letters. In addition to the above method, the engine number can also be found through the following 4 ways: The vehicle registration certificate displays the engine number, usually on the second last line; The motor vehicle registration certificate records the engine number; The car purchase invoice states the engine number; The vehicle purchase tax payment certificate indicates the engine number. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be identical. The engine number, however, refers to the production serial number of the engine. Each engine can only have one unique engine number, and no two engines share the same number.
4
0
Share

Where is the reverse light switch located on a Prado?

The reverse light switch is located on the transmission. The position varies depending on the engine type, so you may need to locate it yourself. Reverse lights: Reverse lights are installed at the rear of the vehicle to illuminate the road behind and alert vehicles and pedestrians that the car is reversing. All reverse lights are white. Method for replacing reverse lights: Open the trunk and pry open the black plastic cover at the right rear taillight. The cover is usually secured with plastic clips. After removing the cover, you will see two fixing screws. Use a wrench to remove and set them aside. Next, remove the entire taillight assembly by pushing it firmly to the right side of the vehicle while holding it to prevent dropping, as it is secured with clips. Once the taillight is removed, locate the reverse light. Without disconnecting the plug, rotate it counterclockwise to remove it, then install the new reverse light.
13
3
Share

Is the Civic a Japanese car?

Honda Civic is a Japanese car, with domestic versions available. The Honda Civic is a model under the Honda brand. Since the birth of the first-generation CIVIC (Civic) in 1972 (as of March 1, 2020), it has undergone 8 generations of inheritance and 40 years of experience. In 2006, the eighth-generation CIVIC (Civic) officially entered China. Relevant information about joint-venture cars is as follows: 1. Introduction: A project jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, and capital; foreign investors provide the brand, technology, capital, talent, etc. Joint-venture cars are the products of such collaborations. Foreign parties provide technology, talent, brand, etc., for domestic assembly, but the core technology is still controlled by the foreign side. 2. Joint-venture brands under the FAW Group include: FAW-Volkswagen, FAW-Audi, FAW-Mazda (all produced in Changchun, Jilin), and FAW-Toyota (produced in Changchun, Jilin; Tianjin; and Chengdu, Sichuan).
5
0
Share

Why can't the 3rd gear of the Baojun 560 manual transmission suddenly engage?

Manual transmission can't engage gears for the following reasons: Incorrect gear position: When starting an automatic transmission car, the gear must be placed in P or N position. If placed in R or D position, the car will not start. Some manual transmission cars will also not start if the clutch is not depressed. No antifreeze added: Some car owners add water or inferior antifreeze to their cars, resulting in the entire water circuit freezing in extremely cold winter conditions, causing the engine to crack, the car water pump to fail to operate, the car not to start, and damage to other engine components. Gear lever assembly failure: The internal gears of the gear lever are worn, causing the gear lever to get stuck, making it very difficult to pull back and forth, resulting in the inability to shift gears and difficulty in shifting.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.