···
Log in / Register

Where is the cabin air filter located in a BMW 730?

3 Answers
DeStephanie
09/08/25 4:29am
Old model BMW 730 cabin air filters are located under the wipers in the engine compartment; new model BMW 730 cabin air filters are placed inside the glove compartment on the passenger side. The functions and types of cabin air filters are as follows: Cabin air filter functions: The cabin air filter supplies fresh air to the passenger compartment, effectively separating solid impurities such as dust, pollen, and grinding particles from the air, ensuring that drivers and passengers do not experience allergic reactions that could affect driving safety. Cabin air filter types: Based on filtration principles, air filters can be divided into several types: filtration type, centrifugal type, oil bath type, and composite type.
Was this review help?
14
0
Share
AndresDella
09/20/25 3:13am
The cabin air filter on the BMW 730 is located behind the glove compartment on the passenger side. I've driven this model before and changed it several times myself. Open the glove box door, and you'll find a small cover inside. Remove a few clips with a screwdriver to access the filter. The placement is quite logical since the air intake for the AC is above the passenger footwell, allowing the filter to directly intercept dust and debris. Be careful not to use excessive force to avoid damaging the plastic components. The cabin air filter tends to get dirty quickly, especially with frequent driving or in dusty areas. If you notice reduced airflow or unpleasant odors, it's time for a replacement. I typically check it every two years or after driving 15,000 kilometers to maintain fresh air quality, which is better for respiratory health. The replacement process takes only about 10-15 minutes, and buying parts online can save you a significant amount of money.
Was this review help?
20
4
Share
Expand All
DelMadelyn
11/03/25 3:36am
I've been driving a BMW 730 for some time, and the cabin air filter is typically located in the footwell area on the passenger side, specifically behind the glove compartment. You'll need to remove the glove compartment door first, usually by unscrewing a few screws, then locate a small panel—once opened, the filter will be exposed. When replacing it, be careful not to damage the clips; simple tools like a screwdriver will suffice. The filter significantly impacts AC performance. If left unchanged for too long, the air inside the car may feel stuffy or develop odd odors, potentially triggering allergies. I recommend replacing it every 1-2 years, adjusting based on driving conditions and seasons—for instance, more frequently in dusty areas or during intense heat. The location makes it easy to maintain, and even beginners can attempt a DIY replacement. However, if unsure, it's best to visit a professional shop—they can get it done in about ten minutes while also performing a full vehicle inspection.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

Why is the fuel consumption of Lavida over 10L/100km?

Here are the reasons for the high fuel consumption of Lavida: 1. Improper driving habits: Fuel consumption is closely related to the driver's habits, specifically manifested in not turning off the engine during prolonged idling or frequent ignition, aggressive acceleration or frequent braking, driving at high speeds in low gears or low speeds in high gears, etc. These driving habits significantly contribute to increased fuel consumption. 2. Abnormal tire pressure and tire wear: Low tire pressure increases friction between the tires and the ground, leading to greater resistance and higher fuel consumption. Normal tire pressure is around 2.5bar, which can be slightly reduced by 0.1bar in summer. Of course, tire pressure should not be too high either; it's best to inflate according to the vehicle's standard values. Additionally, if the tires are severely worn, frequent slipping can occur, which also increases fuel consumption. 3. Fuel quality and carbon deposits: Many car owners overlook fuel quality. Poor-quality gasoline can lead to increased carbon deposits, which roughen the intake pipe walls, affecting the intake efficiency and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, gasoline quality should not be ignored. Regular maintenance at a 4S shop is a forward-looking investment, not only ensuring the vehicle's normal performance but also inadvertently saving the owner from unnecessary future expenses.
18
0
Share

What is the process for registering an added spoiler?

First, it depends on whether the owner has changed the color of the vehicle. If the color has been altered, it is necessary to submit a modification application at the vehicle management office. After installing the spoiler, take clear photos of the vehicle. Once the spoiler registration is approved, the vehicle license must be re-photographed and replaced. If the spoiler was already installed when the license plate photo was taken, no additional procedures are required.
9
2
Share

Does mixing 92 and 95 octane gasoline have any impact on cars?

Mixing 92 and 95 octane gasoline occasionally has no impact, but try to avoid long-term mixing as their fundamental difference lies in the octane value, which represents anti-knock performance. The following are the hazards of mixing gasoline: If 92 and 95 octane gasoline are mixed for a long time, the high anti-knock function of 95 octane gasoline will not be fully utilized, and delayed combustion may occur. The ultimate consequence of this phenomenon is incomplete combustion, leading to increased carbon deposits in the engine. This has adverse effects on the normal operation and durability of the car engine, as it may cause the pressure in the engine cylinders to fail to meet the combustion requirements of the air-fuel mixture, leading to knocking. The engine may exhibit symptoms such as weak power output, increased fuel consumption, and other adverse effects. It may also shorten the lifespan of the car's ignition system, fuel injectors, and spark plugs, and increase exhaust pollution. The reason why different fuel grades are recommended for cars is that different vehicle engines have different compression ratios. Higher octane gasoline is not necessarily better; the appropriate gasoline grade should be selected based on the engine's compression ratio.
19
1
Share

What is the size of the Corolla wiper blades?

The Corolla wiper blade size is 26 inches (65CM) + 14 inches (35CM) as a pair. Below is relevant information about wiper blades: 1. Power source: The power source of the wiper blades comes from the motor, which is the core of the entire wiper system. The motor quality requirements for wiper blades are relatively high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque, and its output shaft drives the four-bar linkage mechanism, which converts continuous rotational motion into left-right swinging motion. 2. Working method: The wiper motor adopts a 3-brush structure to facilitate speed change. The intermittent time is controlled by the intermittent relay, utilizing the motor's return switch contacts and the charging-discharging function of the relay's resistor-capacitor to make the wiper blades sweep at a certain cycle. The wiper blade rubber is the tool that directly removes rainwater and dirt from the glass.
9
2
Share

Why was the Haima M6 discontinued?

Haima M6 was discontinued because the actual test results significantly deviated from the official data. The Haima M6 is a brand-new sedan that debuted at the 2013 Shanghai Auto Show, featuring a coupe-style exterior and equipped with the moofun in-car connectivity system. Below is an introduction to the Haima M6: 1. Interior: The interior design of the M6 is relatively common among domestic cars, especially in terms of color schemes. However, the addition of imitation wood grain decorative panels adds a homely touch to the cabin. It is considered average in its class, with mediocre cabin space. The new car comes with a four-spoke multifunction steering wheel, manual air conditioning, and other features. 2. Powertrain: The powertrain utilizes Haima's self-developed platform, including a 1.6-liter NG116 engine with a maximum power output of approximately 118 horsepower. It is paired with a 5-speed manual transmission. A 1.5T model was later introduced, marking Haima's first application of 'T' turbocharging technology.
15
2
Share

What is the fuel consumption of the old Mazda 3?

The Mazda 3 offers two engine options: 1.6L and 2.0L. According to statistics from Xiaoxiong Fuel Consumption, the fuel consumption range for 1,527 owners of the 1.6L+4AT model is 7.98-10.42L/100km; for 1,096 owners of the 1.6L+5MT model, it is 6.95-8.92L/100km; for 279 owners of the 2.0L+4AT model, it is 8.11-10.48L/100km; and for 369 owners of the 2.0L+5MT model, it is 7.58-9.88L/100km. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in constant-speed fuel consumption tests specified by national standards for certain types of vehicles. 2. Testing method: The test can be conducted on the road or on a chassis dynamometer, and the fuel consumption per 100 kilometers is then calculated using the 'flow meter method' or 'carbon balance method'.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.