···
Log in / Register

Where is the cabin air filter located in a BMW X1?

5 Answers
DelAlexis
07/24/25 2:40am

BMW X1's cabin air filter is located in the engine compartment, near the wiper position. Below is the cleaning method for BMW X1's cabin air filter: 1. If the filter is very dirty, use compressed air to clean it from bottom to top. 2. Keep the air gun 5cm (centimeters) away from the filter and blow at 500kPa (kilopascals) for about 2 minutes. 3. If the cleaning effect is not achieved, please have the dealer clean or replace it. Below is the replacement method for the cabin air filter: 1. Remove the 6 screws marked in the circle. 2. After removal, the cabin air filter can be seen and replaced. 3. Pay attention to the direction during installation, and check if it is properly and securely installed after completion.

Was this review help?
12
4
Share
Clayton
08/10/25 9:45pm

I own a BMW X1 and often replace parts myself. The cabin air filter is located under the passenger side footwell or behind the glove box. You'll need to remove the glove box first, which is usually secured with a few screws. Once opened, you'll see the filter housing - just pull it out and replace it with a new one. BMW's design is decent, not too complicated. I recommend replacing it every 10,000-20,000 km or once a year. If left unchanged for too long, dust accumulates in the car, the AC airflow slows down, and odors develop, which affects health. DIY replacement can save you a few hundred bucks. You only need basic tools like a screwdriver and socket set. Online tutorials are detailed - just be careful not to yank connectors forcefully to avoid damaging wires. Regular maintenance ensures fresh cabin air, especially important for families with children.

Was this review help?
10
0
Share
Expand All
MacCharles
09/24/25 4:22am

As a newbie driving an X1, I'm just getting familiar with car maintenance. The cabin air filter is located under the front passenger seat near the kick panel – you'll need to move the floor mat aside or access it through the glove compartment area (behind the storage box). The replacement process isn't difficult, but being a novice, I asked a friend to guide me through it once: First empty the glove compartment, gently release several clips (don't use excessive force), and the filter housing will be exposed. Just slot in the new filter – materials are cheap online, roughly a few dozen yuan each. This component is easily overlooked in daily use, but delayed replacement can cause musty odors from the AC, especially noticeable during rainy seasons, which affects driving comfort. I also learned it filters pollen and dust, and regular replacement can extend the AC system's lifespan. I'd recommend checking it every six months to maintain proper ventilation.

Was this review help?
9
1
Share
Expand All
AustinLee
11/07/25 6:34am

I enjoy taking care of my car as if it's a family member. The BMW X1's cabin air filter is hidden behind the glove compartment on the passenger side, simply put, inside the panel near the passenger's legs. I've changed it myself once—just remove the glove box and it's done in a few steps, then slot in the new filter. This part is crucial as it filters air pollutants, especially in cities with high PM2.5 levels, reducing dust buildup inside the car. I make it a habit to replace it every year during the spring-summer transition—it only takes about 15 minutes, saving money and promoting health. If left unchanged for too long, the AC may hum loudly, airflow weakens, and the cabin air turns stale, potentially causing allergies. I recommend using genuine parts for better fitment. Take it easy during the process—follow tutorial steps carefully for disassembly and installation. Doing this well significantly improves the driving experience.

Was this review help?
15
2
Share
Expand All
ElenaRose
12/28/25 8:21am

I place great importance on regular car maintenance. The air filter for the BMW X1 is located behind the glove compartment on the passenger side. You'll need to remove the glove compartment assembly first, which usually doesn't have screws but relies on clips that can be gently pressed to release. The filter is inside and can be pulled out to replace with a new one. The replacement frequency depends on usage: for normal driving, change it once a year; if you frequently drive on dirt roads or in heavily polluted urban areas, check it every six months. Not replacing it has many drawbacks: a clogged filter reduces air conditioning efficiency, slightly increases fuel consumption, and worsens cabin air quality, especially during traffic jams when it feels stuffier. DIY replacement is convenient but make sure you have all the necessary tools and don't forget to prepare a new filter with the correct model number. Going to a 4S shop is also an option to save time, though they charge more. Remember, regular maintenance is key to avoiding major repairs.

Was this review help?
6
3
Share
Expand All
More Forum Discussions

What to Do If Zhonghua Cars Go Bankrupt?

Zhonghua Cars' after-sales service will be continued by the restructured company after bankruptcy. The following is an introduction to relevant knowledge about automotive after-sales service: 1. Automobile "Three Guarantees": The "Three Guarantees" refer to the regulations on repair, replacement, and refund for automotive product quality issues, namely the "Regulations on the Responsibility for Repair, Replacement, and Refund of Household Automotive Products" issued by the General Administration of Quality Supervision, Inspection and Quarantine of China, which has been implemented since October 1, 2013. 2. After-sales channels: Negotiating with dealers to resolve automotive quality issues is the most direct and commonly used method. According to the "Three Guarantees" regulations, if a vehicle has quality problems within the warranty period, it can enjoy free repair services; if a breakdown occurs during driving and the vehicle cannot continue, the 4S store needs to send someone to the scene for repairs. Related compensations, such as towing fees and repair times exceeding five days, should also be provided by the 4S store.
2
2
Share

How to solve the patina problem of Alcantara after long-term use?

