Where is the cabin air filter located in a BMW GT?

How to Remove a Car Half Shaft?

And support with a jack. Remove the wheel and tire assembly. Remove the brake caliper assembly. Remove the cotter pin from the drive axle. Use a removal tool to detach the tie rod end ball joint from the steering knuckle. Remove the fixing nuts of the control arm to the steering knuckle and ball joint. Drain the drive axle lubricant. Pull the hub/steering knuckle assembly to separate it from the car, so that the drive shaft can be separated from the drive axle. Use a wheel puller to press the drive shaft out of the hub/steering knuckle assembly.

4

5

Share

How to Clean the Fuel Injectors of a Geely Emgrand?

Methods for cleaning the fuel injectors of a Geely Emgrand: 1. Open the hood and use a Phillips screwdriver to remove the fixing screws of the fuel rail; 2. Disconnect the battery cables and remove the fuel injectors from the fuel rail; 3. Connect the fuel injectors to a homemade fuel injector plug and wire, then clean them with carburetor cleaner. The Geely Emgrand is a sub-brand under the Geely parent brand, equipped with a 1.3T GeTec DVVT turbocharged engine. In terms of body dimensions, it measures 4631mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm.

8

0

Share

Why can't you make a U-turn on white dashed lines?

Because making a U-turn on white dashed lines can easily lead to traffic accidents. White dashed lines indicate pedestrian crossings, which are signs for pedestrians to pass through. Here is the relevant information: 1. White dashed lines: When marked on road sections, they are used to separate traffic flows in the same direction or serve as safe driving distance identification lines; when marked at intersections, they are used to guide vehicle movement. 2. Situations where U-turns are allowed: At locations with designated U-turn openings, drivers should turn on the left turn signal in advance and make the U-turn without affecting other normal traffic; at intersections with U-turn signals, ensure the U-turn signal is green and make the U-turn only within the designated lane; at intersections with U-turn signs, make the U-turn based on actual conditions without obstructing other vehicles or pedestrians, and at intersections without explicit prohibitions against U-turns or left turns.

2

1

Share

How to Add Windshield Washer Fluid to the New Buick Excelle?

Method for adding windshield washer fluid to the new Buick Excelle: The windshield washer fluid filler port is located at the lower right corner of the engine compartment, with the cap marked with a washer symbol. The washer fluid capacity is 4L, and it should be appropriately refilled based on the remaining amount. Windshield washer fluid is only consumed during use, so there is no fixed refill interval - simply top it up when the level is low. The Buick Excelle is another masterpiece launched by the Buick brand following the new Regal, new LaCrosse, and Enclave, based on the "global platform, European and American technology." The new Excelle adheres to Buick's "dynamic and smooth" design language, drawing inspiration from the classic elements of the Riviera concept car, featuring a body design that combines sportiness with sophistication.

12

0

Share

Is It Necessary to Replace a Leaking Front Motorcycle Shock Absorber?

Motorcycle front shock absorber leakage requires replacement. Below is relevant information about shock absorbers: Introduction: A shock absorber (Absorber) is used to dampen the oscillations from spring rebound after absorbing shocks and impacts from the road surface. Widely used in automobiles, it accelerates the attenuation of frame and body vibrations to improve ride comfort. When traversing uneven roads, although the suspension springs can filter out road vibrations, the springs themselves still undergo reciprocating motion, and the shock absorber is employed to suppress this spring bouncing. Working Principle: Most shock absorbers used in automotive suspension systems are hydraulic shock absorbers. Their working principle involves the piston inside the shock absorber moving up and down when relative motion occurs between the frame (or body) and the axle due to vibrations, causing the oil in the shock absorber chamber to repeatedly flow from one chamber to another through various orifices.

19

3

Share

How to Repair Small Chips Caused by Stones on the Windshield?

You can purchase windshield repair fluid online and fix it yourself. Here is some relevant information about car windshields: Precautions: The windshield must be replaced correctly. To prevent air and water leaks, avoid washing the car for three days, and remove the tape securing the windshield position after three days. Drive smoothly and avoid sudden braking and rapid acceleration. Function: The reflection of passengers inside the car through the front windshield appears above the front of the car, while pedestrians on the road are in front of the car, allowing the driver to distinguish between passengers inside the car and pedestrians on the road. If the car's windshield is placed vertically, like a large flat mirror, it will reflect the passengers inside the car in front of the vehicle, obstructing the driver's view of pedestrians on the road and potentially causing illusions.

3

Share

Where is the cabin air filter located in a BMW GT?

How to Remove a Car Half Shaft?

How to Clean the Fuel Injectors of a Geely Emgrand?

Why can't you make a U-turn on white dashed lines?

How to Add Windshield Washer Fluid to the New Buick Excelle?

Is It Necessary to Replace a Leaking Front Motorcycle Shock Absorber?

How to Repair Small Chips Caused by Stones on the Windshield?

Is Replacing the Engine Crankshaft Thrust Washer Considered a Major Overhaul?

Are Manual Transmission Flooded Cars Harmful?

What does the six-year exemption for new vehicles mean?

How many kilometers should the timing belt of Elysee be replaced?