Where is the cabin air filter located in a BMW 328i?

1 Answers
Maureen
07/30/25 3:52am
The cabin air filter in a BMW 328i is located inside the glove compartment on the passenger side. To replace the cabin air filter, you will need to remove the glove compartment. Function of the cabin air filter: When driving with the air conditioning on, the car draws in external air into the cabin. However, the air contains various particles such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. Without the cabin air filter, these particles can enter the cabin, not only contaminating the air conditioning system and reducing the performance of the cooling system but also causing allergic reactions, lung damage, irritation from ozone, and unpleasant odors, all of which can affect driving safety. Replacement interval for the cabin air filter: The replacement interval for the cabin air filter generally depends on the vehicle usage. For typical urban family cars, it is recommended to replace the filter every six months or once a year.
Was this review help?
4
0
Share
More Forum Discussions

What is the average speed of a car per hour?

There are significant differences between different car models, and speed also varies depending on road conditions. In urban areas, the average speed is generally 20 or 30 kilometers per hour, with a speed limit of around 40 km/h; in suburban areas, the average speed is usually 40 or 50 km/h, with a speed limit of 60 km/h; on highways, the average speed ranges from 80 to 100 km/h. Below is some related information: Origin of speed units: When British people say 100 mph, it equals 160 kilometers per hour. The term "speed in miles" originates from the unit "mile." Originally, one mile per hour was equivalent to approximately 1.6 kilometers per hour when converted to the metric system. Later, the metric system became internationally standardized. Units of car speed: There are two ways to express car speed: one is "kilometers per hour (Km/h)," and the other is "miles per hour (MPH)." Generally, Japanese, Korean, and most European car models use "kilometers per hour" to indicate speed, while the North American market typically uses "miles per hour." As for domestic car models, including the vast majority of imported models, they use "kilometers per hour" to express speed.
8
0
Share

What are the penalties for occupying roadways for construction?

Occupying roadways for construction will be ordered by the municipal engineering administrative department or other relevant authorities to make corrections within a specified time limit, and may be subject to a fine of up to 20,000 yuan; if losses are caused, compensation liability shall be borne according to law. Article 12 of the "Urban Road Management Regulations" states that occupying or excavating urban roads managed by the municipal engineering administrative department requires payment of urban road occupancy fees or urban road excavation and repair fees to the municipal engineering administrative department. The fee standards for urban road occupancy shall be proposed by the construction administrative departments of provincial or autonomous region governments or the municipal engineering administrative departments of municipal governments, and submitted to the finance and pricing authorities at the same level for approval; the fee standards for urban road excavation and repair shall be formulated by the construction administrative departments of provincial or autonomous region governments or the municipal engineering administrative departments of municipal governments, and submitted to the finance and pricing authorities at the same level for record. Violations of Article 27 of these regulations or any of the following acts will be ordered by the municipal engineering administrative department or other relevant authorities to make corrections within a specified time limit, and may be subject to a fine of up to 20,000 yuan; if losses are caused, compensation liability shall be borne according to law. III. Urban Road Management Regulations The Urban Road Management Regulations were formulated to strengthen urban road management, ensure the integrity of urban roads, fully utilize their functions, and promote urban economic and social development. They were promulgated by the Ministry of Transport. The regulations consist of 6 chapters and 45 articles, effective from October 1, 1996.
17
0
Share

What is the fuel consumption per 100 kilometers for Volkswagen?

The comprehensive fuel consumption of the Volkswagen Bora is 5.3-5.9L/100km. Currently, there are 15 models of the Volkswagen Bora on sale. The DSG Comfort Smart Edition and DSG Elite Smart Edition have a comprehensive fuel consumption of 5.3L/100km. The DSG Elite Smart Edition and DSG Luxury Smart Edition have a comprehensive fuel consumption of 5.5L/100km. The Automatic 30th Anniversary Edition, Automatic Comfort Smart Edition, Automatic Elite Smart Edition, Automatic Luxury Smart Edition, and Automatic Fashion Smart Edition have a comprehensive fuel consumption of 5.7L/100km. The Manual Fashion Smart Edition, Manual Comfort Smart Edition, Manual Fashion Type VI, and Manual Leading Type VI have a comprehensive fuel consumption of 5.8L/100km. The Automatic Fashion Type VI and Automatic Leading Type VI have a comprehensive fuel consumption of 5.9L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 5.3-8.8L/100km. When driving, the following five tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration and braking, early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, thereby improving fuel efficiency. By anticipating road conditions and using slow, even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units, relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Regular oil changes can reduce carbon buildup (carbon buildup can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
8
4
Share

Where is the rearview mirror heating switch for the Mercedes-Benz GLA?

The rearview mirror heating switch for the Mercedes-Benz GLA is located on the inner side of the driver's door handle. The heating knob switch can be rotated to three positions, with the left position being for rearview mirror heating. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—pressing the heating button activates it. No manual angle adjustment is needed, as the driver's side has a dedicated adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature (usually between 35-60 degrees Celsius) within minutes. Heat is then emitted from both left and right rearview mirrors. Simultaneously, as the temperature rises, water droplets on the mirror surface evaporate, and fog gradually dissipates, effectively defogging and deicing the mirror. However, in heavy rain, its effectiveness may diminish. Precautions for using the rearview mirror heating function: The heating function works by embedding electric heating wires in the rearview mirror, which consume significant power. Ensure the car is running when using this feature to avoid draining the battery, which could prevent the car from starting. Other methods for defogging rearview mirrors include: Opening windows slightly to allow air circulation, reducing the temperature difference between inside and outside the car, which helps dissipate fog. Adjusting the car's air conditioning to blow warm air onto the mirrors for defogging.
15
5
Share

Does passing through a yellow light count as running a red light?

According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," vehicles that have already crossed the stop line when the yellow light is flashing at an intersection may continue to proceed. If the yellow light is already on and you continue to force your way through, being caught on camera in such a situation will also count as running a red light. According to the relevant provisions in the "Procedures for Handling Road Traffic Safety Violations," motor vehicle drivers who violate traffic signal lights at intersections will be penalized with 6 points. Additionally, according to the relevant provisions in the "Road Traffic Safety Law," a fine may also be imposed. Criteria for determining running a red light: Electronic eyes capture three photos as evidence for running a red light: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered running a red light. When the red light is on and you cross the stop line, if you can stop the car even after crossing the line, it will not be considered running a red light, but it will be considered crossing the line and stopping. According to traffic laws, this is classified as driving or stopping at an intersection in violation of regulations, resulting in a 2-point penalty. How to avoid running a red light while driving: When there is an arrow signal light, follow the arrow light; otherwise, follow the circular light. When the red light is on, the front of the vehicle must not cross the stop line. When the yellow light is on, the front of the vehicle must not cross the stop line. When the green light just starts flashing, if you are close and moving fast, you should proceed, as stopping might be difficult and you could cross the stop line. If you are far away, moving slowly, or the intersection is congested, you should stop. When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line at an intersection.
10
4
Share

What does parking heater mean?

Parking heater is an independent auxiliary heating system in vehicles, which can be used after the engine is turned off or provide auxiliary heating function during driving, quickly raising the interior temperature, clearing fog and frost on windows and rearview mirrors, improving riding comfort and safety, and reducing engine wear during cold starts. The parking heater system overcomes the limitation of ordinary vehicle heating systems that rely on the engine, and can increase the speed of vehicle heating. Some types of parking heater systems also provide an engine preheating function, greatly improving the cold start performance of the engine, reducing engine wear during cold starts, and also improving vehicle fuel economy.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.