Solutions for the patina problem of Alcantara steering wheel after long-term use are as follows: 1. Plastic steering wheel: You can use a cleaner to clean the plastic steering wheel. Prepare a damp towel, add cleaner to the damp towel, and then clean the steering wheel. After wiping, use a dry towel to wipe it again for basic cleaning. After cleaning, use a plastic care polish to extend its service life. 2. Leather or synthetic leather steering wheel: Special cleaners should be used for cleaning. Leather cleaning and softening agents are excellent choices. At the same time, after using the leather cleaning and softening agent, you should also choose a leather protective polish to gently wipe. This way, whether the steering wheel is made of genuine leather or synthetic leather, it will have a good gloss.
11
3
Share

Where is the blower relay located in the Buick Excelle?

Behind the fuse box in the cabin. Below is additional relevant information: 1. Introduction to the Buick Excelle: The Excelle (Buick-Excelle) is based on General Motors' global platform. Its exterior design was created by Pininfarina, one of the world's top three automotive design companies with a 73-year design history. In 2003, the Excelle, known as the "mid-sized Buick," was launched. Shanghai GM officially entered the highly potential mid-size car market by introducing the "Buick Excelle" based on a new product platform. 2. Relay: An electronic control device that consists of a control system (also called the input circuit) and a controlled system (also called the output circuit), commonly used in automatic control circuits.
12
5
Share

How to Clean a Car Condenser?

Cleaning the condenser can be done by directly rinsing it with a water hose, as keeping the surface of the car condenser clean helps dissipate heat more effectively. Regularly cleaning the condenser surface can significantly improve the cooling efficiency of the air conditioning system. The following aspects are essential for maintenance. 1. Check the refrigerant level: Observe the refrigerant level using the dryer's sight glass. The sight glass is usually installed on the dryer's cap. Run the engine and the air conditioning system, and observe the refrigerant flow through the sight glass. If the air conditioning system is working properly, you should see clear refrigerant continuously flowing, occasionally with small bubbles during high temperatures, and small bubbles visible when the system is turned off. 2. Check if the refrigerant is sufficient by visiting a repair shop regularly for inspection: You can estimate the refrigerant level by feeling the temperature difference between the inlet and outlet pipes of the dryer or by using a manifold pressure gauge. Additionally, check for oil stains at the hose connections of the air conditioning system. If any leaks are found, address them promptly at a repair shop. 3. Inspect the compressor belt: If the belt surface and the pulley groove contact side appear shiny and there is a squeaking noise when starting the air conditioning, it indicates severe belt slippage, and the belt and pulley should be replaced. If the belt is too loose, adjust it; otherwise, it may lead to poor cooling performance of the air conditioning system.
4
0
Share

How to use the dash cam in Haval H6?

After powering on, press the mode button to select the preview mode, use the up/down buttons to choose a video file, press the OK button to play or pause, and press the mode button to exit. Below is some relevant information about dash cams: 1. Introduction: Dash cams are mainly divided into two categories: portable dash cams and integrated rear-installed DVD dash cams. Portable dash cams can be further divided into rearview mirror dash cams and data dash cams. These types of dash cams are characterized by good concealment, easy installation, detachability, low cost, and simple operation. 2. Precautions: While the vehicle is in motion, the dash cam can record videos and audio, which can serve as evidence when necessary. When used as evidence, the video footage must not be edited, as edited footage is considered invalid evidence.
13
1
Share

Where is the jack located on the Leiling?

The jack of the Leiling is located about 10-20 centimeters forward from the rear wheels. Here are some precautions for using the jack: 1. When the vehicle is lifted by the jack: Do not start the engine, as the vibration of the engine or the rotation of the wheels may cause the vehicle to slip off the jack, posing a danger. 2. For various car models: To ensure safety, there are generally fixed positions for using the jack. Do not use the jack to support the bumper, crossbeam, or other parts. 3. Maintenance personnel: Never work under a vehicle that is not properly supported. When changing wheels, passengers should not stay in the car, as their movements may cause the vehicle to slip off the jack. 4. When replacing the outer tire of dual wheels: You can park the inner wheel on a block or stone of appropriate height to suspend the outer tire for replacement. Make sure to tighten the handbrake and secure the front wheels. 5. When replacing front or rear tires: Use stones or bricks to stabilize the front axle and rear bridge of the vehicle. Dig a pit under the tire to be replaced to suspend it for replacement.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.