Where is the cabin air filter installed in the Nissan X-Trail?

2 Answers
ChristianRose
07/30/25 1:03am
Nissan X-Trail's cabin air filter is located under the glove box on the passenger side. The replacement steps are as follows: 1. Remove the glove box. 2. Open the cabin air filter cover. There are 3 clips on the top of the cover plate, press downward to release them. 3. Install the filter. Pay attention to the arrow direction on the filter and install it accordingly. Here's some relevant information: The cabin air filter can filter dust from the air and needs regular replacement. Generally, it should be replaced every 7,500-10,000 kilometers. It's best to replace the cabin air filter when seasons change between summer and winter to ensure clean air inside the vehicle. During routine car maintenance and cleaning, you can also remove the cabin air filter, clean off the dust, and dry it with a hair dryer.
Was this review help?
8
0
Share
NatalieLee
08/15/25 6:33am
Regarding the location of the Nissan X-Trail's cabin air filter, I found it right behind the glove compartment in front of the passenger seat. I've been driving this car for over five years, and the filter needs to be replaced during every maintenance. Remember to open the glove compartment first—there's a small switch or latch inside; just pull it out gently. After removing the glove compartment, you'll see a plastic cover. Remove the cover, and the filter is hidden there. It's actually quite convenient to replace it yourself. Just make sure the new filter is aligned correctly when inserting it; otherwise, airflow will be restricted. I recommend replacing it every six months because, after prolonged use, the filter accumulates dust and leaves, affecting the air quality inside the car and preventing discomfort while driving. It's best to turn off the air conditioning system before starting for safety. You can easily buy filters from roadside stalls for just a few dozen yuan, saving the cost of going to a repair shop.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

Should I buy the Mercedes-Benz E300 Fashion Edition or Luxury Edition?

The Mercedes-Benz E300L Fashion Edition and Luxury Edition models are identical in terms of performance. The differences lie in their exterior and interior designs, so the choice between the Fashion Edition and Luxury Edition depends on personal preference. The differences between the two models are as follows: 1. Comfort features: Compared to the Fashion Edition, the Luxury Edition adds an electric induction trunk opener; rear seats with electric adjustment and memory function; rear windshield sunshade and electric side window sunshades for the rear seats. 2. Multimedia: Both the Mercedes-Benz E300L Fashion Edition and Luxury Edition come with the Burmester sound system brand, but the Luxury Edition has five more speakers than the Fashion Edition, providing better sound quality and experience inside the car.
16
1
Share

How to Tell if a Car is Burning Oil?

Methods to determine if a car is burning oil: 1. Check if the exhaust pipe emits blue smoke; 2. Inspect the inside of the exhaust pipe for dirt; 3. See if there is carbon buildup on the spark plugs; 4. Check for corrosion and aging of the valve seals; 5. Determine if the fuel is burning completely. Engine oil is categorized by performance into full synthetic oil, semi-synthetic oil, and mineral oil. Engine oil is the lubricant used in engines, composed of base oil and additives. It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the deficiencies of the base oil, imparting new characteristics, making them an essential part of lubricating oil.
7
2
Share

Can a Car Still Be Driven If It Burns Engine Oil?

Yes, a car can still be driven if it burns engine oil, but only within certain limits. If the amount of oil burned exceeds the normal range, it is recommended that the owner have the vehicle repaired. The engine of a car has an oil pan, which is where the engine oil is stored. Engine oil naturally experiences some consumption, but excessive consumption indicates a problem with oil burning. Many factors can affect oil burning, such as fuel quality, driving conditions, driving habits, and maintenance practices. If excessive oil burning occurs, it can lead to the following issues: 1. Carbon deposits in the combustion chamber, causing the piston rings to stick and resulting in poor sealing; 2. Sludge formation in the lubrication system, which can clog the oil return holes of the oil control rings and reduce their scraping performance; 3. Wear between the pistons and cylinder walls, as well as corrosion and aging of the valve seals, leading to sealing failure.
4
4
Share

How to Clean Cement Off a Car?

Methods for cleaning cement off a car: You can use an acidic solution for cleaning, and common white vinegar will suffice. White vinegar is an acidic liquid that can effectively dissolve cement. Pour white vinegar onto the cement attached to the car, wait a few minutes for the cement to soften, and then it will be much easier to clean. However, multiple cleanings may be necessary to thoroughly remove it. Be meticulous and patient during the cleaning process, avoiding any rough scrubbing or scraping to prevent damage to the car's paint. Cement is somewhat corrosive and can harm the car's paint, so it should be dealt with promptly. If the cement hasn't hardened yet, you can wet it with clean water and rinse it off, then use a towel with cleaning solution to wash it. If the cement wasn't noticed and treated in time and has already solidified and hardened, an acidic solution will be needed for cleaning.
3
2
Share

What are the causes of abnormal engine noises?

Causes of abnormal engine noises include: 1. Aging or loosening of engine mounts: Their function is to reduce vibration and cushion the engine during operation. Once the mounts age or loosen, the engine will shake, resulting in abnormal noises; 2. Engine misfire noise: Excessive wear of pistons and cylinder walls leads to the clearance between them exceeding normal tolerance ranges, causing the piston skirt to impact the cylinder wall during engine operation; 3. Overly rich air-fuel mixture: When the engine's air-fuel mixture is too rich, symptoms include difficulty starting, poor acceleration after starting, uneven engine operation, black smoke from the exhaust, reduced engine power, and increased fuel consumption. These issues are often related to carbon buildup and clogged filters.
8
5
Share

What does 'sport' mean when it appears on the car?

When 'sport' appears on the car, it refers to the sport mode. In S-gear (sport mode), the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer period. This allows the car to operate at low gears with high RPM for an extended time, resulting in greater torque output and acceleration. For cars frequently driven in congested urban areas, where carbon deposits tend to accumulate in the engine, using the S-gear occasionally can help remove these deposits. Another common mode is the D-gear (drive mode), where the hydraulic control system automatically engages the appropriate forward gear based on throttle opening and vehicle speed signals when the gear lever is placed in D.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.